Reviews
Kijima ACC branch harness kit
I haven't installed it yet, but it's good because the quality of the product and the product are excellent. I'll use it well. Thank you for the meticulous packaging and sending. View detail
I can't install it on my bike jb03
The quality is well made It's jb03 about the feeling of use, and I bought it after seeing it installed on YouTube, but I couldn't find it Cost performance and comparison to other products Kitako products are easy to distribute, but the headlights may not close Delivery and packaging to WeBike in a week The packaging is great Concerns when purchasing Please check the jack and purchase it. I looked all over the line but couldn't see it View detail
High beamWiring
Mounted on Axis Treat
Purchased to add USB power supply
USB power supply cannot be used unless High beam is ON at High beam in Wiring.
View detail
suzuki V-strom650 L8
Interrupt Harness to secure the power line because we don't want to damage the Wiring View detail
Fits: YAMAHA NMAX, YAMAHA CYGNUS X SR, YAMAHA NMAX155
I was able to use it on my Ninja 1000.
I used this on a 2017 Ninja 1000; I took power for Relay operation from the Coupler on the License Plate Light.
Just by interrupting the Coupler, you can get the power supply without modifying the lines of the vehicle.
For Ninja1000, Plus and Minus are reversed, so it is necessary to remove the pin from Coupler and replace it or replace Bullet Type Terminal.
The cable is thin, so it is better not to connect the electrical equipment which needs large current.
In my case, I changed the License Plate Light from a bulb to an LED and decided that it was not a problem because I use only the power supply for Relay operation.
There are also Couplers that are similar in shape to the common Waterproof 2-pole Coupler, the MT090WaterproofILSeries and MT090WaterproofALSeries are slightly different in shape. Check your vehicle's Coupler carefully before purchasing.
View detail
ACC branching with ease
I used it for my HORNET 250.
The product I received did not have HORNET listed in the fitment, but I was able to use it with no problem.
View detail
Fits: YAMAHA NMAX, YAMAHA CYGNUS X SR, YAMAHA NMAX155
Just plug it into the ServiceCoupler!
I installed it on a CYGNUSX SR Model 5.
If you remove the top cover from the front, you can see the Service Coupler, and if you remove the end cap, you can install it with Bolt On.
It is for Cigar socket and USB power supply, so I think Wiring is a little thin, but I will try it for a while.
View detail
Fits: YAMAHA NMAX, YAMAHA CYGNUS X SR, YAMAHA NMAX155
Very good product!
I bought this to install a Grip heater on my NMAX and the power supply for the Grip heater can be easily removed without having to modify the Harness, it is SMART because it can be removed with a couplet-on. View detail
Fits: YAMAHA NMAX, YAMAHA CYGNUS X SR, YAMAHA NMAX155
Easy
When I think of making power supply extraction branch Harness by myself, it is quite Large strange If it is a small device of the power consumption, it may be enough with Electro Tap etc., but this time Take out the ACC electron microscope of the Cigar socket (up to 120W, 10A), and you can see the following Prepare a solid one
As for the CYGNUS, the instruction manual is clear and satisfactory I ended up preparing a branch line to take out two power sources, the Cigar socket and the USB
View detail
Fits: HONDA FAZE, HONDA FORZA(MF10), HONDA PCX150, HONDA PCX125
It is a useful part
I use it with CB 1100, but in the case of Headlight, Socket of Attachment power supply is prepared, and by connecting to it, I was able to take the power supply of electrical equipment.
We are mainly connecting the power supply of T Brett and Cigar lighter socket.
View detail
Fits: YAMAHA NMAX, YAMAHA CYGNUS X SR, YAMAHA NMAX155
You can use it as it is
Perhaps it is cheaper than making Wiring? In the past you used to make such a bean like this?
It would be nice if you could buy a lot and make more, but maybe even if you buy it
Only this product is fine
View detail
Fits: SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125S, YAMAHA CYGNUS X FI, YAMAHA BWS125(BWS), YAMAHA Axis Treat
They installed it nicely
I used it to take power out of my Cygnus X-SE44J car navigation system
Remove the Cygnus handlebar cover and connect it to the accessory cord and you're done Now I just need to wire the navigation sockets and I'm done again
It was easy to do with a snap, but it takes a little time to remove the light cover etc. for the scooter I wonder if it will take
View detail
CROSSCUB installation required a simple remodeling
I wanted to install a USB charge socket in CROSSCUB and I found that it seems that it can be attached with Net, so it seems that CROSSCUB seemed to be different in Wiring of Earth, so it could not be used as it was. (Abunai dangerous ^ ^;;)
To use with CROSSCUB, you need to replace GreenBlack of Connector and Wiring of Green. Modification is easy so there is no problem at all.
Net information is not taken into account but confirmation by Wiring diagram or Tester is very large thing (Lol)
View detail
DIY It's Exactly handy for you.
It is GOOD becoming WaterproofCoupler.
However, since the RedBlack line for taking out was a Bullet Terminal like the image, 2-pole Waterproof Coupler is prepared separately.
View detail
Fits: YAMAHA NMAX, YAMAHA CYGNUS X SR, YAMAHA NMAX155
Grip heater Best for convenient installation
I used it to attach a Grip heater to NMAX.
The Instruction Manual is also solid, just plug the Coupler into the Accessories power supply as instructed and connect Wiring to the Grip heater side.
Until now it is really useful to think that you were pulling out the power while watching the Wiring diagram of the Tail lamp or the Wiring diagram.
I think that anyone can use Cowl and if you can do Wiring without mistaking it. It's a fancy Parts, but it's a really wonderful item.
* In the Instruction Manual, NMAX had Minus on the car Both SidesEarth, but when I tried it by connecting Wiring normally, I was able to take power without problems.
View detail
Fits: SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125S, YAMAHA CYGNUS X FI, YAMAHA BWS125(BWS), YAMAHA Axis Treat
Recommendation for Custom's time
【What made you decide the purchase?】 Reducing the effort of Wiring process at Custom.
【How was it actually used?】 It's easy because Extra Processing Not Required.
【Was it difficult to install? (Hard parts case)】 It's easy to just cheat.
【Please tell me the point of installation and hang (in the case of Hard parts)】 Any
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) 】Any
[Is there anything I was disappointed about?] None. I am satisfied with this price.
【Hope for Manufacturer - Please tell me if there are any improvement points] No. I do not want out of print.
【Have you compared items?】 None.
[Others] Any
View detail
Fits: YAMAHA NMAX, YAMAHA CYGNUS X SR, YAMAHA NMAX155
Wiring refreshing
Purchase for NMAX USB power supply retrieval. I tried connecting the USBConnector with the prepared Bullet Terminal but do not energize. Apparently when using it with NMAX, it seems that it will not normally turn on unless - side is taken from Body rather than Bullet Terminal. If you contact Manufacturer, it seems to work normally with CYGNUS. View detail
Powering USB.
【What made you decide the purchase?】 Required
Since you can easily secure the ACC power supply.
【How was it actually used?】 Required
It is convenient because it can be taken out without damaging Wiring of the car body.
【Was it difficult to install? (Hard parts case)】 Any
Easy because it just breaks into an empty Coupler.
【Please tell me the point of installation and hang (in the case of Hard parts)】 Any
An amateur can do it, too..
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) 】Any
[Is there anything I was disappointed about?] Required
None
【Hope for Manufacturer - Please let me know if there are any improvement points】 Required
None
【Have you compared items?】 Required
None
[Others] Any
View detail
Fits: HONDA FAZE, HONDA FORZA(MF10), HONDA PCX150, HONDA PCX125
In PCX, Wiring is reverse
I purchased this product because it is Large strange to buy Socket.
It is convenient to take ACCWiring, but if you check the Wiring diagram, it seems that Red is connected with Earth, Black is connected with ACCPlus Wiring, and Image is the reverse.
I think that it is better to check Wiring without believing the color.
It's more secure than just processing Oiring Wiring, so it is recommended not to make even a color mistake.
View detail
Fits: SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125S, YAMAHA CYGNUS X FI, YAMAHA BWS125(BWS), YAMAHA Axis Treat
Easy and convenient.
I used it for installing the Grip heater of CYGNUS X, but it is very useful.
Durability and appearance worsen if you process it by yourself, but if it is this item it will be finished in Beauty and you can rest assured.
View detail