Kembali ke atas

It chose by appearance.
A portion black when grasping is collapse.

Since it was cheap, it purchased in passing at the time of bore up.
Sealing also becomes brave.

It was used for the monkey of normal (49 cc).
Although changed from the high cam of JUN, it says clearly and Power is completely different! Although it is natural, that Power of the high rotation area went up also has the torque in an inside rotation region rather than a JUN cam, and it rides easily by a torque fully.
of course, the maximum high speed is also extended!!! being related with setting of a carburetor -- the time of the influence of important effectiveness, or a JUN cam -- # -- it fell about by ten.
In attaching, it was a little troublesome that valve recess processing of the piston had to be carried out for reservation of valve clearance, but Power who wipes out the difficulties was obtained ^^

It could come to attach a power rev to the dax, and is very much satisfied.

It is better to be purchased after checking conformity well since a cub changes the form of the piston of a bore up kit by a model.
Wearing is very easy and a special tool in particular does not need it, either.
It can work, even if a description is also polite and it does not take down an engine.
And after carrying out bore up, it ran about 300 km, but so so, there is also torque and it is easy to run it.
When bore up was carried out, the piston became heavy, and since the maximum high speed did not come out of whether high rotation comes to be hard in the surroundings from the time of 50 cc by a pure sprocket, F sprocket was made into 16 dishes.
however -- still -- the maximum high speed -- 70 km/h -- just for a moment .
A high cam may also be needed if bore up is carried out.
But surely torque becomes strong and bolt-on is opened wide from two-step right-turn and 30-km/h regulation by registering two sorts.
Although the goods themselves were very good, since 笆ウ mark attached to the rear fender which will follow if you buy the bore up kit of the manufacturer of the other company was not attached, they are four stars.
In the direction which has ridden on a 50-cc cub by Ho who usually has license of two or more flowers, it is recommended by all means.

It is better to be purchased after checking conformity well since a cub changes the form of the piston of a bore up kit by a model.
Wearing is very easy and a special tool in particular does not need it, either.
It can work, even if a description is also polite and it does not take down an engine.
And after carrying out bore up, it ran about 300 km, but so so, there is also torque and it is easy to run it.
When bore up was carried out, the piston became heavy, and since the maximum high speed did not come out of whether high rotation comes to be hard in the surroundings from the time of 50 cc by a pure sprocket, F sprocket was made into 16 dishes.
however -- still -- the maximum high speed -- 70 km/h -- just for a moment .
A high cam may also be needed if bore up is carried out.
But surely torque becomes strong and bolt-on is opened wide from two-step right-turn and 30-km/h regulation by registering two sorts.
Although the goods themselves were very good, since 笆ウ mark attached to the rear fender which will follow if you buy the bore up kit of the manufacturer of the other company was not attached, they are four stars.
In the direction which has ridden on a 50-cc cub by Ho who usually has license of two or more flowers, it is recommended by all means.

this is only for one jet it fitts the honda today perfectly i noticed that the numbers were the same as the original but may have been changerd before non the less you need this for the 80cc bigbore

I purchased this clutch cover. I'm very pleased with it.Made of solid aluminium and has nice shape. The anodized color of blue fit the rest of My parts. I recommend this component with a relaxed heart every Monkeybike owner.

I use this kit with a combination of CR-mini and Mukawa ZStyleExhaust System Type 2 Exhaust System.
It will turn without Stress until 12000 rpm. There is also Torque from low rotation, it is feeling that it is easy to get on and fast.
Clutch is not sliding on NORMAL and needs strengthening. Because I did not want to change Normal clutch cover I am using 3-type of Mukawa river, but I start to slide slightly when I chase.

Z125 PRO with Endurance Rear carrier, 30? Top Case (K-MAX) I'm attaching.
It was Exactly with this Size Cover.
Both Front and Rear have a hole through which Chain lock passes, which is useful..
Belt for flapping prevention comes with 1 pc.
I think that it is good to purchase additional Belt when it is worrisome to look at the situation.

We used this item when setting Carburetor. There is no particular problem with stable quality. Strongly speaking, if it is a little cheaper it is Large satisfied ...

Oil I replaced it with iron powder attached to Magnet which was installed at the time of replacement
I will attach it to the future Motorcycle
I think that it is expensive The price is high

Up to now Nore cam & Spring Bore Up Kit + JetSetting and Limiter cutSpec.. The troubles with abnormal vibration of ValveSurging and awkward output characteristics were solved like a lie. Once there is a DAYTONA 75cc Bore Up Kit compatible product, but there is also a cheap Made in Taiwan88cc Bore Up Kit so far it has neatly turned upwards and the feeling of shaky going out has also disappeared. Durability is currently being confirmed at around 300 km per month with commuting + short touring one month. It is nice that Cam and Valve Spring are packaged together. It is saved to reduce one troubling Masching trousers.

Delivery was quick as expected. the build quality of the mirrors are excellent with premium grade aluminium. it is easy to set with lock washers for the radial stem. no vibrations during the ride and excellent vision when set properly.

I have heard the reputation of this Plug, but I tried buying it to be handled by Webike.
So far as Watani's designation OEM DPR Gap 1. I adjusted it to 3 mm and used it. Ignition system and lighting and fans (Cause of voltage eating) And is completely processing Wiring is divided.
Even when I changed Igniter and Coil "Beauty is on fire" Although I was impressed with this, I will go further up when I put this in. The cloudy rush of about 5000 rpm from Clutch meat is like Silky, it seems that generations have gone lightly for about 10 years. I feel that my heart or exhaust smell has also decreased (Lol)
However, it is said that the introduction of Wotani SPll is the Large premise as minimum as Mr. Shimaba says from the import distributor. Horribly Gap is wide so fire will not fly in the same Coil.
If the fans turn around due to heavy traffic in the summer, there are many misfires → JR 8C installed, but ... If you want to enjoy drastic solutions and fine Feel, I recommend this combination.

'