HONDA LEAD 100
- 28/07/2016
396 views
Model Name:LEAD 100
Manufacturer:HONDA
Model Year:1998
It had its carburetor changed when it underwent its full model change. It adopted a newly developed catalyzer to its exhaust, and made it conform to the Japanese emission regulation. It was the first bike to pass this restriction. LEAD 100 was made to generate 9.3 horsepower by raising its displacement volume.
Specifications:
[Basic spec]
Manufacturer | HONDA | Engine Type | Air-Cooled 2 Cycle Single Cylinder |
---|---|---|---|
Model Name | LEAD 100 | Starter | Combined Usage of Cell and Kick Starter |
Grade | – | Maximum Output (ps) | 9.3ps(6.8kw)/6750rpm |
Drive Train | – | Maximum Torque (kgf/m) | 1.0kg-m(9.8N-m)/6000rpm |
Model Type | JF06 | Curb Weight | 99 |
Displacement | 101 | Dry Weight | 92 |
Sales Launch Year | 1998/3 | Fuel Efficiency by Catalog | 43.1 km/L (at 60 km/h) |
Height/Width/Length | 1060/-/1795 | Fuel Tank Capacity | 7.5 |
Seat Height | – | Distance to Empty | – |
Front Tire Indication | 100/90-10 56J | Fuel Supply | Carburetor |
Rear Tire Indication | 100/90-10 56J |
[Service data]
Standard Plug | BR6HSA-9 | Chain Size | – |
---|---|---|---|
Number of Used Plugs | 1 | Chain Link Number | – |
Engine Oil Amount | – | Battery Code | FTX5L-BS |
Engine Oil (Refill) | – | Headlight | 12V 40w/40w |
Engine Oil (Element Replacement) | – | Headlight Type | PH11 |
Front Blinker Rating | 12V 10w/5w | Headlight Remarks | – |
Drive Sprocket Teeth Number | – | Tail Light Rating | 12V 18w/5w |
Driven Sprocket Teeth Number | – | Rear Blinker Rating | 12V 10w |
[Machine detail]
Motor Model Code | JF06E | Caster Angle | – |
---|---|---|---|
Bore (mm) | 51 | Trail (mm) | – |
Storke (mm) | 49.6 | Minimum Ground Clearance | – |
Compression Ratio | 6.5 | Distance Between Axes | – |
Ignition Method | CDI Type Battery Ignition | Streering Angle (Right) | – |
Engine Lubrication Type | Separate Lubrication Type | Turning Angle (Left) | – |
Frame Type | Underbone | Mirror Screw Hole Diameter | 8mm |
Minimum Rotaion Radius | 2 | Fuel Tank Reserve Capacity | – |
[Underbody detail]
Front Brake Type | Hydraulic Disc | Suspension Type (Rear) | Unit Swing |
---|---|---|---|
Front Brake Remarks | – | Number of Rear Shock Absorbers | – |
Rear Brake Type | Mechanical Leading Trailing | Rear Suspension Stroke | – |
Rear Brake Remarks | – | Rear Wheel Travel | – |
Suspension Type (Front) | Telescopic | ABS | – |
Front Fork Type | – | Drive Train | Belt Drive |
Front Suspension Stroke | – | Differential Oil Amount | – |
Front Fork Diameter | – | Chain Remarks | Belt Drive |
[Equipment]
Seat Lowering Allowance | – | Theft Prevention Device | Available |
---|---|---|---|
Mirror Screw Hole Diameter | 8mm | Tail Light Bulb Type | T20 |
Mirror Remarks | – | Tail Light Base Shape | Wedge (Large W) |
Electronic Device Remarks | – | Tail Light Base Shape 2 | – |
Fuel Gauge | Available | Tail Light Remarks | – |
Clock | – | Front Blinker Bulb Type | T20 |
Hazard | – | Front Blinker Base Shape | – |
[Engine detail]
Clutch Type | Dry Multiple Plate Shoe Type | Tappet Clearance (mm) EX | – |
---|---|---|---|
Transmission | Continuously Variable(V matic) | Idling Initial Value (rpm) | – |
Number of Gears | – | Needle Steps (Clip Location) | – |
Gear Ratio | – | Float Level (mm) | – |
Primary Reduction Ratio | – | Air Screw Return | – |
Secondary Reduction Ratio | – | Main Jet Type | – |
Variable Speed Vehicle Gear Ratio | 2.400 – 0.790 | Main Jet Number | #98 |
Tappet Clearance (mm) IN | – |
[Other spec]
Clutch Cable Length | – | Rear Brake Cable Length | – |
---|---|---|---|
Choke Cable Length | – | Other Cables | – |
Meter Cable Length | – | Engine Number (Production Launch) | – |
Throttle Cable Length | – | Engine Number (Production End) | – |
Front Brake Cable Length | – |
[See Moto Index of HONDA]
[See Accessories for HONDA LEAD 100]