Reviews
Fits: HONDA CRF250L, HONDA CRF250M, HONDA CRF250L(S), HONDA CRF250RALLY, HONDA CRF250RALLY(S)
Replaced at the same time as Brake pedal!
I had to replace the brake pedal with a ZETA pedal, so I replaced this one at the same time. View detail
Fits: KAWASAKI D Tracker X, KAWASAKI D tracker, KAWASAKI KLX250
Installed on a Kawasaki KLX125.
buying habits
Installed on a Kawasaki KLX125.
Fixed Type of Normal change pedal is used when you fall over.
We are looking for Foldable due to the risk of bending and damage.
I did a lot of research and chose this one.
Nice thing
The appearance Red becomes Accent and Parenthesis is good.
Compared to the Normal Change Pedal, the tip of the Change Pedal is foldable, so it can be used when the pedal falls over or is caught on an obstacle.
In the unlikely event of an accident, the possibility of damage is reduced and peace of mind is assured.
Where to become anxious
Nothing in particular, but if you have other colors such as Blue or Green Light, etc.
I am glad to have more options.
General review
Red color makes it different from NORMAL in appearance and
The best part is that it is Foldable, so it is a safe insurance policy in case of an emergency.
Installation is easy, so we highly recommend these custom parts.
View detail
Fits: KAWASAKI D Tracker X, KAWASAKI D tracker, KAWASAKI KLX250
enough
There is a Revolver Shift Lever on top of this from Zita, but I think this product is sufficient.
Compared to the NORMAL, the quality and reliability of this product is far superior, and it is hard to believe that it is in the 3,000-yen range.
I think it is a very high cost performance product.
View detail
it's tightly wound
The ZeroGee Shift Pedal I had been using on my WR250X started to rattle, so I replaced it with this one.
It is TIGHTLY and easy to use.
View detail
Fits: HONDA CRF250L, HONDA CRF250M, HONDA CRF250L(S), HONDA CRF250RALLY, HONDA CRF250RALLY(S)
It was cheaper than OEM ??
I got a quote and it was cheaper than OEM, it's a Repeater. It's lightweight and looks good!
Although only one screw is required for installation, it is recommended to apply a loosening lubricant.
Foldable& forged and hard to bend. If it bends, I don't know if it's fixable. I failed, although the OEM is steel so there is a one chance.
View detail
Great quality regardless of price.
Purchased Zeta shift lever to replace my stock crf lever (bent like a pretzel). The new lever is significantly lighter than stock and has nice boot feel when shifting.Wouldnt recommend for those with short feet, but it is a really awesome accent to any bike. My old shifter was stubby and the splines where wearing out and lever had a lot of slop in it. This one went right on and had zero slop in it. Anodizing is still holding up after many hours.I would recommend as an upgrade. View detail
Fits: HONDA CRF250L, HONDA CRF250M, HONDA CRF250L(S), HONDA CRF250RALLY, HONDA CRF250RALLY(S)
I guess I am concerned about the direction of Bolt fixation.
The OEM Shift Pedal bent after a fall, so I switched to the Foldable Pedal, which weighs less and is easier to install than the OEM Pedal. The only concern I have is that the bolt is the opposite of the OEM one, which is tightened from the bottom up, so I'm a little worried about loosening or falling off. It would be great if this point could be improved, but considering the price, I am satisfied. View detail
Fits: YAMAHA YZ125X, YAMAHA YZ250X, YAMAHA YZ125, YAMAHA YZ250
Costa is not bad, Costa is not bad.
The OEM Bolt and the Spec. to be tightened from the opposite side are installed in the OEM position because the AfterManufacturer's Under GuardBracket interferes with the OEM Bolt.
The Bolt is terribly difficult to tighten, so it is very troublesome to install.
View detail
Fits: YAMAHA Lanza (DT230), HONDA CRF70F, HONDA CRM50, HONDA CRM80, HONDA CRF50F, HONDA CRF125F
Cool and secure Up.
[How is it used?
I just put it on and haven't ridden it yet.
Was the one you received as per Image?
It was just like the Image. The texture was also good.
Was the installation difficult?
Simply remove one Bolt and replace it. It is easy.
How was your experience with it?
Is it almost as good as NORMAL? I don't know because I haven't rolled it yet, but I don't rely on OEM,
[Included Parts:were they on?
None
[Was there anything that disappointed you?
So far, none
View detail
Fits: HONDA CRF250L, HONDA CRF250M, HONDA CRF250L(S), HONDA CRF250RALLY, HONDA CRF250RALLY(S)
Mounted on SL230
With the sl230 LINK-type Shift Pedal, I couldn't raise it much upward, and it was too close, so I attached it directly.
The sl230 is Rear Sets compared to the current TRAIL cars, so it is like a TRIAL car.
Shift cannot be done without putting the feet forward.
But Shift touch is now Direct and
No more mistakes hitting the Shift Pedal by mistake.
View detail
Fits: HONDA CRF250L, HONDA CRF250M, HONDA CRF250L(S), HONDA CRF250RALLY, HONDA CRF250RALLY(S)
Shift touch is Up
In NORMAL, there was sometimes a shift loss, but it was nice and solid with a nice clicky feel. It also looks cool! View detail
Fits: HONDA CRF250L, HONDA CRF250M, HONDA CRF250L(S), HONDA CRF250RALLY, HONDA CRF250RALLY(S)
To be installed on SL230
Can't say for sure since Motorcycle hasn't been delivered yet.
SL is a LINK type Shift Pedal, but I decided to buy it for direct attachment.
I will make an impression when I install it again.
View detail
Fits: HONDA CRF250L, HONDA CRF250M, HONDA CRF250L(S), HONDA CRF250RALLY, HONDA CRF250RALLY(S)
Didn't last 2 years, but consumable!
Required Tools
8mmSpanner (Socket has no working Space…)
It did not last 2 years after being replaced from OEM.
If true, it should have been sooner because I should have changed it earlier.
The way it broke this time? The whole thing is twisted to hit the inside and the Engine side has been put away…
I think this would require replacing the entire Body even with the expensive Revolver, so I think this is more cost-effective than the Revolver.
View detail
Can Shift Firmly
Shift feel can be shifted reliably as Snap.
The quality is high and the construction is so solid that it is unlikely to break easily.
Installation is also done by anyone, as it is just a matter of removing and replacing the OEM.
I think it's good
View detail
Fits: KAWASAKI D Tracker X, KAWASAKI D tracker, KAWASAKI KLX250, KAWASAKI KLX250
Replace with OEM Product and Up the operability!
This product is an aluminum cut-out with a high quality feel and can be easily dressed up by simply replacing the OEM Product's Pedal! The price is reasonable, so we expect it to be durable. View detail
Fits: KAWASAKI D Tracker X, KAWASAKI D tracker, KAWASAKI KLX250, KAWASAKI KLX250
D Introduced to improve Tracker's appearance
[How is it used?
Installed on a 2005 D Tracker.
The driving use is Touring Main.
Used for about 3 years. replacement from OEMShiftChange Pedal.
Was the one you received as per Image?
The Black of the Body was good, and the Red alumite of the Shift peg was also a favorite color of the Large.
Was the installation difficult?
It is very easy to install by simply loosening the bolt.
Large sturdy because it does not lick Bolt if you have a good precision tool.
How was your experience with it?
From the OEMShiftChange Pedal, the appearance and ease of shifting due to the increased stiffness has been improved.
We did not use it in Race because we did not want to bend or scrape it due to falls.
The holding of Red's Anodized was not so good, even for Touring use, since it is the part that is operated all the time.
The red anodized part is knurl-processed, which is easy to operate and excellent for catching, but the damage to shoes is large, and genuine leather, Nylon, and synthetic leather are quite rough, so care should be taken.
I don't see any problem with off-road boots, etc.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Point and hang of installation
When replacing the Change Pedal, it is recommended to clean the parts with parts cleanerretc. together with the Change Pedal, since the parts where the Change Pedal is installed are quite likely to be sticky with chain lubes.
Spline mating must be installed in tight alignment.
View detail
Fits: HONDA XR250R, HONDA XR400R, HONDA XLR250R, HONDA XLR250R BAJA, HONDA XR250, HONDA XR250 BAJA, HONDA XR250 MOTARD, KAWASAKI KLX125, KAWASAKI D-TRACKER125, KAWASAKI KLX150BF, KAWASAKI KLX150L
From OEM
The OEMShift got stuck in a debris field and bent immediately.
Since it is not Foldable, I installed this one.
They seem to be more durable than the OEM ones, but I think I will replace them again for off-road driving.
The price is a little higher than KITACO, which is not ZETA, but it has more brand power. I recommend it.
View detail
Fits: HONDA XR250R, HONDA XR400R, HONDA XLR250R, HONDA XLR250R BAJA, HONDA XR250, HONDA XR250 BAJA, HONDA XR250 MOTARD, KAWASAKI KLX125, KAWASAKI D-TRACKER125, KAWASAKI KLX150BF, KAWASAKI KLX150L
If you run off-road, Foldable is a must!
I use it on my KLX150L. I used KX one on my previous KLX125, but I am satisfied with Pedal which is light and same price. View detail
Once again, it is still good!
I put this one on my wife's WR250X 2009 model, which is used exclusively for course driving.
This is a transplant from our WR250X. And I used the OEM Shift Pedal for a long time, but I was reminded of the goodness of this Shift Pedal because the Touch is not clear and there is no rigidity.
I'm thinking about buying another one.
View detail
Fits: HONDA CRF250L, HONDA CRF250M, HONDA CRF250L(S), HONDA CRF250RALLY, HONDA CRF250RALLY(S)
Sturdy Shift Pedal
[How is it used?
The OEM Product's Shift Pedal bends a lot, so I was looking for a pedal that was less likely to bend, and I found it.
I'm using it with xr230.
Was the one you received as per Image?
It's a reliable-looking ZETA build and doesn't look out of place at all.
Was the installation difficult?
It's no different from NORMAL because it's just fixed to Spindle with Bolt as same as OEM Product.
It's not Revolver, so no screw lock agent is needed.
How was your experience with it?
The operability is no Large difference at all from NORMAL.
It's made of thick gold and doesn't seem to bend even if it falls over and hits a rock.
[Included Parts:were they on?
The Bolt is already attached, so there were no extra Included Parts:. There are no parts to lose.
[Was there anything that disappointed you?
It's generally as Image, not.
Large Satisfied
View detail