- Beranda
- Motor
- HONDA 251 - 400cc
- CB400 FOUR (CB400F) (Air cooled)
- Sparepart Motor
- Sparepart Mesin
- Sparepart Intake
- Sparepart Karburator Lainnya
- BRC
- BRC: Plat Debu Karburator B
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Kuantitas : 1 Set untuk 1 Kendaraan (1 Set 10 item) : Piringkan 2 lembar. + Washer untuk Mounting + Nut)
Suku Cadang Karburator OEM Eksklusif
Bahan : Tahan karat Quantity: For 1 vehicle (10 points set of 2 plates + washers + nuts for installation)
Special parts for stock carburetor
Material: Stainless steel
Suku Cadang Karburator OEM Eksklusif
Bahan : Tahan karat Quantity: For 1 vehicle (10 points set of 2 plates + washers + nuts for installation)
Special parts for stock carburetor
Material: Stainless steel
[Deskripsi]
Ini adalah pelat sambungan tipe kaca yang dipasang di sisi baut penyetelan karburator. Pelat ini sangat penting saat menyetel karburator untuk penyetelan karburator, dan ada kalanya empat katup throttle tidak dapat dinaikkan secara bersamaan karena keausan di bagian dalam.. Jadi, jika Anda menggantinya, Anda akan bisa mendapatkan 4 dari mereka secara bersamaan. Terbuat dari stainless steel tahan karat dan ketebalannya sengaja dibuat 1mm (5 kali lebih tebal dari OEM 0.2mm) untuk memperkuat kemampuan sambung karburator kiri dan kanan agar katup throttle karburator kiri dan kanan dapat dinaikkan secara bersamaan. BRC telah memproduksi suku cadang ini selama 16 tahun dan telah menggunakannya untuk setiap perbaikan karburator. Untuk alasan ini, kami belum menjualnya sebagai bagian tertentu, tetapi baru-baru ini kami telah menerima banyak permintaan untuk solusi, jadi kami memutuskan untuk menjualnya. Inilah mengapa ini adalah bagian yang sangat diperlukan dari penyetelan karburator.
Ini adalah set 10 buah yang mencakup 2 pelat, ring dan mur untuk pemasangan. Itu terbuat dari stainless steel yang tidak akan berkarat.
Bagian ini berkarat dan kotor dan Anda mungkin ingin membersihkannya. It is a connecting plate in the shape of ring attached to the side of the carburetor tuning bolt.This plate is particularly important when tuning the carburetor, as wear and tear can cause the parts inside to rattle, often preventing the four throttle valves from being raised simultaneously.Therefore, if you replace these, four of them will be raised at the same time.The material of this product is made of stainless steel which does not rust, and the thickness of this product is intentionally made 5 times thicker (1mm) than the stock product (0.2mm) so that the throttle valves of the left and right carburetors can be raised at the same time.BRC has been producing this part for 16 years and has been using it in every carburetor overhaul.Therefore, BRC has not sold it as a part, but recently BRC has received many requests for it, so BRC decided to sell it.Therefore, it is an indispensable part for carburetor adjustment.
This 10-piece set includes 2 plates, washers and nuts for installation.It is made of stainless steel, which will not rust.
This part is rusty and dirty, so it is recommended for those who want to clean it.
Ini adalah set 10 buah yang mencakup 2 pelat, ring dan mur untuk pemasangan. Itu terbuat dari stainless steel yang tidak akan berkarat.
Bagian ini berkarat dan kotor dan Anda mungkin ingin membersihkannya. It is a connecting plate in the shape of ring attached to the side of the carburetor tuning bolt.This plate is particularly important when tuning the carburetor, as wear and tear can cause the parts inside to rattle, often preventing the four throttle valves from being raised simultaneously.Therefore, if you replace these, four of them will be raised at the same time.The material of this product is made of stainless steel which does not rust, and the thickness of this product is intentionally made 5 times thicker (1mm) than the stock product (0.2mm) so that the throttle valves of the left and right carburetors can be raised at the same time.BRC has been producing this part for 16 years and has been using it in every carburetor overhaul.Therefore, BRC has not sold it as a part, but recently BRC has received many requests for it, so BRC decided to sell it.Therefore, it is an indispensable part for carburetor adjustment.
This 10-piece set includes 2 plates, washers and nuts for installation.It is made of stainless steel, which will not rust.
This part is rusty and dirty, so it is recommended for those who want to clean it.
Peringatan
* Ini adalah produk eksklusif karburator OEM. Ini tidak dapat dipasang kecuali untuk karburator OEM.
*This part is only for stock carburetor.This cannot be used with other than stock carburetor.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/