Reviews
Easier.
The GSX1300R HAYABUSA Throttle was as heavy as rumored. I thought it would be a little heavy and large enough to be durable, but my hands are getting tight, especially when riding around town while also holding the brake. The price is cheap and I think it is a good product. I also bought Throttle's Spring to replace it by myself, but I'm using this one in due time. View detail
Fits: KAWASAKI estrea, KAWASAKI 250TR, KAWASAKI W400, KAWASAKI W650, HONDA Shadow 400, HONDA GB250, HONDA FTR223, KAWASAKI Estrella RS, KAWASAKI Vulcan 400, KAWASAKI Vulcan 400 Classic, SUZUKI Intruder 400 Classic, SUZUKI glass tracker, SUZUKI Glass Tracker Big Boy, YAMAHA SR400/500, YAMAHA TW200/E, YAMAHA TW225/E, YAMAHA Dragster 1100, YAMAHA Dragster 1100 Classic, YAMAHA Dragster 250, YAMAHA Dragster 400
It was defective.
After installation, the Fuse jumped when I checked the operation. I checked and found that the Bolt of the Blinker's Wiring Fix had contacted the Earth of the Horn and was shorted. I did not expect high quality because of the low price, but if you are going to sell them under the GarageT&F brand, you should at least check the operation of all of them before shipping, etc. I was disappointed when I installed it after processing and repairing it. View detail
Xvs1100 seat ,excwllent
Quick ish delivery, very good seat made well and fits perfect makes my bike look even better . Came well package and sealed with instruction, I will be ordering foe more in the future View detail
Good when changing tires
My first purchase from your site... Shipping was good and very fast, I used EMS... Well packed and everything arrived fine!!! Original products in original packaging in the best quality!!! Thank You Webike!!! View detail
Fits: YAMAHA WR250X, YAMAHA DragStar Classic, YAMAHA DragStar, YAMAHA YZF600 THUNDER CAT, YAMAHA XJ600N, YAMAHA TDM900 A, YAMAHA TDM900, YAMAHA YZF1000 THUNDER ACE, YAMAHA FZS1000 FAZER, YAMAHA DragStar1100 Classic, YAMAHA DragStar1100, YAMAHA BT1100BT1100 BULLDOG, YAMAHA V-MAX, YAMAHA XJR1300, YAMAHA FJR1300, YAMAHA XV1700Roadster warier, YAMAHA YZF-R6, YAMAHA YZF-R1
For OEM full compatibility, Serie-OROSeries is recommended!
[How is it used?
I installed it on the Front of MainMotorcycle's XJR1300C.
The brake hose is Goodridge mesh,
Brake Pads are now Race baseOEMPad for YZF-R1.
I was actually planning to introduce the SUPER SPORTS750Series (product number:208.9737.18),
SUPER SPORTS750Series has a 300mm outer diameter, while the XJR OEMdisc has a 298mm outer diameter, which is 2mm larger.
Therefore, if the disc is installed as is, the outer circumference of the disc cannot be used, and the pad must be modified slightly to interfere with the floater.
I was hesitant to purchase the Serie-OROSeries because of this, but when the OEM fully compatible Serie-OROSeries came out, I did not hesitate to purchase it.
Was the one you received as per Image?
The product arrived exactly as shown in the picture.
The inner bell is CNC machined and has a very beautiful finish.
Logo of brembo and others are also well included, and it is a One pointAccent, which is also nice.
FloatingSpec. is CrimpType and is designed for use on public roads.
The Inner and Outer do not move pusher-pusher as in Full floating and semiFloating, though,
On public roads, CrimpType is recommended for longer Life.
The most recommended point is that the outer part (the sliding surface that contacts the pad) is exactly the same as that used for the SUPER SPORTS750Series.
Therefore, it is likely that the specifications can withstand the use of Race.
Was the installation difficult?
The installation itself is very easy, and if you can remove the front wheel, I don't think you will have any problems.
How was your experience with it?
In fact, it would have been better to use a new pad and break it in, but the pad had just been changed, so we used it as it was.
I drove slowly until I finished attaching the bite, but it works well.
Size and thickness are the same as OEM, so there is nothing drastically different,
I can recommend it because it looks better and it is cheaper to install brembo than buying OEM disc.
[Included Parts:were they on?
There was nothing in particular
[Was there anything that disappointed you?
No. I also compared it with SUNSTAR's Custom type,
If you have a Large person, it will look a little like a Mischief disc, so if you want to create a calm atmosphere, you can use a Large person's
We highly recommend installing brembo's Serie-OROSeries.
View detail
Fits: HARLEY-DAVIDSON FXDX DYNA SUPER GLIDE T-SportsSuper Glide T-Sport FXDXT, HARLEY-DAVIDSON XL1200C SPORTSTER 1200SUPER Low SuperLow XLT, HARLEY-DAVIDSON XL883SUPER Low SuperLow XLL, HARLEY-DAVIDSON XL1200C SPORTSTER 1200Seventy-TwoSportster Seventy-Two XLV, HARLEY-DAVIDSON XL1200C SPORTSTER 1200 Forty-EightSportster Forty-Eight XLX, HARLEY-DAVIDSON XL1200C SPORTSTER 1200 Forty-EightSPECIAL KnifeSportster Forty-Eight Special XLXS, HARLEY-DAVIDSON FLSTC HERITAGE SOFTAIL CLASSICFLSTF FATBOY Lo Fat Boy Lo FLSTFB, HARLEY-DAVIDSON FLSTC HERITAGE SOFTAIL CLASSIC BreakOutBreakout FXSB, SUZUKI BOULEVARDC50, HARLEY-DAVIDSON Electra GlideElectra Glide FLH, HARLEY-DAVIDSON FLHTCUElectra Glide Ultra Classic FLHTCU, HARLEY-DAVIDSON FLHTCElectra Glide Classic FLHTC, HARLEY-DAVIDSON Electra GlideStandardElectra Glide Standard FLHT, HARLEY-DAVIDSON Electra GlideSportsElectra Glide Sport FLHS, HARLEY-DAVIDSON FXDX DYNA SUPER GLIDESuper Glide FXD, HARLEY-DAVIDSON FXDX DYNA SUPER GLIDECustomSuper Glide Custom FXDC, HARLEY-DAVIDSON FXDX DYNA SUPER GLIDESportsSuper Glide Sport FXDX, HARLEY-DAVIDSON FLHXStreet Glide FLHX, HARLEY-DAVIDSON XL1200C SPORTSTER 1200IronIron XLNS, HARLEY-DAVIDSON XL1200C SPORTSTER 1200Custom Custom XLC
Buns Grip
It is easy to grip and Grip works well. View detail
GRASS TRACKER BIGBOY
BIC BOY's main jet was quite old, so I changed it.
I'm a novice, so I'm going to do my best, even though setting and large is a little bit strange.
View detail
Fits: YAMAHA WR250X, YAMAHA DragStar Classic, YAMAHA DragStar, YAMAHA YZF600 THUNDER CAT, YAMAHA XJ600N, YAMAHA TDM900 A, YAMAHA TDM900, YAMAHA YZF1000 THUNDER ACE, YAMAHA FZS1000 FAZER, YAMAHA DragStar1100 Classic, YAMAHA DragStar1100, YAMAHA BT1100BT1100 BULLDOG, YAMAHA V-MAX, YAMAHA XJR1300, YAMAHA FJR1300, YAMAHA XV1700Roadster warier, YAMAHA YZF-R6, YAMAHA YZF-R1
Fully OEM compatible and cool!
It will be fully OEMdisc and compatible.
The TDM900 is OEM and the Inner Disk is BlackPainting, but the Serie-OROdisc also has a Black Inner Color, so a quick glance is NORMAL itself.
I also like the fact that it doesn't look like a DISC exchange.
However, the OEM is punched out of an aluminum plate by PRESS, so the edge of the punched hole is rough, while the Serie-OROSeries is CNCCut-out (probably), so the edge is sharp.
therefore 'Poof, it looks like an OEMdisc, but for some reason it looks upscale...' The atmosphere is mysterious.
The OEM compatibility is not only in the installation and appearance, but also in the structure of the Floating itself.
The floater is crimped from the back and is fixed with a strong wave washer, so the disc does not move in a pushing-pushing motion like a full floating disc like the racing discs made by brembo. The disc does not move in a pushing motion like RACINGdiscs made by brembo that use full floating.
It is unfortunate that there is no sound characteristic of full floating on push/pull, but this drastically reduces the wear on the pins.
As a result, they are as durable as OEMdiscs, which cannot be compared to RACINGdiscs, and will not be replaced after 10,000km on public roads.
(Full floating RACINGdisc rattles after about 3000km on public roads)
It is inexpensive even though it is made by brembo, and there are no complaints as a replacement for the reduced OEMdiscs!
It is not as flashy as a certain domestic disc, but if you don't like the flashy "I replaced it" look, this should be the best choice for you! If you don't like the flashy "I replaced it with a new one!
View detail
Genuine Yamaha O-Ring for FZ1 2006
This FZ1 2006 has an issue with the water pump. There was a noticeable leak happening and eventually found the culprit. It was the oil seal inside that failed. I found the correct part number by checking Yamaha schematics for this model and year. Not particularly hard and I got the right one. The price Webike had this oil seal for was really great and better than my local Yamaha dealer could do. With some other parts in my order, all were shipped together using EMS. The order arrived in 5 days from shipping which is usual for EMS, they just get your order delivered. The parts were well packaged and no damage was sustained during transit. The oil seal itself was in a Yamaha packet. It is a well pressed oil seal with no visible debris or extra rubber which would cause problems where it needs to go. It is pretty rigid but had some flex to it which came in handy whilst seating it correctly. Now all done, the water pump works as it shopuld and there are now no leaks at all. The coolant is a healthy temp and all is good. Thank you Webike, very pleased with purchase. View detail
I wish I could have replaced it by now, it was time to replace it, OEMdisc replacement w
I was originally going to purchase brembo Super Sport, but then I saw that they sold one that could be attached to the car.
Brake Fee Ring looks not so different. But if you look closely, you can see the Logo, so I think it is a little custom.
It is a little more expensive than OEM, but I think it is good because you still have the satisfaction of having bremboBrake Discs installed.
View detail
good quality, perfect fit
I bought this clutch cable along with throttle and choke cables. This cable is 100 mm/10 cm longer than stock but I had no problems about them. The fitment is great. Maybe in the future, I may install an ape hanger to my bike and I can use that extra 10 cms. View detail
good quality, perfect fit
Bought these for dragstar 1100 classic. The cables look to be of good quality and fit my bike perfectly. Don't forget to lube the cables before installing them on the bike. View detail
Tightly made
At first I thought it was defective because it was too tight, but when I pushed it in slowly and carefully, paying attention to the angle of the frame, it went in like a hammer. It may be a bit expensive, but every time I replace the Slip-on Silencer, I replace this one as well. View detail
Genuine Yamaha Gaskets for MT07 2020
I wanted to get a few of these for future projects and it just so happened that one of these was also needed for the rebuild job on the MT07 2020 that had an accident and needed sorting out. This gasket was for the water pump to keep it from leaking. Not really a hard part to find as this one like a lot of other gaskets from Yamaha do fit a host of other models. This is why it is good to get more than one when I order from Webike. The part was easy to find using the tools Webike provide in their help sections and then if you like to cross reference, do this via Yamaha schematics. Simple. With a lot of other nuts, bolts, washers and gaskets needed to complete this rebuild, I had a lot of the parts shipped together to save me on shipping cost. When you add a few other parts, it really does work out cheaper in the long run. Also, EMS saves me time by shipping in a efficient manner and gettting my order to me fast. In 5 days from shipping, my order arrived. All my parts were in great shape, no damage caused in transit at all. I am not surprised really as Webike warehouse do a cracking job at packing the orders well. I got 5 of these washers and each came in a Yamaha packet. The gaskets are I think, copper but may be a composite but defintiely have copper in them. These are perfect as copper is a soft metal and will crush down to hold a tight seal. Exactly what you want for a water pump. Very pleased with the purchase and the gaskets are super nicely machined. Great work Webike, thank you. View detail
No problem for OEM exhaust pipe installation Size
[How is it used?
Replaced during installation on an XJR400R Slip-on Silencer.
I chose this KITACO product because it is a consumable and the OEM price was too high.
How was your experience with it?
The Size on the Exhaust pipe side is Exactly, which is fine for conformity.
However, the WR's Slip-on Silencer that I replaced did not require a joint gasket, so I ended up keeping the size only as a result.
Well, if I ever change the Exhaust System, I will have a chance to use it, so I will let it sleep in the warehouse.
How did it compare to other products?
Less expensive compared to OEMs.
I don't think there are any problems with the Size and quality aspects.
[Points to note]
Check in advance whether your Silencer requires it!
【Review】
The price is lower than OEM and there are no quality issues.
It is a consumable item and should be replaced periodically, but some Silencers are unnecessary, so check if you need to use them before purchase.
View detail
Fits: YAMAHA SR400, YAMAHA BT1100 BULLDOG, YAMAHA BT1100 BULLDOG, YAMAHA BT1100 BULLDOG, YAMAHA BT1100 BULLDOG, YAMAHA BT1100 BULLDOG, YAMAHA BT1100 BULLDOG, YAMAHA BT1100 BULLDOG, YAMAHA DRAGSTAR, YAMAHA DRAGSTAR, YAMAHA DRAGSTAR, YAMAHA DRAGSTAR, YAMAHA DRAGSTAR, YAMAHA DRAGSTAR, YAMAHA DRAGSTAR, YAMAHA DRAGSTAR, YAMAHA DRAGSTAR, YAMAHA DRAGSTAR, YAMAHA DRAGSTAR, YAMAHA DRAGSTAR
Sunstar brake disc
quality is great with cnc floating Center part Braking feels good and secure Cost effective with the standard of the product compared to OEM Shipping is quick View detail
Fits: YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900 Stratos Liner, YAMAHA XV1900 Stratos Liner, YAMAHA XV1900 Stratos Liner
Favorite ^ ^ ^
It was very good
It was installed in less than 30 minutes with no modifications.
View detail
Fits: YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA FZ6R, YAMAHA FZ6R
Genuine Yamaha O-Ring for FZR6R 2016
This O-Ring also needed replacing for the fork rebuild on teh FZR6R. The part was super easy to find witht the help of the tools available on Webike. The price was brilliant and even though it's only an o ring, would you really want to risk a pathetic aftermarket one which will bring your riding to a halt... no. So, this was also ordered along with a few other parts and the shipping was very good indeed. I used EMS fast service as they do exactly what they say they will, deliver FAST, the end. Arrived with me within a week of ordering all the parts needed. All packaged really well as expected and any space in the box was filled with bubble wrap and air pockets to protect any smaller and more delicate parts from damage. I now it is just an ring but this is an important one that you should be careful with. When I opened the packet, the o ring was perfect, no tears rips, loose pieces of rubber or anything. Yamaha really do know how to make o rings. It was a nice smooth surface and was flexible but not too much as this could also cause issues. Yes, I have made the mistake of buying cheap alternatives before to my detrement, just ended in disaster and had to get an OEM one anway, just do not waste your money on the cheap crap. Stick to getnuine for these things. Fitted easily and I hope the rest goes together with such ease. Very pleased with my purchase and from now on, I will ONLY buy genuine OEM for my baby. Great service Webike, thank you very much. View detail
Fits: HONDA Forza300, HONDA CB500X, HONDA CBR500R, KTM RC390, KTM RC125, KTM RC250, KTM 690DUKE R, KTM 390DUKE, KTM 690DUKE, KTM 250DUKE, KTM 200DUKE, KTM 1290 SUPER DUKE R, KTM 125DUKE, KTM 1190 RC8, TRIUMPH Thruxton, TRIUMPH TIGER SPORT, TRIUMPH STREET TRIPLE R, TRIUMPH StreetTwin, TRIUMPH STREET TRIPLE 85, HONDA SHADOW SLASHER
Pretty good
Purchased to make effective use of the GIVI box, I installed it on the UniversalBase plate of Mono-lock and used it!
It can hold even small Rear Sets like Z250 very well.
I am also satisfied with the hold of the attached Belt.
View detail
Fits: YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900 Stratos Liner, YAMAHA XV1900 Stratos Liner, YAMAHA XV1900 Stratos Liner
Y's Gear^ ^ for peace of mind
Other people say they had to modify it, but it was easy to install with no modification at all. Adhesive is included in the package and it took about 20 minutes.
It looks better. w
View detail