Radiator core guard

We have used this manufacturer's products in our previous vehicles, so we chose them again this time.
Installation is also easy as it is hooked on top and tightened together with the Cover. View detail

High precision, high quality ... high price

As one would expect from the high price, the construction is very good.

I thought it was not appropriate for the SV650, which has a low body price, but Material:This one from Stainless Steel is very satisfactory. View detail

It's still better to have it.

I bought it for CB1000R because it is a standard item and I have used it on my previous BANDIT and the quality is good.

The installation procedure is not particularly difficult if you follow the Instruction Manual.

However, there is a point where it is a little difficult to put it on because of the precision of the design. (I think it's an individual vehicle difference)

One thing to note about the CB1000R is that the Quantity:Pair (for Left and Right) Radiator Shroud should be removed before working on the
When removing the small 8mm head bolt on the top that holds the radiator in place, if you are not careful, the bolt will be tightened with a lot of torque, and if you are careless or careless, the tool will hit the fork. "Gari." as ... (e.g. "as bright as day", "as beautiful as a rose") (… let's die) become…. View detail

High price but high satisfaction.

I installed it on a 2023 Ninja 400.
While there are similar products for the purpose of protecting Radiator, we chose this one with a good product description and no unnecessary decoration.
There were five colors for Emblem, and I had a hard time deciding, but I chose Green to match the color of the car body.

The Instruction Manual for installation is minimal, but I think the only thing to pay attention to is the orientation of the clip-shaped parts that fit into the Radiator.
The Instruction Manual and the installation process on the Internet show that the cowl should be removed and installed, but the installation could be done without removing the cowl.
However, it is quite difficult to install the hexagonal bolt without removing the cowl. If you do not use a hexagonal wrench with long legs, the upper bolt will not turn well because the wrench will get caught in the cowl.
If you have the time and space to do the work, we recommend removing and installing Cowl.

I used the wrench that came with the for Motorcycle multifunction tool, straightened it out to turn the bolt, and used a regular L-shaped wrench for the final tightening.

I was worried that the cooling efficiency would drop in the large size, but it does not seem to have deteriorated that much.
The water temperature gauge rises in traffic, but the difference from when it is not installed is almost imperceptible, and once the car starts running, the water temperature drops properly. At least in normal city driving and touring, the decrease in cooling efficiency is not a concern, but we will see what happens in the middle of summer.

I looked in after driving on the highway and found insects on the Guard.
So the Guard effect was strong.

It is expensive and not located in a conspicuous place, so it is not so effective as a dress-up effect. However, Radiator does guard you properly and you will be satisfied with the quality parts. I recommend it as a practical and invisible fashion. View detail

Silver Color Best Match

I chose Silver color to match with CB1000R's Aluminum color. I was worried about Black color, but I am happy to choose Silver color. As for the protection performance, I think there is enough protection against stepping stones because the middle is fine grained. Also, it is rough at both ends, so cooling performance is not a problem. (As for the performance side, I think that it changes by the way of running, please take it as a reference * It is the impression when using Touring) View detail

Price is high, but I'm satisfied with the quality and accuracy.

I bought it because it looks and performs well in the CB1000R's Core guard.
The mesh is fine and does not interfere with cooling + seems to have the ability to prevent small stones etc.
The price is high, so it's not a good cosmetic product, but I'm happy with the texture and accuracy.

The Instruction Manual says to remove and install the two bolts.
It is difficult to install the Radiator unless you remove the cover on the side of the Radiator in addition to the specified Bolt.
The installation itself was easy, although the Instruction Manual is a little unfriendly. View detail

I am satisfied

Purchased for the XSR700
I wasn't sure if it was Made by HURRICANE or not, but I liked the design of this one I chose Black
It's easy to install, just remove the Bolt from 8 points and install it between the bolts, so it takes less than 15 minutes It is completed without
The quality is good and there is a sense of luxury and I am satisfied, but if the price is a little lower, I am Large satisfied View detail

It is a very good product.

I also use it for another Motorcycle, but this product is easy to install because the precision is good and the making is polite. After all I think that Radiator guard is necessary. View detail

It is inconspicuous, but it was expensive but satisfied!

At the time of touring in summer I realize that I guard foreign objects such as insects enter the Radiator!
When touring in the rain, realize that the Radiator guard guards entering the Small stone!
It was expensive but I was satisfied with Large. View detail

good!!

wow~!! good!! I recommend it!! The delivery was fast and the packaging was too good. It is cool when installed on CB1000R View detail

Required for Large thing Radiator core

Radiator core of CB1000R is Large type and FFender is short, so jumping up from Tire hits Moro Radiator core.
This Core guard has a sense of security since the Center part where the splashing hits well is a fine Mesh..
Since both SIDE are coarse meshes, there seems to be no disturbance of the cooling effect.
Although you can easily install it, those who are not confident as in the instruction manual are Shopetc. It would be nice to have it installed.
I think that it is an indispensable item for CB 1000 R. View detail

Eye detail than OEMGuard, Guard effect is good

Installation is at the lower Hook 4 places, from the Tapping screw on the upper side
Bolt nut tightening. Because 5 mm Bolt street is bad
File expanded somewhat Large.

Eye of the GuardCenter part finely effects Large.
Shape with Stainless Steel ? I am satisfied with the texture. View detail

10 minutes to install Radiator guard

Be careful not to cut your hands with Edge as a glove hand,
Since I remove Bolt and attach it only to be attached,
Nothing to pay particular attention to.
It seems that a stepping stone is also guarded without sound such as Chatter sound. View detail

Easy to install and chic Custom feel UP

Habit of the pattern is not too strong, I liked the color of the dark eyes so I chose it

The texture is a surface that is not as muddy as it is less glossy.
Although the edge of Punching is slightly rough, it is not the Level you care about.

Installation was possible without any problem if proceeding according to attached Instruction Manual.
I do not quite understand the degree of the effect, but it seems that Guard character is enough.
I am pleased to feel like Custom View detail