Saya membeli 2 buah tapi yg satu kurang bagus sealnya tidak bulat entah di pengiriman atau kurang di check View detail

Barang sesuai pesanan hanya saja segel terbuka terima kasih View detail

The piston ring set contains what you need to freshen up this area

About quality and texture - The piston ring set from SP Takegawa is made from steel with a heat treated surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - SP Takegawa make it too easy to maintain their engine kits. The piston ring set contains what you need to freshen up this area of the engine without having to repurchase the whole engine kit previously installed. Products to buy together - A key product to purchase when freshening up the top end of the engine is a new gasket set as it is far from advised to reassemble this area with used gaskets. Difficulty of installation - The installation of the piston ring set is an advanced task that took 2 hours to complete. Mechanical aptitude and the use of assorted hand tools is what is required to disassemble this part of the engine, correctly fit to the piston and then button the engine back up. Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the piston ring set is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the piston ring set, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail

Genuine Suzuki Oil Pan Gasket for GSX-R1000

This bike had a service not so long ago but the mechanic failed to seat the oil pan gasket correctly and in turn, this started leaking along the left side. Obviously, this is not a good situation so a new oil pan gasket was needed in a hurry. Finding the right gasket was not hard for this GSX-R1000 as there are a lot of these bikes around and need OEM parts for servicing etc. I checked Suzuki schematics and found the right one no problem. Webike already had this is stock so I would not have to wait for them to get it. The price was really good and better than my local Suzuki dealership could match. With a couple of other gaskets for this bike, I had them all shipped toghether and by EMS as they just get the delivery to me fast. It took like 5 days from being shipped for this to arrive with me. The gaskets were all nocely kept flat so not to distort them. They all came in the standard Suzuki packaging too. This gasket covers a large area but there is a lot of cut outs for obvious reasons. Every single one aligned perfectly and without any problems. I made sure the oil pan was torqued correctly and seated as it should be. Now there are no leaks and this bike should be good until the next oil change or service. Thanks Webike, very pleased with this purchase. View detail

Polisport Radiator Shroud Set for CR125R 2001

This was a set of radiator shrouds that needed replacing for wome new ones as the old ones had a lot of damage from rocks etc. I decided on the Polisport ones as I have used them a few times before and have had good experience with this brand. The radiator shrouds were pretty good value and are cheaper than some of the other alternatives out there. With a few other parts in my order, all were shipped together to save some costs. My order was delivered by EMS and took 5 days to arrive. The shrouds arrived in the Polisport packaging and were surrounded in buibble wrap to keepo them from sustaining damage in transit. The shrouds are made from a strong plastic material and are pretty robust and strong. There is a bit of flexibility so you can sit them fairly easily. I would recommend this brand for off road bike body work as they are cheap enough and last a while. The quality is really good and I found no flaws at all. Very pleased after fitting and the bike looks a lot more appealing now. Thanks Webike. View detail

Good looking stickers

Looks great, thick and durable, bonds good.Doesnt get scratched easily.highly recommend this. Easyl install,Cleaned surface of forks where these were to be applied and visually aligned the print applying the center as I held both ends back with one hand. Once the center made contact and I was satisfied the alignment was good I began pressing from the center up and down the full length of the decal to assure no bubbles were being trapped until one half was fully attached. Then worked from center again the other direction until it was fully wrapped around fork.Repeat on other side. View detail

Daytona spool nut

I'm very satisfied with my order,its my first time to order daytona accessories and it fits well on my Monkey125.the item is well packed and secure.very accomodating seller..item arrived fast..surely i will order again very soon..thank you webike and godbless you more View detail

Good product

Fits kawasaki w800 Improved the sponginess feeling Arrived well without any problem with customs Good service Highly recommended View detail

Looks good. Fit nicely.

Compared to the old hose, this is much more flexible. Fitment is good, don't think there will be any issue. I can recommend this hose for replacement need. View detail

Daytona spool nut

Fits perfectly! View detail

It's best

Because it is small in size, it seems difficult to lift luggage.
The quality is good and the overall balance seems good.
It creates a pretty look and looks better than when it was original.
It cannot be installed on the Ape 100 seat and fits perfectly on the Ape 50 seat.
Thank you for the fast delivery. -------------------------------------------------- -------- Because it is small in size, it seems difficult to lift luggage. The quality is good and the overall balance seems good. It creates a pretty look and looks better than when it was original. It cannot be installed on the Ape 100 seat and fits perfectly on the Ape 50 seat. Thank you for the fast delivery. Powered by Google Translator View detail

Fast delivery and good quality packaging

The product arrived 4 days after ordering. Thank you for the fast delivery. The quality of the product is good compared to the price. Webike's credibility is increasing. The set consists of the necessary tools and has a stall.
Searching is easy by organizing product categories by bike model. ---------------------------------------------------------- The product arrived 4 days after ordering. Thank you for the fast delivery. The quality of the product is good compared to the price. Trust in webike increases. It consists of tools that require a set configuration and has a stall. Searching is easy by organizing product categories by bike model. Powered by Google Translator View detail

Fits well with 2018 Crosscub.

I purchased this because the thread of the original drain bolt was blunt.
Although it is not visible, it looks cleaner and more durable than a genuine drain bolt.
The O-ring has now traveled 20,000 km and is still in good condition.
Because of the magnet, it filters out fine iron powder well and is easy to wipe off even without loosening it with a flat screwdriver. -------------------------------------------------- -------- I purchased this because the thread of the original drain bolt was blunt. Although it is not visible, it looks cleaner and more durable than a genuine drain bolt. The O-ring has now traveled 20,000 km and is still in good condition. Because of the magnet, it filters out fine iron powder well and is easy to wipe off even without loosening it with a flat screwdriver. Powered by Google Translator View detail

Purchased for replacement

Previously, the SR500 up handlebar was used and the decompression cable was +10cm longer than the original product. There were no problems with installation or use, but since the length is long and there are bends, I was concerned about stress on the cable, so I purchased this product. It is installed well without any excess length. -------------------------------------------------- -------- Previously, the SR500 up handlebar was used and the decompression cable was +10cm longer than the original product. There were no problems with installation or use, but since the length is long and there are bends, I was concerned about stress on the cable, so I purchased this product. It is installed well without any excess length. Powered by Google Translator View detail

The best choice for waterproof bag storage

It was useful during long distance tours.
Since the rear seat of the Svartpilen is short and narrow, this carrier can stably hold a waterproof bag of about 40 liters.
The design is simple, so it doesn't look too distracting.
Both 1st and 2nd generation fillens can be used. -------------------------------------------------- -------- It was useful during long distance tours. Since the rear seat of the Svartpilen is short and narrow, this carrier can stably hold a waterproof bag of about 40 liters. The design is simple, so it doesn't look too distracting. Both 1st and 2nd generation fillens can be used. Powered by Google Translator View detail

It goes well with the 2018 Crosscub.

There are about 3 to 4 front carriers for crosscurves on sale, and I like them because they are just the right size and not too big.
Anything that is too heavy will affect the steering, so it is better to load a sleeping bag or light camping gear and it is convenient to tie it down.
-------------------------------------------------- -------- There are about 3 to 4 front carriers for crosscurves on sale, and I like them because they are just the right size and not too big. Anything that is too heavy will affect the steering, so it is better to load a sleeping bag or light camping gear and it is convenient to tie it down. Powered by Google Translator View detail

3 season pants

Daytona's winter fleece pants were worn very well. Now that the days are getting warmer, I was looking for pants for all three seasons and bought them because I liked the casual design and not-so-slim fit. Thin knee pads are included, and although it is unfortunate that the length is particularly long, I am satisfied. -------------------------------------------------- -------- Daytona's winter fleece pants were worn very well. Now that the days are getting warmer, I was looking for three-season pants and bought them because I liked the casual design and not-so-slim fit. Thin knee pads are included, and although it is unfortunate that the length is particularly long, I am satisfied. Powered by Google Translator View detail

It's cool

I wore the winter version of the same model very well. While looking at mesh gloves for summer, I chose them because I liked the design, which was not too sporty and was reasonably casual. It is excellent value for money, and because it is made of mesh, it is breathable and light. -------------------------------------------------- -------- I wore the winter version of the same model very well. While looking at mesh gloves for summer, I chose them because I liked the design, which was not too sporty and was reasonably casual. It's great value for money, and because it's made of mesh, it's well ventilated and light. Powered by Google Translator View detail

Chic Design Road Comet Fairing

The Road Comet fairing was perfect in every way, it was easy to fit and looks awesome. The 2 tone paint was absolutely spot on. Communication with WeBike was also very good. View detail

A really well crafted seat like no other currently available

About quality and texture - The custom seat from Petex is made using fiberglass for the seat structure and a synthetic tuck and roll material for the seat cover, the quality from the overall fit and finish is perfect. About the feeling of use - A really well crafted seat like no other currently available but the comfort is still lost when compared to the original Honda seat. The look of the seat is impressive and easily adds to the cafe look on the Monkey 125, especially with the rear end being moulded around the tail light. Products to buy together - If you are looking to enhance the cafe look, a product you may want to consider to purchase along side the custom seat is the belly pan available from Petex, that fills the open space below the engine perfectly. Difficulty of installation - The installation of the custom seat is a simple task that took 0.3 of an hour to complete. Some slight mechanical aptitude and the use of basic hand tools is all that is required to secure the custom seat to the frame. Cost performance and comparison with other products -I find the cost of all the products Petex sell to be higher then what most other companies sell their products for and the custom seat is no different, but this is due to the original design, quality materials and the high quality finish of their products. About shipping and packaging - With there being a significant cost difference between sea freight and EMS for the custom seat, I chose sea freight to put the saved money toward other parts. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail