Rear Fender

I asked for an ODAX MeshFender just because it looks so cool!
I had to wait about 3 months to have it installed due to the world situation, but it looks Psycho lol.
It has a good reputation among people around me, but I know, but there are too many mesh parts, so it prevents mud, but it makes the Fender dirty lol.

But I think it's cool! View detail

I feel I'm getting more powerful

Inner fender equipped with OEM was Small, so I tried to replace it because it was awful because the mud dirt after running was terrible.
Installation was easy with Bolt-on.
The accuracy of the Screw hole is also good, it is safe.
I did not understand Instruction Manual in English version, but I think you will understand when working while looking at photos.
It seems that it was better to stop stopping Screw from Right Side in the order of installation.

I feel that the atmosphere around Rear after installation has changed from thin body type to muscular body type.

I think that it can be done in half an hour if you are familiar with the installation. View detail

I searched for items that are not attached to Chain case.

I also wrote in the overall review, but I got to this item as I looked for something that did not have Chain case.

Color is not painted, and there is no sense of incongruity although it is attached with the original Luster Yes Black as it is.

I installed it myself, but the working time is about 1 hour.

I fixed Bracket for Body installation to Swingarm of Right Side, but that Bracket was Silver.
My vehicle is a 2010 formula and Swingarm is Black Spec. So, Bracket painted with Black before installation.

I think that the impression attached is fewer than the products of other companies' Carbon, but I think that this degree is exactly right personally. - - - Not young (Lol)

Although I was worried about whether the accuracy of the product was low overseas, although there was also a place where some finishing was bad, I think that there is no problem because it was about the extent that I could fix it myself. (Since the finish of the edge part was bad partly, I finished it with sandpaper by myself) View detail

It corresponds to Tire ...

It's a good shape, but if you do not have a gap in Swingarm, it hits Tire.
(Bridgestone, RS 10)
If you open the gap, it will fit once, but it looks bad. View detail

Mud measures measures (Lol)

I bought it as a Fender Eliminator and the mud was purchased as a countermeasure again! Because it is Large earlier than NORMAL, it seems to be somewhat effective, but it was somewhat difficult.
- Manual version does not understand English version ... (sweat) Because it is with a photo, somehow.
Did it (Lol)
- Mounting Bracket hole and FenderBody hole are misaligned
Bracket upside down and corresponded (sweat)
It's a little disappointing, but since it's nice to see Parenthesis,
To (Lol) View detail

Product description is unkind

It is Built in Chain Guard. It is ambiguous whether it is whether there is Chain guard if it is item explanation, is not it?

It was perfect for installation. There is no Tie Wrap clasp, Right Side comes with a mall and the floating is suppressed. View detail

For Mudguard

I bought it because it was cheaper than other company's Manufacturer. When installing Right Side Mounting of the gold tool did not match and Drill opened a hole in the gold tool and installed. Other than that it was able to install properly. It is wider than OEM, so it got dirtier than before. The appearance is also good Parenthesis. View detail

First time installing Inner fender

Installation was easy to install even without looking at the Instruction Manual. Because Mesh stands out, I think it's quite good. Right Side 's HoseBracket has opened easily with two Pliers. View detail

Mud can reduce expectation

It is longer than OEM's Rear inner fender so it can be expected to reduce mud.
However, at the time of installation, the hole fixing the Chain guard and Hugger did not fit, and it was decided to forcibly fit the hole.
And one of the included Flange nuts was not Screwed and could not be used.
Because I am not cheap shopping, I want the quality to be firm. View detail

It fits perfectly

The color was not good, so I frosted with Mad ClearSpray. It also fits perfectly without any problems in installation. I like Design very much. Of course the dirt of the suspension ceased to exist View detail

Can mitigate mud splash

I do not know whether OEM's Inner fender is caused by a short one or a narrow width, but I do not have a mud splash.
Basically it does not run in rainy weather, but in Tunnel there are many cases of Wet, I was concerned about how dirt around Rear. When I installed this Inner fender, it was considerably reduced.
Design is a place where preference is divided, but the only regrettable thing is that the previous product was glossy but now it is only selling Matte Black.
If I change the Rear suspension to OHLINS, the ROD part comes behind so I think that replacing the Inner fender is essential. View detail

Installation was a breeze! And, it does look good! I had to push the brake hose bracket inward a bit to fit. But this does make look better with the fender eliminator kit. And I have attached the matching color of Under Cowl also. Please see the photo!

Installation was a breeze! And, it does look good! I had to push the brake hose bracket inward a bit to fit. But this does make look better with the fender eliminator kit. And I have attached the matching color of Under Cowl also. Please see the photo! View detail

Inner-fender purchase was considered and it opted for purchase in play [ Cost ] etc. Although the delivery date took time, it received earlier than the scheduled date and was able to do. Although it is about goods, I think that overall form is good, and

Inner-fender purchase was considered and it opted for purchase in play [ Cost ] etc. Although the delivery date took time, it received earlier than the scheduled date and was able to do. Although it is about goods, I think that overall form is good, and I think that it is good that it can be hard to break construction material. Although I considered the goods merely sent this time, the Cut of the Chain-cover portion was slanting and they were Shocks. Since the Cut side was in the rough-planed state, when the Cut side was prepared with the file, a Cut side was not straight in a Chain-cover part, and he noticed deleting too much clearly. Although the exchange request was not carried out since goods were already modified Be careful of those where it will be purchased from now on. Since width became thin although own strength correction was made, it was moderate, stopped and equipped. Since it is a place which is not easily visible due to a Muffler ... However, Shock! Attachment took pains over fixation of the Hose guide (product made of resin) which followed the Fender rather than having removed a pure Hose guide. Since it has not entered however it may press down in the hole of a Plate, it fights for tens minutes. It was like [ which is regarded as whether for it to give up and to stop fixation ]. A Mesh portion becomes an Accent and the touch with which it equipped thinks that it is good. View detail