Reviews
This hook is one article recommended to touring Rider. It is recommended at Rider who does long touring especially in camping. In the long touring of camping, loads surely increase in number. A large rear seat is already a substitute at a carr
This hook is one article recommended to touring Rider.
It is recommended at Rider who does long touring especially in camping.
In the long touring of camping, loads surely increase in number.
A large rear seat is already a substitute at a carrier.
It is load useful-load steep up.
It is very user-friendly.
Since the location in the case of loading a load comes before a rear wheel center, weight balances in front and behind hardly collapse, either, and, in high speed operation, a front wheel does not blur.
Since the design of the whole motorcycle is not broken down in design, it is GOOD.
A price is also cheap a single figure compared with carrier purchase.
There is no hand which does not attach this.
It is a privilege of only skywave650 that the loading hook is set up.
(There is no loading hook in other makers' mega scooter) you, skywave650 users of touring use, -- let's equip with this hook by all means.
View detail
Fits: HONDA Lead 50, HONDA GIORNO CREA, HONDA GIORNO CREA, HONDA DIO(4Cycle), HONDA TODAY, HONDA TOPIC, HONDA TOPIC, HONDA TOPIC
The HONDA today (AF61) is equipped. WR is 5.5x6. Since the place in which I live had many slopes, preparations exchange was carried out at acceleration serious consideration. After exchange rises and it reaches it that it is good and a slope d
The HONDA today (AF61) is equipped.
WR is 5.5x6.
Since the place in which I live had many slopes, preparations exchange was carried out at acceleration serious consideration.
After exchange rises and it reaches it that it is good and a slope does not have difficulty, either.
Although it seemed that the slide piece was attached and there was a problem in durability by word of mouth, mine has not broken [ whether it has been improved and ].
If it equips, a certain grade can strengthen acceleration and the maximum high speed, but since it is 50 cc fundamentally, a limit is visited.
If it equips also with a price according to its style since the thing of TAKEGAWA is cheaper, I will think that it is good.
View detail
Although it had equipped with the trucker rod silencer muffler made from the wiruswin before, Although only side stands could be used but it was good as it is, since this (two flat knots) taste muffler was the attachment which carries out center stand
Although it had equipped with the trucker rod silencer muffler made from the wiruswin before,
Although only side stands could be used but it was good as it is, since this (two flat knots) taste muffler was the attachment which carries out center stand wearing, future maintenance became easy.
Although it was a high sound lighter [ beginning to attach sound volume ], it changed from the 1000~2000-K grade to low-pitched sound a little! Incidentally I have removed the attached baffle.
you! since a price is also cheap at the product made from a stainless -- a trial -- being valuable .
View detail
Since sound had turned into explosive sound roaring when general-purpose S size titanium silencer was stuck to the stainless carbon full exhaust made from OVER for Vmax (taking out one), it purchased in order to stop it. By 60.5 phi, it was stopped wi
Since sound had turned into explosive sound roaring when general-purpose S size titanium silencer was stuck to the stainless carbon full exhaust made from OVER for Vmax (taking out one), it purchased in order to stop it.
By 60.5 phi, it was stopped with the sufficient degree, and Power whose punch was effective could feel and escaping too much is dramatically satisfied with high rotation of the diameter of inner punching.
In my case, sound was suppressed considerably.
Although silencers are still exchanged at the time of an automobile inspection (smile)
View detail
Fits: YAMAHA YZF-R7, YAMAHA YZF-R6 S, YAMAHA YZF-R1 SP, YAMAHA YZF-R1, YAMAHA XJR 1300, YAMAHA YZF 1000R, YAMAHA XJR 1300, YAMAHA XJR 1200, YAMAHA MT-09, YAMAHA MT-07, YAMAHA FZS 1000, YAMAHA FJR 1300, YAMAHA BT 1100, YAMAHA FJR 1300, SUZUKI Hayabusa, SUZUKI GSX-R 750, SUZUKI GSX-R 600, SUZUKI GSX-R 1000 R, SUZUKI GSX-R 1000, SUZUKI GSX-R 1000
The wonderfulness which can be changed into phi19x18 and phi19x20 by one slotted screwdriver was lost in the piston diameter, though it was expensive, it purchased, but it was the engine performance same in a price. Seemingly although the present sett
The wonderfulness which can be changed into phi19x18 and phi19x20 by one slotted screwdriver was lost in the piston diameter, though it was expensive, it purchased, but it was the engine performance same in a price.
Seemingly although the present setting is used by phi19x20 in accordance with F Sas's setting, the hit which reacts to a delicate brake touch at a linear is a brembo very much.
If the suspension setting suitable for phi19x18 is found from now on and it is made to be used properly, it is [ or ] good ...
Since it obtains by stationary type +alpha at those who want to use 18 and 20, is it recommended?
View detail
Although it is used in combination with the radial master of a brembo, since it interfered in the cowl and a handle did not go out when it was an angle of stay as it is, it is bent and used. Then, it being very pleasing is being able to bend finely.
Although it is used in combination with the radial master of a brembo, since it interfered in the cowl and a handle did not go out when it was an angle of stay as it is, it is bent and used.
Then, it being very pleasing is being able to bend finely.
It was able to bend with nature to the extent that it did not give bending.
The degree of freedom of the neighborhood about there is important for products in general! Too!
View detail
It changes into a grip heater from a sponge grip, and purchases for appearance Kougami of the circumference of a handle. Appearance became very good. However, since an axel stops returning if it does not take care about past [ of a screw / a bundl
It changes into a grip heater from a sponge grip, and purchases for appearance Kougami of the circumference of a handle.
Appearance became very good.
However, since an axel stops returning if it does not take care about past [ of a screw / a bundle ] at the time of attachment, cautions are required.
View detail
Fits: HONDA PS250, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR1100, HONDA FORZA(MF06), HONDA SILVER WING400, HONDA SILVER WING600, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR1100 RS, KAWASAKI BALIUS, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750 RS, YAMAHA MAJESTY250(4HC), YAMAHA MAXAM, YAMAHA GRAND MAJESTY400, YAMAHA GRAND MAJESTY250, SUZUKI GSX250FX, KAWASAKI BALIUS2, YAMAHA MAJESTY250 SV, YAMAHA MAJESTY250(SG03J)
The zephyr chi is equipped. He wanted change from normal and it purchased. It wavered [ How many colors are used? ], and although blue and purple were also worried, the black same after all as a body color was chosen. Since it is comfortable b
The zephyr chi is equipped.
He wanted change from normal and it purchased.
It wavered [ How many colors are used? ], and although blue and purple were also worried, the black same after all as a body color was chosen.
Since it is comfortable by having used the same color, I think that it was good.
Mind that the posture at the time of operation changed specially is not carried out.
First of all, normal could be carried out, and since it did not necessarily use, it was not thought that it became easy.
Attachment was easy, and since it did not need to exchange a brake hose for the thing of long, it was completed freely.
Since he wants change and it equips the circumference of a handle for the time being, so so satisfaction is carried out.
View detail
Fits: Others , SUZUKI GSX400, YAMAHA XJR400, HONDA CB400SF
Cling to djebel 250SE-1. As for one's own car, as for the eye from first thing in the morning, somehow, the engine's starting is bad and a battery weakens in the meantime. When Wright could be killed, a few attached with good kana. Although wi
Cling to djebel 250SE-1.
As for one's own car, as for the eye from first thing in the morning, somehow, the engine's starting is bad and a battery weakens in the meantime.
When Wright could be killed, a few attached with good kana.
Although wiring is easy, the cords to a switch are the part four stars which did not arrive to near the grip short.
View detail
Uninfluential [ at all ] in clutch brake operation, moreover, since the guard engine performance is high, it is excellent parts!
Uninfluential [ at all ] in clutch brake operation, moreover, since the guard engine performance is high, it is excellent parts! View detail
Fits: KAWASAKI NINJA2 Helmet50RR, KAWASAKI NINJA250R
If the position was raised at any rate, it thought in order that it may be easier to make it as high as possible, and made it this product. Although a position becomes high 18 mm, if a handle is actually grabbed more than a size, it will be felt as th
If the position was raised at any rate, it thought in order that it may be easier to make it as high as possible, and made it this product.
Although a position becomes high 18 mm, if a handle is actually grabbed more than a size, it will be felt as the posture rose.
Ninja250R is the atmosphere near a naked just like CB.
It became quite [ in posture ] easy after attachment.
When running a long distance on touring, it is good touch, and the inside of a town, etc. are easy.
in a road over a mountain pass, a handle is merely high -- it is felt as 縲?
I think that it is an article good for the direction considered for inclined attitudes to be hard for the time being since it can remove by the scene which runs well since attachment is easy.
View detail
It purchases as insurance so that it may stand and may end owing to the minimum damage at the time of GOKE. Since there was no manufacturer stock, it took brief time. -- It is although I think that attaching this product goes into an easy category. --
It purchases as insurance so that it may stand and may end owing to the minimum damage at the time of GOKE.
Since there was no manufacturer stock, it took brief time. -- It is although I think that attaching this product goes into an easy category. -- It is useless if there is no anyway orderly tool (14 mm of glasses wrench deep socket RAJIETTO extension).
If it works with a spanner (thing with low accuracy), the head of a screw may be licked and it may become although it flies, there is nothing.
The screw of the main part engine mount of a motorcycle.
Dramatically.
If a deep socket with a glasses wrench or high accuracy is not used since it has kept with strong torque, the head of a screw will lick thoroughly. -- It is dramatically troublesome if it becomes so. -- To the kit corresponding to a model for CB1300SF and 08~09 years Radiator hose.
The engine mount components processed so that it might not interfere are attached.
This was dramatically good.
I think that it can attach satisfactorily if it is Ho with the orderly tool.
It is recommended.
View detail
Since there was only the zephyr chi in a catalogue, I would like to carry out impression here, although the object for the zephyrs 400 was before purchased from webike. Although appearance and reinforcement of comment were wonderful, since he had a st
Since there was only the zephyr chi in a catalogue, I would like to carry out impression here, although the object for the zephyrs 400 was before purchased from webike.
Although appearance and reinforcement of comment were wonderful, since he had a strange feeling with the angle to see, * was set to four.
View detail
Fits: SUZUKI GSX-8S, KAWASAKI Ninja ZX-10R, KAWASAKI Z900, SUZUKI GIXXER SF250, SUZUKI GIXXER SF250, SUZUKI GSR750, SUZUKI V-Strom1000 XT ABS, SUZUKI V-Strom1000 ABS, SUZUKI V-Strom1000, SUZUKI V-Strom250, SUZUKI KATANA, SUZUKI SV650X, SUZUKI SV650, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-S750, SUZUKI GSX-R125, SUZUKI GSX-R125 ABS, SUZUKI GSX-S125
It attached to GSX-1300R peregrine falcon. First, it was charmed by an established reputation called a yoshimura and the design, and decided. Although I chose silver, since it seemed that it rubs inevitably and surface paint application came off w
It attached to GSX-1300R peregrine falcon.
First, it was charmed by an established reputation called a yoshimura and the design, and decided.
Although I chose silver, since it seemed that it rubs inevitably and surface paint application came off when the friend had attached other colors and hung maintenance stands, silver was used.
Attachment is also easy and, as for appearance, a simple and casualness are expressed.
When maintenance stands are used frequently, the worn inconspicuous silver is a recommend! Since it is introducing by my HP in detail, please have a look.
wind of shirobusa http://www.k4.dion.ne.jp/~nori-99/J-TRIP.html
View detail
Fits: SUZUKI GSX-8S, KAWASAKI Ninja ZX-10R, KAWASAKI Z900, SUZUKI GIXXER SF250, SUZUKI GIXXER SF250, SUZUKI GSR750, SUZUKI V-Strom1000 XT ABS, SUZUKI V-Strom1000 ABS, SUZUKI V-Strom1000, SUZUKI V-Strom250, SUZUKI KATANA, SUZUKI SV650X, SUZUKI SV650, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-S750, SUZUKI GSX-R125, SUZUKI GSX-R125 ABS, SUZUKI GSX-S125
The address V125 was equipped. It was used for the aluminum billet plate which is the silencer stay of the steiner muffler made from p's supply as a decoration color. They are the product here and the product presented by the friend. . .
The address V125 was equipped.
It was used for the aluminum billet plate which is the silencer stay of the steiner muffler made from p's supply as a decoration color.
They are the product here and the product presented by the friend.
.
.
Although the original purpose of use was different wearing, the improvement in appearance was conspicuous!! An attached image becomes the contents.
.
.
Incidentally.
.
.
The bearing surface diameter of an upper base of the product here is phi26mm.
Height is 25 mm.
Rather than the existing bolt, the bottom length of a bolt head which formed 15-mm long becomes a suitable size.
We equipped using the product cap bolt made from a stainless, and M8x55!! Postscript.
Blue alumite of the product here.
.
.
in practice, the color of a medium blue tone -- it is clever.
(It is very beautiful it is blue in a color like [ it is thinner than blue, and a light blue is also deep, and ] the clear blue sky !!) According to a device, I am parts with which it can equip at any cost, and consider [ that it can be used also as decoration parts also as functional parts, and ].
If it is a part of cap bolt use of M8 size, it is a showplace of your sense!!
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R Hayabusa
It attached to the peregrine falcon of 09. The right is a pure screen. There is height and there is the windscreen effect from a pure screen.
It attached to the peregrine falcon of 09.
The right is a pure screen.
There is height and there is the windscreen effect from a pure screen.
View detail
Fits: SUZUKI GSX1300R Hayabusa
Although it is back-ordered and the screen which he ordered has not arrived yet, blog friends are delivery-of-goods return, and it had the thing ordered in reserve yielded. A price is also cheap compared with the screen of the same bubble type, struct
Although it is back-ordered and the screen which he ordered has not arrived yet, blog friends are delivery-of-goods return, and it had the thing ordered in reserve yielded.
A price is also cheap compared with the screen of the same bubble type, structure is also solid, and there was also almost no gap of the hole at the time of attachment.
The character of hayabusa of a black portion also serves as a one point, and is good touch.
Very much [ although the high speed was run instantly / the windscreen effect in the common region ].
To put it bluntly, the scene which turns down that the number of the stars * is three although appearance is good, and is seen over a screen is distorted, and is in sight.
The things with reasonably priced only this much were things.
View detail
笆?Appearance and form The convex quantity of an end increases by about 30 mm from normal. When it sees from the direction which sat down, it is not round arch shape but 笆?texture near a square shape. The field of view seen over the screen is good.
笆?Appearance and form The convex quantity of an end increases by about 30 mm from normal.
When it sees from the direction which sat down, it is not round arch shape but 笆?texture near a square shape. The field of view seen over the screen is good.
笆?protection-against-wind nature which has slight distortion of a field of view like the surge of board thickness from normal It is dramatically good! if normal -- about 140~150 km/h -- from -- if it is tight if a helmet does not turn down since it begins to riot right and left, but this shield is attached, even if it will not turn down at least 180 km/h of upper part of the body -- Iker.
Since the speed has ridden if you notice, to the extent that cautions are required.
not changing the accelerator opening, just as it turned down so that aerodynamics nature might become good further when it lay down -- a speed -- a rapidly top -- it goes.
The high speed cruise became markedly easy.
笆?Although the arch shape general comment screen one was liking, when there is an effect like this, a degree of satisfaction is dramatically high.
It was good to buy it.
Since it seems that the variation in board thickness is larger than normal, it is *-1.
View detail
Since license was acquired and it has been one year soon, it purchases to tandems. Attachment was very easy, and since it was only a bolt and a washer, it was OK by the in-vehicle tool. By good touch, appearance is also pleasing. However, remo
Since license was acquired and it has been one year soon, it purchases to tandems.
Attachment was very easy, and since it was only a bolt and a washer, it was OK by the in-vehicle tool.
By good touch, appearance is also pleasing.
However, removal of a tail cowl has become difficult by having attached the tandem bar.
It is O except it.
View detail
Since attachment requires adjustment, it is necessary to prepare an electric drill or a leutor. Although it can do if a cutter is also patient. If attached, a degree of satisfaction is high.
Since attachment requires adjustment, it is necessary to prepare an electric drill or a leutor.
Although it can do if a cutter is also patient.
If attached, a degree of satisfaction is high.
View detail