Kembali ke atas

Buy with web! ke Motorcycle Install at store
So I got it by a mechanic

Eleven months later, broken due to disconnection of the red Red circle part

I do not know the details

Motorcycle shop mechanic says
"This structure is too thin a line of weakness to be pulled with Handlebar" And that

Valve's performance - The fundamental part other than the cooling performance seems to be poor

It is regrettable just because I felt that it was bright as brightness


I only ran about 6000 km

Speaking of Plug NGK trusted Brand
Historic PlugManufacturer
Failure of the Plug itself has been in use for many years but never once.


Installation can be done with almost pon. It is for PCX2 type, but it also attaches to type 3 without problem. It is a bit ImageDown that Slit is coarse and Core is visible. Mesh will also backtrack and try Custom.

This led was hard find bt i found from this site thank first for that web bike team. The security system link with that easy plug and fit it to near mirror clam it is very bright at the night. It is very good bright because it antitheft and i can park my bike places, also it is waterproof. battery cosume is very low no problem even i use it months beacause battery was in good health all time it only take 0.3amp , talking about the shiping it was fast and package is saftly again thanku good service.

HELLO I'M SATISFIED OF THIS PRODUCT. SO I NOTICED AROUND 5000 RPM ,THE ENGINE SEEMS LIKE TO HAVE BLOWS. AS IS AN RACING PLUG YOU HAVE TO MAINTAIN A CERTAIN POWER FOR AVOIDING BLOWS.UP 5000 RPM YOU HAVE GOOD SENSATIONS.

We used this item when setting Carburetor. There is no particular problem with stable quality. Strongly speaking, if it is a little cheaper it is Large satisfied ...

I bought it with Mirror exchange of the 2017 year Grom, but ...
I installed Style fun and cool.
The installation of the car body was installed snugly.
It is only the ground that you can adjust the angle of Mirror.
The angular width is small to turn it upwards, and I do not add it at all.
For two days I worried about various good ideas but abandoned it.
It will not be a shame.

very bad quality... the product seem like a china second hand mirror ... i will not install it on my bike...cant accept it

OEMValve surprisingly deteriorated severely, I chose this product of Heat sinkType from Large change high performance using other Manufacturer's LED Bulb with other two wheels.
Although Rear's Rubber cover requires a little processing to install, it is not a big problem.
Since Heat sink is exposed under the Fender behind the heat dissipation in the summer, there is no Trouble.
Depending on Manufacturer, it was said that there is a problem with quality, but there is no such worry.
There is no problem with riding the light almost every day at work without problems.

I'm from sri lanka , its hard find OEM products here bt when i saw this site and orderd it fast shipped also a hight tone siren alarm here no need to aditional work just plug security harness thats all need. The packing of package is good and secure , they even give you two security stickers and wire tides. Alarm amed in 60s and when you repair your bike or filling fuel to bike you can turn it off thats a good option . Finnaly to say its good product no need about your bike battery life,

Хорошо и плотненько наделись, рукой прикасаться приятно, выглядят стильно (для тех кто не любит пестрости а больше склоняется к строгим класическим цветам) Вообщем покупкой доволен, рекомендую! Google translate: Well and densely put on, hand to touch nice, look stylish (for those who do not like variegated and more inclined to strict classical colors) In general, the purchase is satisfied, I recommend!

- Decision of purchase
I went to Honda DREAM for 6 month check and I was talking about Security, from a clerk "It is necessary if Custom has done so far!" It was a word of.

- Impression after using it
Although it is an option of Honda Alarm, you can visually check the operation of Security. after "Security is working" And I announce you with a flashing and security sticker around, I think that it is effective as Security.

- Mounting difficulty
Security so detailed content can not be posted - - - The traditional Indicator Lamp installation position is pasted to the Tank section, but when you stick it to the Tank section, Wiring becomes exposed and it is not good looking. So when I looked it up in the Net search, Owner, who is located in a really good place, was there and I took the placement of Mr. Owner as reference. Wiring is long because of the Universal Product, and it gets messy when added. I hated the sense of frustration so I processed Wiring and took effect. (Sec

- Others
You can check the blinking of the Indicator Lamp even during the day and think that the blinking of Indicator Lamp is more noticeable at night. I think that it is an optional item essential to Honda Alarm, but if this is set to Alarm it seems that selling price may be slightly higher, but I think that - - - - How about Honda?

Knuckle visor, which was used from the front mold LEAD in the same way,.
Easy installation, shape is also good Large changeable. Only worry about degradation of Double-sided Tape.

Installed to prevent the state where Headlight stays on when Eyed Ring stop. (It gets scolded by voltage drop indication of Grip heater)
Body is Small Type, it fits neatly inside Cowl, but I want you to make Small a little more.
Since it is ON-OFF with Battery voltage, the operation Timing is RoseRose

Since I used to love DAYTONAScreen from the former type LEAD, I did not hesitate and even buy a new type LEAD. Shape etc. , Rectification is an item being considered, but slightly dissatisfied because the shape of the front mold was good.
Mounting.... Hard to understand

'