Kembali ke atas

What can I say-the jet a little added maximum speed/ performed efficiently and accurately. take not the first time I recommend to buy+is better than drilling yourself. KITACO!

Famous first ○ ○ ○ I was thinking of the LED of House but in the case of MONKEY in installation, there were difficulties and I was looking for various items I went for this product.
There is a clear difference if compared with NORMAL.
☆ If the price is a bit lower ☆ 4

VINO SA10Jfor Front
Despite ordering by looking at the conformance chart, Small one by one.
What is the conformance table for what ??

Still if you install it, Brake is not working at all with a skusca.
I returned to OEM with haste.
It is troublesome twice.

Vino (5AU SA10J) We mounted on.
Play adjustment was approaching the limit, so in January this year
We purchased it from Wei Big, but it was not possible to work with Large snow continuation,
Finally we completed the exchange.
The exchange work itself is not difficult and it is finished in a short time. Return Spring too
It was not so stiff and it caught easy with Spring hook.
There is a notch which spits Dust on the surface of Shoe.
I still have no hit, but I think that the goodness of the effect is the better one.
Front brake is more used than Rear so it will be nice to last long.
Next product is also a product I want to purchase Repeat.

Bought this candle is of excellent replace the old original ngk6/ instead of the old spark..remove the acceleration is faster and smoother, compared to a bad running motor, like a rag.I recommend, as shown by this Japanese quality speaks for itself.thing*Купил этоу свечку отличного качества.для замены старых оригинальных ngk6/ вместо старой свечи..снять разгон стал быстрее и плавнее, по сравнению с плохим запуском мотора, как тряпка.Рекомендую, как показали себя с хорошей стороны-японское качество говорит само за себя.вещь

Purchased these candles are of excellent quality.replace the old(suzuki v110) instead of the simple standard candles NLC..Take off the acceleration was quicker and smoother compared to the previous candle.Recommend;as the show.

I intended to replace it from an OEM bulb, but as I tried to replace it was the same form of Small thread
Halogen bulb was equipped. (Because I had never been replaced by a used car)

It may be affecting that the current Lamp ball was blacked a bit,
It got much brighter. Speed ??of the original is nearly satisfying brightness.
Not only the irradiation destination, but also the hand is bright feeling.

The light source is also very natural color and safe.

The price is about 3 times as much as the OEM ball, but I think that it is worth the price.

I replaced it with ReflectorHead lamp of Tanaka Shokai but purchased this because the attached BlueHalogen is not so bright.

As written in the joked package 'Bright' is!!

Both high and low will be pretty bright. I am satisfied..

I used a Halogen sphere of MICHIBA, a Manufacturer who I do not know well, but since the low ball has run out, I replaced it for this product. When exchanging from NORMAL sphere to MICHIBA, it rarely felt the difference, but this product is good enough to think that Lens cut changed. First, the irradiation range of row is Quantity : Pair (for Left and Right) It gets wider, and the high lights far in the form of Spot. I am surprised to see whether the same Halogen is different up to here ....
However, because of high efficiency, life is a little worried.

Good startability and Axel's reaction improved (^^)

Start dash becomes easy and I feel powerful even on the uphill slope (^-^)
I think that the Iridium plugs are high on the Cost side compared with the Normal plug ...
There is a sense of security and satisfaction (^u^)

I installed it in GRAND AXIS
Although it demonstrates a certain level of performance even with a ponding
If you do not set it again
I wake it so I purchased MJ and SJ's number together
It looks better.
The height of Manifold is also subtle
Even if Manifold of a different Manufacturer is also tried
I think whether it is good..
Between Manifold and Reed Valve
The insulator is deteriorated if it is Rubber
Since it may fall, Flange type
I think that it is better.

Because Brake of commuting VINO has become dead
Purchase, quickly, installed.

It works, it stops,

Even if you shake with Brake because Shoe has grooves
I will not cry.

The price is also very good at hand

I used 12v 30w thing attached to masters.
Certainly Home centeretc. Compared with the sola sold in. (It will not brighten dramatically)
However, whether the solder used for the contact part with the electrode of Valve is not very good, or if it ran about 4000 km, the solder melted with heat and broke.
It may be a fate of high efficiency Valve, but it is too bad that the price is expensive.

Dual head of CBR 150R is dark. 18WX2 So there are some sides that can not be helped, but it is too dark as a motorcycle that can run on highways. So I tried putting the classic pine Stripe. It got pretty bright and I became able to run freely without anxiety.
Although it is dark compared to HID and LED which became the mainstream of four wheel vehicle, CBR 150R is AC power supply (FlywheelMagnet) Therefore, when it is tried to change to the HID and LED of the DC power supply, it has to be replaced from the power supply itself, and even if it is difficult to make it by hardship, the focus often does not suit well, "Too much labor and no success" Sometimes it becomes. Light of AC power supply is easy and reliable to replace with pines Stripe.
There are also people who want to make the number of Watt Large by thinking to make it bright, but it is meaningless rather than to Flywheel Magnet car with a limited amount of electricity generation, rather it gets dark, so it is good to keep Watt number as Standard.
When attaching Valve of PH 7 type, as to keep the convex part of the Gold tool properly in the concave part of Light. If you do not do this, the focus will come to strange places.
The disadvantage of the pine Stripe Motorcycle beam is that there is somewhat difficulty in product accuracy. I purchased it many times, but there were times when the position of the Filament was misaligned, and Glass itself was distorted. When buying at the shop front, it is good to check whether there is any distortion. In the case of mail order, when it arrives, let's check firmly before opening to see if the accuracy is accurate.

Although it was exchanged from the LED manufactured by China, I thought that the LED was bright as it was, but because of optical axis and various problems, I replaced it with Halogen B 2 C of Pine Stripe.
While changing from LED to Halogen, I was prepared for a considerable amount of light Down, but what is not enough brightness! And, unlike LEDs Lo. Hi change is also clear! Clearly! It is different from the LED! It was the correct answer after exchanging for Halogen! Those who feel dark in this Valve think that repair of the electrical system is necessary (LOL smile)
Obviously it is brighter than OEMHalogen bulb! Naturally (LOL smile)...