The Helmet holder of Standard Equipment needs the desorption of RearSeat and there are times when it is troublesome and purchase. Feeling of use is low mounting position, HelmetD ring hard. Installation can be done without difficulty. Mounting Bolt changes from Bolt with flange to designated attached Bolt, but Screw lock seems better.
2017 MT-09 Racer used with GIVISpecial rack SR 212 1 and Set.
Although it took time to understand the relationship between this case and Base, there was no problem as long as it was installed.
(For initial top case installation)
It seems possible to install another Size, but I chose it because it seems that the fit is more beautiful.
When we arrived, it was already floating from release paper.
It seemed that the adhesive strength was not 0 and the season was still hot, so I tried adhering to Tank in the meantime and then it will float after a while.
As another means, by holding down from above for a long time, I hope that the shape of Pad itself will become familiar with Tank, I will keep curing Tape from above and keep it familiar 2 months.
I thought that it would have become familiar with it and seemed to be sticking somewhat when removing the curing tape.
But. It floated on the next day.
If you leave it like this, you will scratch the painting of Tank if you get in dust, so you only have to peel off.
It is mere Large loss.
Feeling of use
As expected, it is sweeter than Bolt stoppage to Carrier, so if it is a box with a horizontal width, it will become more severe for the unbalance of luggage etc.
However, it is fixed more firmly than expected, and there is little wobble.
I am wearing a box named B 47 of GIVI, but I think that the box width up to about 30 L is about 40 cm, so I feel that the feeling of use does not change from the one fixed to the carrier.
As this product is once taken BALI, I think that Seat will not be scratched immediately, but if it fixes, the Gold genus part will be strongly pressed against Seat, so long term use and heavy luggage etc If you post it probably Seat will be torn.
Also, since the width of the item is narrow, Belt for fixing also goes to Cowl
To be strongly pressed, Belt's rubbing measures are also necessary.
For the wounds of Seat I will fold the micro fiber toowel for washing for Vehicle for the time being.
We have not taken countermeasures concerning Belt's rubbing, but we plan to paste a scratch prevention Seat on the Cowl side.
I ordered AKRAPOVIC but it was not in stock and it was treated as Cancellation and I bought the second candidate for this item. No complaints about quality, accuracy, performance! Design is a little long, being away from the car body is Minus Point. OEMPannier case can be used, convinced by cancellation with an official product. Sound quality is quieter and less satisfying than OEM Product.