HONDA VT250 SPADA
- 04/07/2016
358 views
Model Name:VT250 SPADA
Manufacturer:HONDA
Model Year:1988
It refined the water-cooled 90 degrees V twin engine which derived from the VT250F. The engine was combined with its aluminum casting hollowed full cast frame (CASTEC). It was the first bike to adopt that frame then.
Specifications:
[Basic spec]
Manufacturer | HONDA | Engine Type | Water-Cooled 4 Stroke DOHC 4-Valve V-Shaped 2 Cylinder |
---|---|---|---|
Model Name | VT250 SPADA | Starter | – |
Grade | – | Maximum Output (ps) | 40ps(29kw)/12000rpm |
Drive Train | – | Maximum Torque (kgf/m) | 2.6kg-m(25.5N-m)/9000rpm |
Model Type | MC20 | Curb Weight | 153 |
Displacement | 249 | Dry Weight | 151(Approximate Value) |
Sales Launch Year | 1988/0 | Fuel Efficiency by Catalog | – |
Height/Width/Length | 1020/-/2010 | Fuel Tank Capacity | – |
Seat Height | – | Distance to Empty | – |
Front Tire Indication | 100/80-17 52S TL | Fuel Supply | Carburetor |
Rear Tire Indication | 140/70-17 66S TL |
[Service data]
Standard Plug | CR8EH-9 | Chain Size | 428 |
---|---|---|---|
Number of Used Plugs | 2 | Chain Link Number | 132 |
Engine Oil Amount | – | Battery Code | FTX7L-BS |
Engine Oil (Refill) | 1.8L | Headlight | 12V 60w/55w |
Engine Oil (Element Replacement) | 2.0L | Headlight Type | H4 |
Front Blinker Rating | 12V 15w | Headlight Remarks | – |
Drive Sprocket Teeth Number | 17 | Tail Light Rating | 12V 23w/8w |
Driven Sprocket Teeth Number | 54 | Rear Blinker Rating | 12V 15w |
[Machine detail]
Motor Model Code | MC15E | Caster Angle | – |
---|---|---|---|
Bore (mm) | – | Trail (mm) | – |
Storke (mm) | – | Minimum Ground Clearance | – |
Compression Ratio | – | Distance Between Axes | – |
Ignition Method | – | Streering Angle (Right) | – |
Engine Lubrication Type | – | Turning Angle (Left) | – |
Frame Type | – | Mirror Screw Hole Diameter | 8mm |
Minimum Rotaion Radius | – | Fuel Tank Reserve Capacity | – |
[Underbody detail]
Front Brake Type | Single Disc | Suspension Type (Rear) | – |
---|---|---|---|
Front Brake Remarks | – | Number of Rear Shock Absorbers | – |
Rear Brake Type | Disc | Rear Suspension Stroke | – |
Rear Brake Remarks | – | Rear Wheel Travel | – |
Suspension Type (Front) | – | ABS | – |
Front Fork Type | – | Drive Train | Chain |
Front Suspension Stroke | – | Differential Oil Amount | – |
Front Fork Diameter | – | Chain Remarks | – |
[Equipment]
Seat Lowering Allowance | – | Theft Prevention Device | – |
---|---|---|---|
Mirror Screw Hole Diameter | 8mm | Tail Light Bulb Type | S25 |
Mirror Remarks | – | Tail Light Base Shape | BAY15D |
Electronic Device Remarks | – | Tail Light Base Shape 2 | – |
Fuel Gauge | – | Tail Light Remarks | Glass Shape G18 Also Installable |
Clock | – | Front Blinker Bulb Type | T13 |
Hazard | – | Front Blinker Base Shape | Wedge (Medium)/Wedge (Medium) |
[Engine detail]
Clutch Type | – | Tappet Clearance (mm) EX | – |
---|---|---|---|
Transmission | – | Idling Initial Value (rpm) | – |
Number of Gears | – | Needle Steps (Clip Location) | – |
Gear Ratio | – | Float Level (mm) | – |
Primary Reduction Ratio | – | Air Screw Return | – |
Secondary Reduction Ratio | 3.176 | Main Jet Type | KEIHIN Round Large (E) |
Variable Speed Vehicle Gear Ratio | – | Main Jet Number | #108 |
Tappet Clearance (mm) IN | – |
[Other spec]
Clutch Cable Length | – | Rear Brake Cable Length | – |
---|---|---|---|
Choke Cable Length | – | Other Cables | – |
Meter Cable Length | – | Engine Number (Production Launch) | – |
Throttle Cable Length | – | Engine Number (Production End) | – |
Front Brake Cable Length | – |
[See Moto Index of HONDA]
[See Accessories for HONDA VT250 SPADA]