![icon-webike.png](https://gc-img.webike.net/@wid-shop/assets/desktop/img/icon-webike.png)
Reviews
![Aluminum Drain Bolt (with Neodymium Magnet)](https://img.webike-cdn.net/catalogue/images/43783/02-09-0006_1_TS.jpg)
Fits: HONDA SUPER CUB 50PRO, HONDA SUPER CUB 50, HONDA SUPER CUB110PRO, HONDA SUPER CUB110, HONDA Giorno, HONDA Today, HONDA PCX160, HONDA PCX150, HONDA PCX, HONDA Dunk, HONDA Dio110, HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA LEAD125, HONDA ADV150, HONDA ADV160
Fits well with 2018 Crosscub.
I purchased this because the thread of the original drain bolt was blunt.
Although it is not visible, it looks cleaner and more durable than a genuine drain bolt.
The O-ring has now traveled 20,000 km and is still in good condition.
Because of the magnet, it filters out fine iron powder well and is easy to wipe off even without loosening it with a flat screwdriver. -------------------------------------------------- -------- I purchased this because the thread of the original drain bolt was blunt. Although it is not visible, it looks cleaner and more durable than a genuine drain bolt. The O-ring has now traveled 20,000 km and is still in good condition. Because of the magnet, it filters out fine iron powder well and is easy to wipe off even without loosening it with a flat screwdriver. Powered by Google Translator
View detail
![Decompression Cable](https://img.webike-cdn.net/catalogue/images/69374/ECH30303_TS.jpg)
Purchased for replacement
Previously, the SR500 up handlebar was used and the decompression cable was +10cm longer than the original product. There were no problems with installation or use, but since the length is long and there are bends, I was concerned about stress on the cable, so I purchased this product. It is installed well without any excess length. -------------------------------------------------- -------- Previously, the SR500 up handlebar was used and the decompression cable was +10cm longer than the original product. There were no problems with installation or use, but since the length is long and there are bends, I was concerned about stress on the cable, so I purchased this product. It is installed well without any excess length. Powered by Google Translator View detail
![Assist Carrier](https://img.webike-cdn.net/catalogue/images/94930/HQ-08001_TS.gif)
Fits: HUSQVARNA SVARTPILEN 401, HUSQVARNA VITPILEN 401, HUSQVARNA SVARTPILEN 200, HUSQVARNA SVARTPILEN 125, HUSQVARNA SVARTPILEN 250
The best choice for waterproof bag storage
It was useful during long distance tours.
Since the rear seat of the Svartpilen is short and narrow, this carrier can stably hold a waterproof bag of about 40 liters.
The design is simple, so it doesn't look too distracting.
Both 1st and 2nd generation fillens can be used. -------------------------------------------------- -------- It was useful during long distance tours. Since the rear seat of the Svartpilen is short and narrow, this carrier can stably hold a waterproof bag of about 40 liters. The design is simple, so it doesn't look too distracting. Both 1st and 2nd generation fillens can be used. Powered by Google Translator
View detail
![Front Rack](https://img.webike-cdn.net/catalogue/images/60043/crosscub_1_TS.jpg)
It goes well with the 2018 Crosscub.
There are about 3 to 4 front carriers for crosscurves on sale, and I like them because they are just the right size and not too big.
Anything that is too heavy will affect the steering, so it is better to load a sleeping bag or light camping gear and it is convenient to tie it down.
-------------------------------------------------- -------- There are about 3 to 4 front carriers for crosscurves on sale, and I like them because they are just the right size and not too big. Anything that is too heavy will affect the steering, so it is better to load a sleeping bag or light camping gear and it is convenient to tie it down. Powered by Google Translator
View detail
![DB-001 Straight Cut Jeans](https://img.webike-cdn.net/catalogue/images/118884/37012_TS.jpg)
3 season pants
Daytona's winter fleece pants were worn very well. Now that the days are getting warmer, I was looking for pants for all three seasons and bought them because I liked the casual design and not-so-slim fit. Thin knee pads are included, and although it is unfortunate that the length is particularly long, I am satisfied. -------------------------------------------------- -------- Daytona's winter fleece pants were worn very well. Now that the days are getting warmer, I was looking for three-season pants and bought them because I liked the casual design and not-so-slim fit. Thin knee pads are included, and although it is unfortunate that the length is particularly long, I am satisfied. Powered by Google Translator View detail
![Full Mesh Protector Gloves DG-002](https://img.webike-cdn.net/catalogue/images/116328/32261_TS.jpg)
It's cool
I wore the winter version of the same model very well. While looking at mesh gloves for summer, I chose them because I liked the design, which was not too sporty and was reasonably casual. It is excellent value for money, and because it is made of mesh, it is breathable and light. -------------------------------------------------- -------- I wore the winter version of the same model very well. While looking at mesh gloves for summer, I chose them because I liked the design, which was not too sporty and was reasonably casual. It's great value for money, and because it's made of mesh, it's well ventilated and light. Powered by Google Translator View detail
![Road Comet](https://img.webike-cdn.net/catalogue/webike_images/0000/0000/0189/23838583_1_TS.jpg)
Chic Design Road Comet Fairing
The Road Comet fairing was perfect in every way, it was easy to fit and looks awesome. The 2 tone paint was absolutely spot on. Communication with WeBike was also very good. View detail
![Suspension Hook](https://img.webike-cdn.net/catalogue/images/53553/31254_TS.jpg)
Genuine G-Craft Suspension Hools (stand bobbins) for Honda Monkey 125
Whilst I was ordering the clutch cover for the Monkey 125, the customer asked to order a set of these stand bobbins too so it would be easier to work on the bike. Not a problem and super easy to find. The cost is ridiculously low and for what you get for your money a cool. Witht he other parts in my order, I got them all shipped together to save some funds and were all delivered in 5 days. The stand bobbins came in the shrink wrapped packet and were well presented. These do come in 2 parts so are pretty straight forward to fit together, then it is just a case of bolting to the bike. The quality of these look awesome and do look like they will last a fair while. I did have my doubts with the small bolts but they do seem to hold up well. No issues there. Very pleased with how they fit sand how easy they are to install. Thanks Webike View detail
![Full Exhaust System Gasket (1 Set of 2pcs.)](https://img.webike-cdn.net/catalogue/10032/x2_TS.jpg)
Genuine Kitaco Exhaust Gaskets for SUPER CUB 50
These gaskets were purchase due to needing an exhaust change on the Super Cub 50 and I do not like reusing the old ones if at all possible. These Kitaco ones were reviewed well and so I decided to give these a try myself. The price for the gaskets was excellent and far better than buying the OEM ones which essentially do the same job anyway. I have used a few Kitaco parts before and they really are great quality. I did have some other parts in an order and everything arrived in 5 days from being shipped. The gaskets arrived in the Kiataco packaging and were spot on. No issues or problems and the specs were perfect too. Very pleased with this purchase. View detail
![Hose 5 5VY-12588-00](https://img.webike-cdn.net/catalogue/images/91187/5VY-12588-00_TS.jpg)
Genuine Yamaha Hose 5 for FZ1 2008
This was yet another part that is for the rebuild of the FZ1 2008 which was looking a bit tired with the almost 20 year old OEM parts. Although they were not particularly damaged, they made the bike look older than it is so new ones are essential. Finding the right hose was easy as I already had the Yamaha schematics for the previous pipes and hoses needed. The cost from Webike was great and far better than I could source locally. With the other parts I need for this rebuild in the same order, I saved a little on the shipping too which also helped. Via EMS my order was delivered in 5 days from shipping and was very well packaged and padded out so no damage was incurred. The hose 5 is a smaller diameter hose than the previous hose 1 I also purchased but it is also an inner braided hose as it needs to be robust and strong. The original bend fits perfectly with the pipes and along witht he clips I also purchased, the rebuild is cvoming along nicely. Thanks Webike, great job guys. View detail
![Iridium Plug CR9EIA-9 6289](https://img.webike-cdn.net/catalogue/images/22617/1956215_1_TS.jpg)
kawasaki z650 plug
I am very happy to receive fast delivery of a plug that performs well. The price is also satisfactory. I am very satisfied with the fact that I trust the company's prompt processing and the price is reasonable.
The quality of the parts and bike protective clothing I had previously purchased was very good.
I plan to continue to pay attention and purchase good products.
I am happy that it is delivered quickly and without any significant shipping costs. -------------------------------------------------- -------- I am very happy to receive fast delivery of a plug that performs well. The price is also satisfactory. I am very satisfied with the fact that I trust the company's prompt processing and the price is reasonable. The quality of the parts and bike protective clothing I had previously purchased was very good. I plan to continue to pay attention and purchase good products. I am happy that it is delivered quickly and without any significant shipping costs. Powered by Google Translator
View detail
![Custom seat](https://img.webike-cdn.net/catalogue/images/89973/th0025947-1_TS.jpg)
A really well crafted seat like no other currently available
About quality and texture - The custom seat from Petex is made using fiberglass for the seat structure and a synthetic tuck and roll material for the seat cover, the quality from the overall fit and finish is perfect. About the feeling of use - A really well crafted seat like no other currently available but the comfort is still lost when compared to the original Honda seat. The look of the seat is impressive and easily adds to the cafe look on the Monkey 125, especially with the rear end being moulded around the tail light. Products to buy together - If you are looking to enhance the cafe look, a product you may want to consider to purchase along side the custom seat is the belly pan available from Petex, that fills the open space below the engine perfectly. Difficulty of installation - The installation of the custom seat is a simple task that took 0.3 of an hour to complete. Some slight mechanical aptitude and the use of basic hand tools is all that is required to secure the custom seat to the frame. Cost performance and comparison with other products -I find the cost of all the products Petex sell to be higher then what most other companies sell their products for and the custom seat is no different, but this is due to the original design, quality materials and the high quality finish of their products. About shipping and packaging - With there being a significant cost difference between sea freight and EMS for the custom seat, I chose sea freight to put the saved money toward other parts. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
![Pipe Engine Guard](https://img.webike-cdn.net/catalogue/images/101090/25138_TS.jpg)
very good product
There are various engine guard products for the Rebel 1100, but this product is the most compact and seems to cause less damage to the car body when used.
The price is reasonable too
Installation seemed simple, but it was not easy to do alone.
Still, the paint condition and finish of the product are really good.
This is a very satisfactory product. -------------------------------------------------- -------- There are various engine guard products for the Rebel 1100, but this product is the most compact and seems to cause less damage to the car body when used. The price is reasonable too Installation seemed simple, but it was not easy to do alone. Still, the paint condition and finish of the product are really good. This is a very satisfactory product. Powered by Google Translator
View detail
![Speed Style Gloves Rufio](https://img.webike-cdn.net/catalogue/images/102415/4046_07_TS.jpg)
It feels so nice to wear
It feels so nice to wear I want to buy a few more I love the fit of the design. I would highly recommend it for offroad bikes. ^^ View detail
![Reinforced 6 Clutch Disc Kit](https://img.webike-cdn.net/catalogue/images/87920/307-1432500_image_4_TS.jpg)
Best kit if you are looking to improve the clutch appearance and durability
About quality and texture - The reinforced 6 clutch disc kit from Kitaco is made from aluminium, steel and fibres with a lovely machined surface finish on the outer rim, the quality from the overall fit and finish is perfect. About the feeling of use - The reinforced 6 clutch disc kit would have to be the best kit if you are looking to improve the clutch appearance and durability over the original setup. Would have also been nice if all six posts had been drilled and tapped to accept the corresponding aftermarket clutch lifter plates. Products to buy together - A key product to purchase when upgrading the clutch system is a set of heavier clutch springs. There are varying degrees of aftermarket clutch springs available, just depends what suits you. Difficulty of installation - The installation of the reinforced 6 clutch disc kiti is an intermediate task that took 1.0 hour to complete. Some mechanical aptitude and the use of special tooling and basic hand tools is what is required to access the engine internals and assemble the clutch kit to secure onto the main shaft of the tramsmission. Cost performance and comparison with other products - I find the cost of all the products Kitaco sell to great value when compared to what most other companies sell their products for and the reinforced 6 clutch disc kit is no different. About shipping and packaging - With there being no significant cost difference between sea freight and EMS for the reinforced 6 clutch disc kit, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
![Magnetic Drain Bolt](https://img.webike-cdn.net/catalogue/images/1817/ze58-1_TS.jpg)
ZETA Good Value
ZETA provides good quality at a good price and this oil drain plug has excellent anodising that is better than some more expensive brands. The most important thing is the magnet on this ZETA plug is very strong, so it will do a good job at catching debris etc. Apply a little grease before install... View detail
![Rear Suspension](https://img.webike-cdn.net/catalogue/10364/HD206_TS.jpg)
This rear suspension offers multiple spring options so everyone is covered
About quality and texture - The rear suspension from Ohlins is made from micined billet aluminium featuring a silver anodized surface finishe, the quality from the overall fit and finish is perfect. About the feeling of use - This rear suspension offers multiple spring options so everyone is covered for your weight and riding style. Obviously way better then the original units with there heavier rated springs and preload adjusting collars and the looks when fitted to the yellow Monkey 125 with it's matching gold front forks is the best. Products to buy together - The suspension on the Monkey 125 would have to be the worst part of this mini moto, so after the purchasing of this high quality rear suspension the essential product to purchase to complete your suspension upgrade would be the Ohlins front fork insert kit but sadly Webike Japan do not have this product available but you can purchase it from Webike Thailand. Difficulty of installation - The installation of the rear suspension is a simple task that took 0.5 of an hour to complete. Mechanical aptitude and the use of basic hand tools is what is required to secure the rear suspension between the frame and the swingarm. Cost performance and comparison with other products - I find the cost of all the products Ohlins sell to be higher then what most other companies sell their products for and the rear suspension is no different, but this is due to the high quality materials used and the consistent high quality finish of their products. About shipping and packaging - With there being no option for sea freight or EMS for the rear suspension, I had to chose FEDEX which is priced higher then I like to usually spend on shipping. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
![[Repair Parts] Piston Ring Set](https://img.webike-cdn.net/catalogue/images/131008/01-15-020_01_TS.jpg)
SP Takegawa make it too easy to maintain their engine kits
About quality and texture - The piston ring set from SP Takegawa is made from steel with a heat treated surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - SP Takegawa make it too easy to maintain their engine kits. The piston ring set contains what you need to freshen up this area of the engine without having to repurchase the whole engine kit previously installed. Products to buy together - A key product to purchase when freshening up the top end of the engine is a new gasket set as it is far from advised to reassemble this area with used gaskets. Difficulty of installation - The installation of the piston ring set is an advanced task that took 2 hours to complete. Mechanical aptitude and the use of assorted hand tools is what is required to disassemble this part of the engine, correctly fit to the piston and then button the engine back up. Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the piston ring set is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the piston ring set, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
![Full Exhaust CROSS TWIN BLACK](https://img.webike-cdn.net/catalogue/images/126410/25679289_1_TS.jpg)
MORIWAKI Complete exhaust CROSS TWIN BLACK
Finally after a year of questions and doubts I purchased the MIORAKI muffler which for me is a marvel, a beautiful product with a deep sound compared to the original and above all aesthetics, what can I say I really like it, I recommend the manufacturer and the seller to all serious people who know what to do their work is very good. THANK YOU SO MUCH MIORAKI THANK YOU SO MUCH WEBIKE JAPAN ------------------------------------------- --------------- Finally after a year of questions and doubts I purchased the MIORAKI muffler which for me is a marvel, a beautiful product with a deep sound compared to the original and above all aesthetics , what can I say I really like it, I recommend the manufacturer and the seller to all serious people who know what to do their work is very good. THANK YOU SO MUCH MIORAKI THANK YOU SO MUCH WEBIKE JAPAN Powered by Google Translator View detail
![Bullet BlinkerB](https://img.webike-cdn.net/catalogue/images/127056/C15Z9990226ST_TS.jpg)
Fits: HONDA APE, HONDA BENLY50, HONDA DAX, HONDA MONKEY, HONDA CT110 HUNTER CUB, HONDA GB250 CLUBMAN, HONDA FTR223, HONDA CL400, HONDA FTR220, YAMAHA SRV250, YAMAHA RENAISSA, YAMAHA BRONCO, YAMAHA TW225, YAMAHA TW200, YAMAHA SR400, YAMAHA SR500, SUZUKI VANVAN, SUZUKI GN125, SUZUKI GS125, SUZUKI VOLTY
Not very good
The paint on some of these has a bumpy texture, like the units weren't clean when the paint was applied. One of them had an electrical short upon installation which was popping my signal fuse. Luckily I had bought a spare. Installaton wasn't a big problem, but I wish they used thicker gauge of wire, it's very thin. Very inexpensive blinkers, but you get what you pay for. I wish I had spent a little more and gotten better quality blinkers. View detail