Kembali ke atas

I made this Filter the same as last time in the third Oil exchange.
Filter wrench is not required, there is no new expense, even in terms of performance
Since I could use it without problems, I would like to repeat it in the future.

Order these grips for a Honda CBR1000f as per the listing but they are to short,I should have measured the old grips instead of trusting the listing so please check before you order.Nice grip otherwise.

HELLO I'M SATISFIED OF THIS PRODUCT. SO I NOTICED AROUND 5000 RPM ,THE ENGINE SEEMS LIKE TO HAVE BLOWS. AS IS AN RACING PLUG YOU HAVE TO MAINTAIN A CERTAIN POWER FOR AVOIDING BLOWS.UP 5000 RPM YOU HAVE GOOD SENSATIONS.

I thought that it could be cheap at with Magnet, purchased, nothing was Paint on the exterior It was good at Simple
Since the tightening Torque is stated in the OEM, I watched it and installed it, but the next time I need to look it up
MT07 was 15 Nm

I bought it with Mirror exchange of the 2017 year Grom, but ...
I installed Style fun and cool.
The installation of the car body was installed snugly.
It is only the ground that you can adjust the angle of Mirror.
The angular width is small to turn it upwards, and I do not add it at all.
For two days I worried about various good ideas but abandoned it.
It will not be a shame.

1 quantity is 1 piece of mirror. Not 2 piece. Please beware. Item sold as described. Nice color but still preferred black.

NORMALLever did not have any problem, but since it seems to be reputable, I bought it with Clutch side and Set. Brake side is satisfied except the cheapness of Knob of Gold, but Clutch side is not good because it can not adjust any more.

Please update the number of mirror sold for each order. Example: 1pc or 2pcs mirror/s. This may confuse people into thinking that this item is sold in pairs.

very bad quality... the product seem like a china second hand mirror ... i will not install it on my bike...cant accept it

Oil Filter is exchanged periodically, but performance is not problem at all.
Also, as long as it functions as a filter, Manufacturer thinks it is unnecessary to keep in mind.

2017 MT-09 Racer used with GIVISpecial rack SR 212 1 and Set.
Although it took time to understand the relationship between this case and Base, there was no problem as long as it was installed.
(For initial top case installation)
It seems possible to install another Size, but I chose it because it seems that the fit is more beautiful.

Good branded and perfect mirror for my bike.Image are clear when bike go at high speed.I have ordered 2 more for my spare.I like the orange striking colour that makes my bike to be seen by other at night time.

When we arrived, it was already floating from release paper.
It seemed that the adhesive strength was not 0 and the season was still hot, so I tried adhering to Tank in the meantime and then it will float after a while.
As another means, by holding down from above for a long time, I hope that the shape of Pad itself will become familiar with Tank, I will keep curing Tape from above and keep it familiar 2 months.
I thought that it would have become familiar with it and seemed to be sticking somewhat when removing the curing tape.
But. It floated on the next day.
If you leave it like this, you will scratch the painting of Tank if you get in dust, so you only have to peel off.
It is mere Large loss.

Feeling of use
As expected, it is sweeter than Bolt stoppage to Carrier, so if it is a box with a horizontal width, it will become more severe for the unbalance of luggage etc.
However, it is fixed more firmly than expected, and there is little wobble.
I am wearing a box named B 47 of GIVI, but I think that the box width up to about 30 L is about 40 cm, so I feel that the feeling of use does not change from the one fixed to the carrier.

About mounting
As this product is once taken BALI, I think that Seat will not be scratched immediately, but if it fixes, the Gold genus part will be strongly pressed against Seat, so long term use and heavy luggage etc If you post it probably Seat will be torn.
Also, since the width of the item is narrow, Belt for fixing also goes to Cowl
To be strongly pressed, Belt's rubbing measures are also necessary.

For the wounds of Seat I will fold the micro fiber toowel for washing for Vehicle for the time being.
We have not taken countermeasures concerning Belt's rubbing, but we plan to paste a scratch prevention Seat on the Cowl side.


【What made you decide the purchase?】
Another color of the same product (Gold) Although I was using the observation, apparently Mushi was Gold - I noticed that it attacked suicide bombs with Yellow color. From spring to summer, since insects are hit and there is no choice, I bought another Color. (It is already late fall, so it will be active from next spring.)

【How was it actually used?】
I attached it to Nisshin Rapong. I also tried using Posh but Design was not good. SSK thinks Design is beautiful.

【Was it difficult to install? (Hard parts case)】
There is no problem including precision. I think that accuracy and finish are good for SSK products in general.

【Please tell me the point of installation and hang (in the case of Hard parts)】
nothing special. Easy

[Is there anything I was disappointed about?]
nothing special. Blue also examined, but the color was different from taste. It was a nice color here.

【Hope for Manufacturer - Please let me know if you have any improvement points]
Although it may be requested to the retail store side including Webike, if the color sample and the real thing are quite different, the feeling of disappointing when unpacking is not hesitant. (This product Blue was like that) Because there are many things that you can not see.

【Have you compared items?】
Not particularly this time. Previously I used Posh.

[Others]
SSK has somewhat expensive things, but I think the finish of the product, the quality is good. I had dropped Part SS of Bar End before but I got only Parts at an appropriate price and I think that after is also good.

'