- Beranda
- Sparepart Motor
- Knalpot
- DB Killer
- K-FACTORY
- K-FACTORY: Peredam Knalpot
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Rincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
[Bahan] Finishing Baja / Kromat
[Ukuran]
Diameter Luar Bagian Maksimum : Sekitar Φ54mm
Diameter Luar Bagian Pipa : Sekitar Φ32mm
Panjang keseluruhan : Sekitar 125mm [Material] Steel / Chromate processing
[Size]
・Maximum outer diameter: Approx. Φ54mm
・Outer diameter of pipe part: Approx. Φ32mm
・Total length: Approx. 125mm
[Ukuran]
Diameter Luar Bagian Maksimum : Sekitar Φ54mm
Diameter Luar Bagian Pipa : Sekitar Φ32mm
Panjang keseluruhan : Sekitar 125mm [Material] Steel / Chromate processing
[Size]
・Maximum outer diameter: Approx. Φ54mm
・Outer diameter of pipe part: Approx. Φ32mm
・Total length: Approx. 125mm
[Deskripsi]
Ini adalah penyekat batin untuk peredam Quattro, Diablo-S, MotoGP.
Inner baffle for Quattro, Diablo-S and MotoGP silencers.
This baffle is attached to the silencer tailpipe inlet to muffle the sound.
This baffle is attached to the silencer tailpipe inlet to muffle the sound.
Peringatan
* Diperlukan untuk membeli kerah spacer secara terpisah jika digunakan untuk [GP Silencer : SS2] (Nomor Suku Cadang : 000KPECGAA4540).
1 : Ketika sisi pipa ekor instalasi adalah Φ60,5 : Warna spacer tipe B.
2 : Saat memasang sisi pipa ekor samping adalah Φ54 : Spacer Collar Tipe A. (Ini membutuhkan adaptor Φ54 di sisi peredam.) *Cannot be used for MotoGP Round S Silencer / Stage2.
*Depending on the silencer diameter, spacer collars may need to be purchased separately.
(Used between the included spacer ring and the tail pipe)
(1) When the installation tail pipe side is Φ60.5: Spacer Collar B Type
(2) When the installation tail pipe side is Φ54: Spacer Collar A Type
*In case of MotoGP silencer, Φ54 adapter is required on the silencer side.
*If not used, there will be a gap between the silencer and the tail pipe, causing the silencer to flap.
*There may be changes in product specifications due to the manufacturer's reasons.
1 : Ketika sisi pipa ekor instalasi adalah Φ60,5 : Warna spacer tipe B.
2 : Saat memasang sisi pipa ekor samping adalah Φ54 : Spacer Collar Tipe A. (Ini membutuhkan adaptor Φ54 di sisi peredam.) *Cannot be used for MotoGP Round S Silencer / Stage2.
*Depending on the silencer diameter, spacer collars may need to be purchased separately.
(Used between the included spacer ring and the tail pipe)
(1) When the installation tail pipe side is Φ60.5: Spacer Collar B Type
(2) When the installation tail pipe side is Φ54: Spacer Collar A Type
*In case of MotoGP silencer, Φ54 adapter is required on the silencer side.
*If not used, there will be a gap between the silencer and the tail pipe, causing the silencer to flap.
*There may be changes in product specifications due to the manufacturer's reasons.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/