HONDA STEED600desktop_pages_mt_index.motor_name_h1

HONDA STEED600

Kapasitas Mesin 583cc
Horsepower Maksimum 36ps(26.5kw)/6500rpm
Torsi Maksimum 4.5kg・m(44.1N・m)/3000rpm
Berat Total 217kg
Kapasitas Tangki 11 Liter

675 Produk

Produk Terbaru

Ulasan Produk

I made this Filter the same as last time in the third Oil exchange.
Filter wrench is not required, there is no new expense, even in terms of performance
Since I could use it without problems, I would like to repeat it in the future.

HELLO I'M SATISFIED OF THIS PRODUCT. SO I NOTICED AROUND 5000 RPM ,THE ENGINE SEEMS LIKE TO HAVE BLOWS. AS IS AN RACING PLUG YOU HAVE TO MAINTAIN A CERTAIN POWER FOR AVOIDING BLOWS.UP 5000 RPM YOU HAVE GOOD SENSATIONS.

I thought that it could be cheap at with Magnet, purchased, nothing was Paint on the exterior It was good at Simple
Since the tightening Torque is stated in the OEM, I watched it and installed it, but the next time I need to look it up
MT07 was 15 Nm

Oil Filter is exchanged periodically, but performance is not problem at all.
Also, as long as it functions as a filter, Manufacturer thinks it is unnecessary to keep in mind.

Because this Brake Pads is made of a hard material, its characteristics will be exactly as it is.

- The life of Pad is long (Hard to reduce) Instead, discs are reduced.
- Almost no Brake dust. (Wheel is not soiled)
- BrakeTouch becomes stiff. (Feeling like when changing to Mesh hose)
- Brake Squeak easily.
- Brake The effectiveness of the beginning of the hand grip is weak, but if it grips strongly it works strongly.

It is ineffective when it is cold again. Especially the start of running in winter
Attention required.
On the other hand, it seems to be strong against heat, and if Brake warms up to some extent it will improve its effectiveness.
I think this Brake characteristic is suitable for Circuit driving and Long touring
, Usual city riding, shopping etc.. It is a bit hard to handle when riding in.

Package says "Aggressiveness to Rotor Small Small", but that is an honest question.
I ran about 10,000 kilometers, but the disc was wearing as it was.
Instead, Pad is less likely to reduce, and the remaining amount of Pad is still there.
Indeed, Pad is superior to COSPA because it is hard to reduce, but if discs are reduced
I think how it is after all.
When I bought this Pad, it was relatively cheap Manufacturer,
Currently there are overseas cheap Pads, so I'm loving that now.

When we arrived, it was already floating from release paper.
It seemed that the adhesive strength was not 0 and the season was still hot, so I tried adhering to Tank in the meantime and then it will float after a while.
As another means, by holding down from above for a long time, I hope that the shape of Pad itself will become familiar with Tank, I will keep curing Tape from above and keep it familiar 2 months.
I thought that it would have become familiar with it and seemed to be sticking somewhat when removing the curing tape.
But. It floated on the next day.
If you leave it like this, you will scratch the painting of Tank if you get in dust, so you only have to peel off.
It is mere Large loss.

How much iron powder etc on Magnet etc. I'm not sure whether it is adsorbed, but with Filter + Alpha this price has a sense of security and sense of security. We will continue to use it in the future.

The grip of the Pro grip that I used so far came a lot, so if I order an exchange I will not come back to what the end of the year (T д T)

Up to now Grip used only Pro grip, but it was also mandatory for Pierced Type (Hand guard is for Bar Open End) , The other Manufacturer gave up despite the good Design even crying.

... thought that this is the case, I decided to avoid purchasing GripCutter at the same time and purchase the Closed End who wanted to use it more than before.

Ultimately, as Progrip gets tired of, RENTHAL 's PillowGrip or KEVLAR Grip and Domino' s Cross grip and hesitation, ultimately the color (Lol) Determined by ... Blue so (^_^;)

However, domino 's Cross grip seems to have a good reputation among others, which I also purchased, but I felt relieved when I saw the real thing (Lol).

Before that, regarding the installation, first of all Closed End 's Grip, so we purchased a GripCutter (Scheduled to be reviewed separately) Penetrating completed with a hole with cucumber using.

After that, remove the Grip to be removed from the Handlebar by spraying the Parts Cleaner and push the Grip which opened the hole and push the Parts cleaner onto the Grip again to install it.

If it is not easy to attach, including hand guard removal, the work will be about 30 minutes.

I do not like glue or Wiring, but it will hinder operation in the past etc etc. There was no problem, so I can not say it unconditionally, but I judge it as Large sturdy.

After completing the installation, I ran near the field immediately, but I felt that I absorbed the vibration well with a soft feeling than the earthquake-resistant Gel of the previous Pro grip.

However, since it is also Large thing after all, it is satisfied only with Large.

It seems short in durability, but I like it, so I think I will repeat it again.

Oh, I'd like to try using KEVLAR Grip, but it's after all Design or Large thing (Lol).