Reviews
It is an essential item.
Required to attach Side Back
Quantity:Pair (for Left and Right) In Quantity:1 Set, so it was good.
It was easy to install and I'm glad I bought it.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA CROSS CUB50, HONDA CROSSCUB110
Left Only installed.
KIJIMA's Exclusive Design so it could be pontooned.
Good for putting on weight back though,
Bracket may be a little too large for SmallBack.
View detail
Fits: TRIUMPH StreetTwin, TRIUMPH BONNEVILLE T120, TRIUMPH BONNEVILLE T100
Solid construction.
Mounted on BONNEVILLET120Left Side.
Side bag is my favorite Henly Begins that I used on my W800. It was installed without any problem.
The clearance with the rear shock has been secured and there is no interference. The welding and painting are well done.
The only drawback is that KIJIMA's Helmet lock is difficult to use when KIJIMA's side bag support is attached. So I moved the helmet lock to the right side.
The Tandem Footpeg side has round holes in the flat plate, but it would be better if the holes were slightly longer so that the angle of the side bag support can be adjusted.
View detail
Required for Side bag
Installation was fine with the bolt on. The only thing is that there was a little bit of rust floating on the weld plating, so I gave it 3 stars for quality. View detail
Not bad
Do you have enough Screw Mounts when used with Helmet holder?
I'm worried about that, but I'll run it anyway and if it doesn't work, I'll remove it.
View detail
Fits: TRIUMPH StreetTwin, TRIUMPH BONNEVILLE T120, TRIUMPH BONNEVILLE T100
of high quality
[How is it used?
I installed it on my BONNEVILLE T120.
Was the one you received as per Image?
It is just like the product picture, the texture of the black paint is close to the black of the frame of the car body, so there is no sense of discomfort.
Was the installation difficult?
Basic tools for servicing a car or motorcycle are all that is required.
I used Hexagonal Wrench to remove the screw on the top of Suspension, Pliers and Slotted screwdriver to remove Tandem Footpeg, Hexagonal Wrench and Glasses Wrench to remove Tandem FootpegBracket. Glasses Wrench was used to remove the Tandem FootpegBracket, and Socket wrench was used to tighten the upper part of the Suspension after Bag Support was installed.
For Tandem Footpeg, I used Pliers and a slotted screwdriver to remove the Clip-like part that holds the shaft of the footpeg. After that, if you pull out the shaft, the footpeg will come off, but please be careful because the gold ball and spring attached to the footpeg are easy to fall off.
How was your experience with it?
Of course, it is convenient to be able to attach a bag, but even if you don't attach a bag, you can use the Loop for the Belt attached to the Support as a place to attach the Loading Hook.
[Included Parts:were they on?
It is necessary to exchange the screw of the upper part of Suspension to Includeed Parts:by the relation of the shape when installing it in T120, but it was attached properly. I don't know the details, but Material:It looks like Stainless Steel, so it is not likely to deteriorate over time.
[Was there anything that disappointed you?
The explanation in the Instruction Manual is sufficient, but I think that the installation of the removed Tandem Footpeg is a little tricky. It is good to look at the other side carefully and work carefully.
View detail
Fits: HONDA Rebel300, HONDA Rebel 500, HONDA Rebel 250, HONDA Rebel 250
Saddle bag bracket
I rode the Rebel 500. This time I can buy a saddle bag bracket. The bracket is of good quality and doesn't look good on the car. I don't have a matching bag yet, so it's not a good choice to choose a matching bag! ---------------------------------------------- I ride Renegade 500 , this is enough to buy a saddle bag stand, stand a good quality, installed in the car does not look good, not supporting the bag, the bag is not a good choice for supporting! Powered by Google Translator View detail
Side Back, in order to attach the Tool bag
I bought it to attach the Side Back and Tool bag.
Bolt On makes it easy to attach.
View detail
Exclusive Design
It's a pompous design only because of Exclusive Design.
Unfortunately, we don't have a side bag at the moment, so we haven't been able to test its performance.
It's a slender material, with modest self-assertion, but no distortion and no wobble after installation.
The bag is strong enough to prevent entrapment.
View detail
Fits: HONDA Rebel300, HONDA Rebel 500, HONDA Rebel 250, HONDA Rebel 250
It works fine
When I bought it, the reble was not yet as popular as it is now, so Parts were limited. Thanks to KIJIMA for being one of the first to bring out a great cosmetic product! View detail
High Quality Sidebag Bracket From Kijima
This is the second product I've purchased from Kijima, it didn't disappoint me. Overall the quality is good but only time will tell. Come with addition bolts, longer ones. You may or may not use it. Installation is a no-brainer and it it doesn't take me more than 20 minutes to complete the installation. I have made enquiries whether they come in black paint but they only come in chrome plated for this bracket. Most of their brackets do have a choice of black paint and chrome plated. I would have chosen the black painted one to go seamlessly with the chassis. View detail
Fits: HONDA Rebel300, HONDA Rebel 500, HONDA Rebel 250, HONDA Rebel 250
I'm convinced!
I received it today and immediately installed it on my Rebel 250
It's easy to install and can be installed in a matter of minutes
I'm going to put my Saddle Bag on and go touring now!
View detail
Good!!!
Year 19 RS1100 1. Fits perfectly without any difficulties or difficulties to install. 2. It does not change much even in the installed state. 3. It can be fixed with existing bolts and seems to be firmly fixed. 4. There is a picture of mounting, but it doesn't go up... 19 year RS1100 1. Fitted without difficulty or difficulty in mounting. 2. It does not change much even when it is mounted. 3. It can be fixed with existing bolt and seems to be fixed firmly. 4. There is a mounting picture, but it does not climb ... translated by Google Translator View detail