Reviews
More than I expected…
I bought it for winter touring because I had some points left over and there was a discount campaign going on.
I can do electrical work and have replaced grips before, so I installed it myself.
Installation was easier than I expected, but it is safer to ask a store to do it if you are worried about the force required to press-fit the grips.
The key heat is effective at Plus temperatures, but not so effective at Minus temperatures. Well, it is better than nothing.
I have a Honda 400X with Honda OEM hand guard, so it is not directly exposed to wind, but even so, the effect starts to diminish from about 3 degrees Celsius.
It is better than nothing, but when I experienced HondaOEM's Grip heater on the 400X I rented from LenBarrel at HondaDREAM before, it was so hot that I could not grip it even at high speed in the morning in the middle of winter, and 2 out of 3 levels was enough.
This product does not get that hot even at max. 5 levels.
It seems that the temperature differs depending on the Manufacturer, and KIJIMA-made products seem to be lower than those of other Manufacturers.
Power is supplied from Honda OEM power supply coupler ACC.
However, the grip is very good, so I will give it an overall rating of 3.
Good points:comfortable grip and easy to install.
Five levels allow for detailed settings depending on the situation.
The bad:Not as hot as expected.
View detail
Fits: HONDA Hornet-S, HONDA AX-1, HONDA CB650F, HONDA CBF600, HONDA CBF600 ABS, HONDA CBF600S, HONDA CBR250R, HONDA CBR250RRR, HONDA CBR600F, HONDA CBR650F, HONDA CBR900RR Fireblade, HONDA VFR750F, HONDA VFR800, HONDA XR250R, HONDA hornet
Excellent
i havE used NGK Plug CR9EH-9 7502 spark plugs they are the best for long run.i have used this spark plugs on my honda Hornet 250 1998 model they work very well no maintainance required.best performance.. View detail
Fits: HONDA CB1000R, HONDA CB1300S, HONDA CBR650F, HONDA CRF1000, HONDA CRF1100, HONDA CRF250RLAC, HONDA GROM125G, HONDA CBR250RR, HONDA CB400SF, HONDA CBR650R
Dress-up.
These are completely self-satisfied dress-up parts.
I'm happy with it myself, but it's expensive!
View detail
Good cosmetics, old standby.
[How is it used?
It has been a standard consumable for a long time. I use this Filter every time.
How was your experience with it?
The quality is stable and reliable. I am satisfied with the quality of the product and have had no problems with it.
[Points to note]
Even if you use Filter wrench, you may choose to use Wrench because it is a Type without corners. I have never had a problem because I stick the Driver in and remove it.
How did it compare to other products?
It is comparable to the OEM Product, and I don't think there are any problems. There is no visible difference in performance, but it is a good consumable item for periodic replacement due to its good cost performance.
View detail
UV sensitive, torn after one year.
The 2LSize is too small for the MT09. Also, it seems to be weak against ultraviolet rays, and the part that was exposed to the sun well deteriorated and tore after not lasting a year. View detail
Ignition System Refresh
Engine startability in winter was poor,
Standard Plug BP5HA to NGK Iridium Plug
Ignition coil for MC47 (Standard Tune in MC22)
Plug cord for the Uotani SP 2 (Plug cap uses OEM)
Startup is better and Idling is more stable.
The 6-speed 40 km/h is also easier to ride.
Torque did not experience any thickening.
View detail
On a 2011 CBR600RR.
I bought it because I didn't want to do thick Gloves in the winter.
The installation was done by Webike's Support store with direct shipping.
In the case of the CBR600RR, I gave up on it myself because it is Large strange to remove the FI side of the Accelerator Wire.
I have used it and it heats up so much that it is hot at the strongest Level.
My wish to use thin Gloves in winter was fulfilled as long as I warmed the back side of my hand from time to time.
There is no possibility of mishandling during Blinker operation.
View detail
Cost performance!
It is a normal oil filter, no oil leakage and comparable to OEM. Cost performance is good. View detail
Design is good, beautiful Blue.
I like the very beautiful Blue and the Design is cool. View detail
The high impact of the large original blinkers is removed
About quality and texture, I can confirm that the quality is great and that the material used is for the lenses is PMMA (polymethylmethacrylate) with a clear finish and the bulbs are glass with a plated finish. About the feeling of use, By removing the bright orange lenses and replacing them with the clear lenses, the high impact of the large original blinkers is removed while still having the same desired effect as the original blinkers when in operation but they now have a custom look. Products to buy together, While working on making the original blinkers look nicer I would take advantage of this to also add a clear tail light to your cart to also help tidy up the rear of the bike. Difficulty of installation, I can say the fitment of the lenses for my installation was very easy due to the simplistic design of how the lenses secure to the blinkers housing with a clip and a screw just as the original ones do. Cost performance and comparison with other products, The pricing of the product is great. You receive a full set of lenses and bulbs that are of great quality. The pricing of other clear lenses sets available are higher but if you like the smoked lenses then these can be purchased cheaper from Kitaco. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Good Brake Pads
Very good Control. Durable and reliable. View detail
The 2019 Monkey 125 have a rigid surface which leads to tight installation of the seat
About quality and texture, I can confirm that the quality is great and that the material used is moulded rubber. About the feeling of use, The seat setting rubbers of the 2019 Monkey 125 have a rigid surface which leads to tight installation of the seat as compared to the 2022 model that have a smooth surface which makes the installation easier. Products to buy together, Other rubber wear items like the gear change pedal rubber would be ideal to also add to your cart to freshen these parts up over time. Difficulty of installation, I can say the fitment of the seat setting rubbers for my installation was very easy due to the simple nature of pressing the tail of the setting rubber into the hole on the base of the seat. Cost performance and comparison with other products, The pricing of this product is great. You receive a seat setting rubber that is made from quality material and is only available from Honda. About shipping and packaging My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Fashion.
Good for those who prefer a thicker grip.
I thought the Grip feeling would be nice.
Look at it, look at it ^_^.
View detail
Customization that no one notices
It was installed to make operation a little easier in traffic jams on the commute to work.
The vehicle installed is HONDA400X.
I thought it was because it was imported because it was so expensive. I thought it was because it was imported, but I was convinced that the housing material was titanium alloy gold.
Needle bearings are press-fitted, but since there is no dust seal, there is concern about the entry of garbage and grease.
I think the needle bearing is the same as the NSK model number FWF-142012 in terms of size. (It is made overseas, so it may be slightly different from JIS standard.) If the movement gets worse, I will try to use a lubrication-free Bush instead of a B? Ring.
Installation is easy, but the original Bolt has a lock tie applied, so it is hard to loosen.
Be careful not to drop the removed Bolt on the FrontSprocket side. I dropped it and it was very strange to find it.
I didn't expect it to work, but it does, and the clutch feels very light.
Cons? is that absolutely no one notices (laughs).
View detail
Fits: HONDA VFR800, HONDA CB650R, HONDA CBR650R, HONDA CB650F, HONDA CB1100RS, HONDA CBR650F, HONDA CB1100EX, HONDA CB1000R, HONDA CB1100
BABYFACE Babyface Axle Protector
I usually enjoy my motorcycle life by riding around town and touring.
This Axle Slider is effective in the event of a mossy accident.
Therefore, we have rated it as ineffective.
This is the first Return in 11 years for the Large type.
This is the first Large type of NAKED.
So, I am riding slowly and leisurely in the spirit of the first time.
As you would expect from Babyface, other companies sell Axle Slider.
I thought it was a very different kind of design.
The only thing is that the Shaft is about 10mm shorter on the CB650R.
And Quantity:Pair (for Left and Right) I want 5mm each.
I would not recommend it to my friends for a moment.
Only about 70% of the Nut has been tightened.
We gave it 4 stars for quality and texture.
I think that's about it in terms of cosmetics.
View detail
A little short.
I selected it from the vehicle compatibility chart, but the Rear is covered well, but the Front is not covered enough. I can compromise because I use it in a covered parking lot, but it is hard to lock the chain lock. It was a little more.
The texture of the Cover is good. As mentioned above, it is roofed, so I don't think it will be water repellent or strong, but I think it will keep for a long time.
View detail
Very ordinary Oil Filter
It is very common, but there is a Merit that can remove foreign objects in the Engine because it contains Magnet.
I always choose with Magnet's Oil Filter because I think it is better to have it than not to have it.
View detail
Fits: HONDA CBR400R, HONDA CBR600RR, HONDA CBR650F, HONDA CBR650R, HONDA CB650R, HONDA CB250R, HONDA 400X, HONDA CB125R
It is only a little wider angle. However, it is safe for checking the following vehicles.
[How is it used?
Day and night use of public roads and highways
Was the installation difficult?
It is easy to apply with double-sided tape.
How was your experience with it?
I often did not notice cars driving in my blind spot. I thought it would be dangerous to change lanes, so I installed the system, and although the angle is a little wider, I feel a little safer.
Other items that would be helpful
It is easy to check for following cars through Mirror at night because the following car headlight is not glaring.
Also, there is a little gap on the Right Side, perhaps due to individual differences in OEM Mirror or this product, but I am satisfied with it because I am a person who does not care about details.
View detail
Fits: HONDA CBR650F, HONDA CRF250 R, HONDA VFR800X, HONDA CBR400R, HONDA CRF1000F Africa Twin, HONDA CBR650R, HONDA CBR1000RR, HONDA CB650R, HONDA CB650F, HONDA CB400SF, HONDA CB1300SB, HONDA CB125R, HONDA CB1100RS, HONDA CB1000R, HONDA 400X, HONDA CB1300SF, HONDA VFR800F, HONDA GROM-II, HONDA CRF250L, HONDA CB400SB
ODAX Keiti Fuel Cap Pad
연료통 입구에 흠집이 나는걸 방지해 주려고 샀습니다.
푹신푹신한 재질이라 더 좋은거 같아요
스티커만 붙이면 되는거라 설치하기 간편합니다.
I bought it to prevent scratches at the entrance of the fuel tank.
I think it's better because it's a soft material
It's easy to install because you just need to put on a sticker.
----------------------------------------------------------
I bought it to prevent scratches at the entrance of the fuel tank.
I think it's better because it's soft and fluffy
You only need to attach a sticker, so it's easy to install.
I boughHt it to prevent scratches at the enterance of the fuel tank.
I Think It'S BECAUSE IT A SOFT MATERIAL
It's Easy to Install Because You Just need to put on a Sticker.
Powered by Google Translator
View detail
Fits: HONDA VFR800, HONDA VFR800X Cross Runner, HONDA Rebel 250, HONDA Rebel 500, HONDA CBR400R, HONDA CBR650F, HONDA CRF1000L Africa Twin, HONDA CRF250 RALLY, HONDA 400X, HONDA CB1100, HONDA CB1100 EX, HONDA CB1100 RS, HONDA CB650F, HONDA CBR1000RR, HONDA NM4, HONDA GROM, HONDA CBR250RR(2017-), HONDA CBR500R, HONDA CB500X, HONDA Rebel300
Recommendation for those who care about the appearance.
I applied it on my CB400SB, and it is an excellent shape, and I was able to apply it beautifully without any difficulty, just keeping in mind to apply it carefully and slowly. I think the adhesive power of this capPad is weaker in winter than in summer. View detail