Since there was almost no protection-against-wind effect of a normal cowl, it purchased. The protection-against-wind effect also actually goes up, and it is good also for appearance. A good point: The - protection-against-wind effect is good.

Since there was almost no protection-against-wind effect of a normal cowl, it purchased.
The protection-against-wind effect also actually goes up, and it is good also for appearance.
A good point: The - protection-against-wind effect is good.
- The kind is abundantly prepared by the purpose.
A bad point: - product precision is low (the screw hole has shifted a little).
- The field of view over a screen is distorted a little (seemingly it will be good if in play [ other ] are seen, but it is --).
Although some difficulties are in product precision, I think that the protection-against-wind effect is also purchased highly and is a disadvantage product which is not. View detail

As a carrier for KSR, it is recommended most. Although an authentic positive one is bent by insufficient strength, not to mention this carrier bends, it can hold and it can raise a car body. moreover -- rusting, since paint application is thickly

As a carrier for KSR, it is recommended most.
Although an authentic positive one is bent by insufficient strength, not to mention this carrier bends, it can hold and it can raise a car body.
moreover -- rusting, since paint application is thickly strong -- etc. -- it is strong.
However, since it is necessary to make a hole in a seat cowl in the case of wearing, if it is disagreeable, I think that the carrier of a rough & road is good.
Moreover, the location in which a hole is made is also difficult for a fault.
But even if it takes it into consideration, in facility, such as reinforcement, a size of a bearing surface, a location, number of hooks, it is recommended best on the carrier for KSR110. View detail

I think that a price is right just. Appearance when it attaches is also very good. Since paint application is not carried out now, it feels refreshed, but I think that appearance becomes good very much since it is due to paint from now on. The

I think that a price is right just.
Appearance when it attaches is also very good.
Since paint application is not carried out now, it feels refreshed, but I think that appearance becomes good very much since it is due to paint from now on.
The design also suits the sheet and I am very much pleased.
since -- evaluation was made into the five stars. View detail

The zoomer (ruckus) which has already transplanted time-tested ZX axle part was equipped. Although the fender of Saitaniya was popular, it was dared to choose the product made from a kitaco with the thick Faulk portion. It reveals and interferes i

The zoomer (ruckus) which has already transplanted time-tested ZX axle part was equipped.
Although the fender of Saitaniya was popular, it was dared to choose the product made from a kitaco with the thick Faulk portion.
It reveals and interferes in a tire considerably.
If molding to the Faulk portion from a nose is too thick and is not cautious of clearance, a tire will split.
since -- I think that I will process only a few in the near future.
Is it unsuitable for wearing of those other than NSR?
(although it is a natural result and becomes empty in other vehicle type appropriation) View detail

appearance American -- it is -- he has no becoming, becoming bright, and coming out and saying!! An instruction manual is also still more intelligible!

appearance American -- it is -- he has no becoming, becoming bright, and coming out and saying!! An instruction manual is also still more intelligible! View detail

It always uses!! When you attach an electric spectaculars, be sure to insert this in between!! As notes, since the line is black, it does not mistake for a minus! And since the fuse is not contained, please prepare it.

It always uses!! When you attach an electric spectaculars, be sure to insert this in between!! As notes, since the line is black, it does not mistake for a minus! And since the fuse is not contained, please prepare it. View detail

It was used in CD50. Attachment is common to a transverse engine, and especially since it will be two bolt + plates if a cover is removed, a difficult thing does not occur. The maximum high speed goes up as a physical feeling, and acceleration fal

It was used in CD50.
Attachment is common to a transverse engine, and especially since it will be two bolt + plates if a cover is removed, a difficult thing does not occur.
The maximum high speed goes up as a physical feeling, and acceleration falls.
They are setting parts rather than calling it tuning parts.
I carry out engine bore up etc. and think that it is good for a direction to carry out the maximum high-speed up.
Although there may also be a vehicle type which is different in part, when it is the transverse engine vehicles of a honda (a cub, the monkey, a chaly, CD, etc.), it is to 16T to be put in without processing of a cover, and if it is not deleted since 17T interferes in a cover, or it is not processed, it is useless. View detail

Since the overhang of a normal blinker was worrisome, it purchased. although the register kit was also purchased collectively, in exchange of a rear chisel, it is unnecessary -- it was . A good point: A parenthesis of - appearance is good. - A

Since the overhang of a normal blinker was worrisome, it purchased.
although the register kit was also purchased collectively, in exchange of a rear chisel, it is unnecessary -- it was .
A good point: A parenthesis of - appearance is good.
- Attachment is easy at double-stick tape (depending on a place, the drilling process for wiring is required).
- Repair parts can purchase with a components single article (I think that this is very conscientious).
A bad point: The cover is not attached to - plug terminal.
although it is mere dress-up parts, subsequently it is alike, and air resistance also decreases, and begins to meet, and it is very pleasing individually. View detail

do you change and understand immediately -- when it changed white from the pure (smile) yellowish color, it was visible to the race ish, and, of course, the visibility of the run at night also went up. The riding of night became pleasant.

do you change and understand immediately -- when it changed white from the pure (smile) yellowish color, it was visible to the race ish, and, of course, the visibility of the run at night also went up.
The riding of night became pleasant. View detail

the LED-ized 3rd phase of own car TDM (smile) -- LED of a position ball -- it is-izing. This as well as a tail lamp is only the handiness exchanged for a pure position ball. It becomes a pale light and is satisfied! Although it is ..., if a headli

the LED-ized 3rd phase of own car TDM (smile) -- LED of a position ball -- it is-izing.
This as well as a tail lamp is only the handiness exchanged for a pure position ball.
It becomes a pale light and is satisfied! Although it is ..., if a headlight is made to turn on simultaneously with a position ball, will you feel it yellow compared with a pale light of LED, although the headlight valve is replaced to the efficient bulb, and will HID become wanting (bitter smile)? View detail

He thought that he would renew the front of a skywave (burgman), and it purchased. Since a color is not reflected at the time of a stop, it is good touch. At the time of a run, in the case of, since the light is switched on as a position, I feel t

He thought that he would renew the front of a skywave (burgman), and it purchased.
Since a color is not reflected at the time of a stop, it is good touch.
At the time of a run, in the case of, since the light is switched on as a position, I feel that the meaning changed as it is pure is lost.
Since it is an article good as goods, in a direction to decide smartly at the time of a stop, it is a recommend! View detail

After spraying to a chain, it brushes firmly. Although started, since it is hard to dry, time and effort can be brushed calmly. Most dirt remained also in the brush after chain cleaning, and it was a state (it seems that the dirt of the brush had

After spraying to a chain, it brushes firmly.
Although started, since it is hard to dry, time and effort can be brushed calmly.
Most dirt remained also in the brush after chain cleaning, and it was a state (it seems that the dirt of the brush had also come off at the time of chain cleaning).
However, since it will wash with water, it is troublesome to make it dry.
It is after [ in my case ] washing. Wipe off, and it neglect -> Wipes off -> half a day, and is -> chain lube. It is the condition to say. View detail

Since there are many calorific powers, there is a cowl, water temperature went up in the twinkling of an eye and the fan started, it attached in order to improve a cooling capability for engine protection. Clearing work is very easy, and it will be fi

Since there are many calorific powers, there is a cowl, water temperature went up in the twinkling of an eye and the fan started, it attached in order to improve a cooling capability for engine protection.
Clearing work is very easy, and it will be finished with several minutes if it is not hidden under the tank etc. only by exchanging for a radiator cap.
Seemingly, that [ an effect's ] which has attached the thermostat will be high, since pressure is heightened and a cooling capability is improved, although I had you teach from the motorcycle store.
traffic congestion long after all -- a water temperature top -- it is better for a price to be also by cheap touch that come out and it asks sushi LLC for +alpha engine performance, since it becomes difficult to go up after exchange by the scene of there there and its water temperature cools easily in it although kept.
Since the effect can be checked by the digital temp meter wearing vehicle, even if it changes a motorcycle, the radiator cap was removed and is attached also to the following motorcycle. View detail

Since it was hard to carry out receipts and payments of a load, there being no damper in a sheet moreover and pressing [ sheet under space of foresight was narrow, and ] down a sheet, this case was purchased. Since it is OK even if one full face and o

Since it was hard to carry out receipts and payments of a load, there being no damper in a sheet moreover and pressing [ sheet under space of foresight was narrow, and ] down a sheet, this case was purchased.
Since it is OK even if one full face and one jet put even a glove into it, it is found useful.
Attachment is also easy. View detail

Although there are other VM26 of Mukawa and PE28 kits as a simple and convenient big carburetor with which KSR can be equipped, VM26 kit of a kitaco is recommended individually. The greatest reason is that it can use the air cleaner BOX. However,

Although there are other VM26 of Mukawa and PE28 kits as a simple and convenient big carburetor with which KSR can be equipped, VM26 kit of a kitaco is recommended individually.
The greatest reason is that it can use the air cleaner BOX.
However, unless it processes an air cleaner, setting does not come out of it.
Although I am exchanging for the muffler of bore up and nojima at 125 cc, a hole is made in an air cleaner so that it may be in a picture (unless an inquiry also carries out a hose intentionally in case of this place at the time of a car wash, water does not permeate probably.).
Water did not permeate the rain of the typhoon. The rubber of the air inlet currently originally attached to the air cleaner box is removed (he is the fellow stuck in the frame).
Where it came out and a filter is changed into the turbo filter of a daytona, as for the main jet 155 and a throw jet, the clip of 10 and a needle is 2 rotation return, and the top and the air screw can run it safely for the time being.
This carburetor is recommended that run ordinarily, and also Power rides easily not the comparison of normal but in order to come out, and for peak power not to become high rotation slippage but to increase the whole region from low rotation, even if the tolerance of setting is wide and shifts somewhat.
Since it is easy to treat especially in the direction which it is inexperienced in carburetor exchange and has uneasiness in the act of setting, etc. by motorcycle to Kon, it is recommended as first large caliber carburetor by all means. View detail

ZZR250 thought that it would attach even to a handle since Locke of the helmet was not able to be carried out unless it opened the sheet, and purchased. Although a path did not suit but the rubber needed to be deleted a little with the file at the tim

ZZR250 thought that it would attach even to a handle since Locke of the helmet was not able to be carried out unless it opened the sheet, and purchased.
Although a path did not suit but the rubber needed to be deleted a little with the file at the time of attachment, it is attached exactly and, now, is found useful. View detail

It purchased to xr250. Since it motorcycle-stand-self--object-began and was purchased and used, although a comparison is impossible, it becomes comment below. - The big power of the lift up down itself is also unnecessary, and it is simple for it.

It purchased to xr250.
Since it motorcycle-stand-self--object-began and was purchased and used, although a comparison is impossible, it becomes comment below.
- The big power of the lift up down itself is also unnecessary, and it is simple for it.
- A problem can be made for there to be nothing, if it gets used although setting to a good location worried at first (I think that it changes also with motorcycles).
- A treading-in lever is somewhat short.
In pedals, it breaks in and is hard to carry out.
- A lever opens at the time of storage and conveyance, and troublesome.
Locke in a lever top wooden-clogs state is satisfied as for the time being cheapest stand with a lift needed. View detail

The red of the daytona was used until he bought this. Since there was admiration [ that it is somewhat hard / elapse ] after changing the torque cam to the straight gash, it changed into the product made from a chameleon factory. A pulley is the y

The red of the daytona was used until he bought this.
Since there was admiration [ that it is somewhat hard / elapse ] after changing the torque cam to the straight gash, it changed into the product made from a chameleon factory.
A pulley is the yokozuna 90 and got acceleration without militant rotational frequency, the highest kick down conjointly, and a valley.
Can he enjoy himself exchanging many things, since it is not so big-ticket goods? View detail

It is necessary to remove a tandem step. In my case, the semi-racing baffle is also attached, but sound with which a heavy low is effective and it was filled for a while is the feature. In an external muffler, I think that it is a quiet category.

It is necessary to remove a tandem step.
In my case, the semi-racing baffle is also attached, but sound with which a heavy low is effective and it was filled for a while is the feature.
In an external muffler, I think that it is a quiet category.
Although appearance and sound are pleasing, if it is going to start the engine, regrettably one kick pedal is likely to interfere. View detail

Playing truant going up is a psycho because of a straight configuration. Low-pitched sound sounds in idling. The sound with which it was filled near 4000 rpm feels it jarring.

Playing truant going up is a psycho because of a straight configuration.
Low-pitched sound sounds in idling.
The sound with which it was filled near 4000 rpm feels it jarring. View detail