SUZUKI DR250R
- 14/12/2016
182 views
Model Name:DR250R
Manufacturer:SUZUKI
Model Year:1995
It changed its engine to DOHC type. It was equipped Φ 28 oval carburetor with a acceleration pump and an oil cooler. It demonstrated 31PS, which was the top-class performance. There was also a low seat model whose seat was 40mm lower.
Specifications:
[Basic spec]
Manufacturer | SUZUKI | Engine Type | Oil-Cooled 4 Cycle Single Cylinder |
---|---|---|---|
Model Name | DR250R | Starter | Self Starter |
Grade | – | Maximum Output (ps) | 31ps(22.8kw)/8500rpm |
Drive Train | – | Maximum Torque (kgf/m) | 2.8kg-m(27.5N-m)/7000rpm |
Model Type | – | Curb Weight | 126 |
Displacement | 249 | Dry Weight | 111 |
Sales Launch Year | 1995/2 | Fuel Efficiency by Catalog | 47.0 km/L (at 60 km/h) |
Height/Width/Length | 1205/-/2230 | Fuel Tank Capacity | 10 |
Seat Height | – | Distance to Empty | – |
Front Tire Indication | 80/100-21 51P | Fuel Supply | Carburetor |
Rear Tire Indication | 4.60-18 63P |
[Service data]
Standard Plug | CR9E | Chain Size | 520 |
---|---|---|---|
Number of Used Plugs | 1 | Chain Link Number | 108 |
Engine Oil Amount | 1.6 | Battery Code | FTX5L-BS |
Engine Oil (Refill) | 1.1L | Headlight | 12V 35w/36.5w |
Engine Oil (Element Replacement) | 1.3L | Headlight Type | PH8 P15d-25-3-130 degrees |
Front Blinker Rating | 12V 15w | Headlight Remarks | – |
Drive Sprocket Teeth Number | 14 | Tail Light Rating | 12V 21w/5w(12V 5w) |
Driven Sprocket Teeth Number | 42 | Rear Blinker Rating | 12V 15w |
[Machine detail]
Motor Model Code | J425 | Caster Angle | 26.8 Degrees |
---|---|---|---|
Bore (mm) | 73 | Trail (mm) | 108 |
Storke (mm) | 59.6 | Minimum Ground Clearance | – |
Compression Ratio | 10.4 | Distance Between Axes | – |
Ignition Method | CDI Type | Streering Angle (Right) | 45 |
Engine Lubrication Type | Wet Sump | Turning Angle (Left) | 45 |
Frame Type | Semi Double Cradle | Mirror Screw Hole Diameter | 10mm |
Minimum Rotaion Radius | 2.3 | Fuel Tank Reserve Capacity | – |
[Underbody detail]
Front Brake Type | Hydraulic Disc | Suspension Type (Rear) | – |
---|---|---|---|
Front Brake Remarks | – | Number of Rear Shock Absorbers | – |
Rear Brake Type | Hydraulic Disc | Rear Suspension Stroke | – |
Rear Brake Remarks | – | Rear Wheel Travel | – |
Suspension Type (Front) | – | ABS | – |
Front Fork Type | – | Drive Train | – |
Front Suspension Stroke | – | Differential Oil Amount | – |
Front Fork Diameter | – | Chain Remarks | – |
[Equipment]
Seat Lowering Allowance | – | Theft Prevention Device | – |
---|---|---|---|
Mirror Screw Hole Diameter | 10mm | Tail Light Bulb Type | S25 / G18 |
Mirror Remarks | – | Tail Light Base Shape | BAY15D |
Electronic Device Remarks | – | Tail Light Base Shape 2 | – |
Fuel Gauge | – | Tail Light Remarks | – |
Clock | – | Front Blinker Bulb Type | G18 |
Hazard | – | Front Blinker Base Shape | – |
[Engine detail]
Clutch Type | Wet Multiple Plate Coil Spring | Tappet Clearance (mm) EX | – |
---|---|---|---|
Transmission | Permanently Engaged 6-Stage Normal Shift | Idling Initial Value (rpm) | – |
Number of Gears | 6 | Needle Steps (Clip Location) | – |
Gear Ratio | 2.416 / 1.733 / 1.333 / 1.111 / 0.952 / 0.826 | Float Level (mm) | – |
Primary Reduction Ratio | 3.19 | Air Screw Return | – |
Secondary Reduction Ratio | 3 | Main Jet Type | – |
Variable Speed Vehicle Gear Ratio | – | Main Jet Number | #115 |
Tappet Clearance (mm) IN | – |
[Other spec]
Clutch Cable Length | – | Rear Brake Cable Length | – |
---|---|---|---|
Choke Cable Length | – | Other Cables | – |
Meter Cable Length | – | Engine Number (Production Launch) | – |
Throttle Cable Length | – | Engine Number (Production End) | – |
Front Brake Cable Length | – |
[See Moto Index of SUZUKI]
[See Accessories for SUZUKI DR250R]