Belanja Berdasarkan Model

It is Hammer which is indispensable when one wants to knock one such as inserting and inserting Shaft and Tire's Bead at the end at exactly good Large weight.

Unless it is used only for Motorcycle and car work and does not do Large construction work, it is also released from KTC "UD 7 - 10" The usability is better for.

Because, this "PH 68 - 344" Because the sharp point of the nail is used only to suppress the protrusion after driving the nail. I thought that I could use it once for board Gold, but it was too heavy and it was difficult to moderate power, after all I gave up.

on the other hand "UD 7 - 10" Is a combination with Plastic hammer, and there are also scenes that are used in car and motorcycle work in Large. Although there is not much turn in light work, it is very convenient in scenes to dismantle.

The ordinary Hammer was in the Set tool, but since Praghan was not there, it was purchased additionally. It is useful when you striking gently instead of tapping with hands. weight - Both Large and Kimi are good, Large enough to enter the tool box is good

【What made you decide the purchase?】 Required
To detach Wheel and to hit when necessary.

【How was it actually used?】 Required
It is safe to use without worry of hurting. But let's keep in mind that it's not absolute.

[Is there anything I was disappointed about?] Required
Nothing in particular.

【Hope for Manufacturer - Please let me know if you have any improvement points]
It has been around for 3 years since I bought it, but I have not seen it in particular.

【Have you compared items?】 Required
There is none.

[Others] Any
It is Plastic hammer. Let's pay attention to usage. If you strike the other side is dirty, hitting it with Small stone etc. sticking in. I can not take it.. I can not use one side. (For places where you can scratch it - There is no problem if it thinks that there are 2 sides for scratching)

Poached together when purchasing Combination hammer UD 7-10. I am fine... Because it is clumsy, if you remove it, it will easily shave off corners, so you can not relax and work without Spare. (Should I buy two?... )

Agricultural machinery at work (Tractor, Combine) etc. Because I am using it for driving Bearing and Oil seal, I know the ease of use, so I wanted for my own use for Motorcycle and it piced. Balance is good for both Length and weight, and it is hard to get tired with using it, so I thought that I wanted myself some time.

Although a screw thread may adhere to by old vehicles at the time of a Maintenance and it may be very hard, when such, it is very convenient to strike a tool. If it strikes by hand, work will progress very much to power not being transmitted well but a hand only becoming painful.
It is recommended by all means at those who are always taking pains over the hard screw thread.

A price is handy too! The function as a
Hammer is also very good.
It is ww that was large in it being unexpected, although it was unexpected.