- Beranda
- Motor
- YAMAHA 751 - 1000cc
- YZF-R1 (R1)
- Sparepart Motor
- Bodywork
- Fairing
- Full Fairing
- SAITANIYA
- SAITANIYA: Full Cowl (Race)
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Untuk knalpot standar
Lapisan gel
Atas
Cowl samping (kiri dan kanan)
Under cowl
Termasuk 4 Quick fastener For full exhaust muffler
Gel coat finish
Upper,Side cowl(Left/Right),Under cowl
4 Piece, Quick Fastener Included
Lapisan gel
Atas
Cowl samping (kiri dan kanan)
Under cowl
Termasuk 4 Quick fastener For full exhaust muffler
Gel coat finish
Upper,Side cowl(Left/Right),Under cowl
4 Piece, Quick Fastener Included
[Deskripsi]
Ini dapat dipasang pada braket dan saluran pengukur STD.
Ini untuk pengguna khusus ras.
Jika Anda menggunakan braket pengukur STD, silakan beli braket penutup atas / braket pengukur STD (No. Bagian : 3Y5R1UPSN-CB).
Layarnya pas dengan layar buatan Saitaniya. This product can also be installed on stock meter brackets and ducts.
This is for racing-only users.
Please purchase the product for the upper cowl bracket / stock meter bracket (part number: 3Y5R1UPSN-CB) if you want to install with stock meter bracket.
Compatible with the windshield made by Saitaniya.
Ini untuk pengguna khusus ras.
Jika Anda menggunakan braket pengukur STD, silakan beli braket penutup atas / braket pengukur STD (No. Bagian : 3Y5R1UPSN-CB).
Layarnya pas dengan layar buatan Saitaniya. This product can also be installed on stock meter brackets and ducts.
This is for racing-only users.
Please purchase the product for the upper cowl bracket / stock meter bracket (part number: 3Y5R1UPSN-CB) if you want to install with stock meter bracket.
Compatible with the windshield made by Saitaniya.
Catatan
* Produk ini dibuat berdasarkan pesanan. Kami akan mengonfirmasi waktu pengiriman setelah pesanan diterima.t berbeda dengan aslinya.
* Setelah dipesan, produk ini tidak dapat dibatalkan, dikembalikan, atau ditukar.
Peringatan
*Jika Anda menggunakan kabel OEM, Anda perlu membeli bracket ECU dan bracket sisi kanan (Part number: 3Y5R1EH-CBK) secara terpisah.
*Jika Anda telah mengonversi ke kabel balap, Anda perlu membeli bracket cowl samping (Part number: 3Y5R1SCS-CB) secara terpisah.
*Bracket cowl bawah (Part number: 3Y5R1UCS-CB) dan bracket sisi kiri (Part number: 3Y5R1UCB) juga harus dibeli secara terpisah.
*Harap letakkan lembaran tahan panas di antara cowl bawah dan knalpot.
*Harap jangan memanaskan mesin lebih dari yang diperlukan.
*Tidak dapat dipasang ke knalpot standar.
*Bagian bawah white gel pada foto #1 untuk knalpot standar.
*Harap perhatikan sebelumnya bahwa pembatalan dan / atau pengembalian produk ini tidak dapat diterima setelah pesanan ditempatkan. *If you use the stock harness, you need to purchase the ECU holder and right side bracket (part number: 3Y5R1EH-CBK) separately.
*If you have converted to the race harness, you will need to purchase the side cowl bracket (part number: 3Y5R1SCS-CB) separately.
*Under cowl bracket (part number: 3Y5R1UCS-CB) and left side bracket (part number: 3Y5R1UCB) must be purchased separately.
*Paste the heat resistant sheet between the under cowl and the bracket.
*Do not warm up the engine more than necessary.
*Stock exhaust cannot be installed.
*Under the white gel image 1 is for stock exhaust.
*There may be changes in product specifications due to the manufacturer's reasons.
[about gelcoat]
*Gelcoat is the "base" for the paint.
*Because each color is set, other colors may be mixed in.
*Please note that this product is designed to be painted, so please be aware that other colors may be mixed in, and that the surface of the ground may show through when the split surface is finished (polished).
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
*Jika Anda telah mengonversi ke kabel balap, Anda perlu membeli bracket cowl samping (Part number: 3Y5R1SCS-CB) secara terpisah.
*Bracket cowl bawah (Part number: 3Y5R1UCS-CB) dan bracket sisi kiri (Part number: 3Y5R1UCB) juga harus dibeli secara terpisah.
*Harap letakkan lembaran tahan panas di antara cowl bawah dan knalpot.
*Harap jangan memanaskan mesin lebih dari yang diperlukan.
*Tidak dapat dipasang ke knalpot standar.
*Bagian bawah white gel pada foto #1 untuk knalpot standar.
*Harap perhatikan sebelumnya bahwa pembatalan dan / atau pengembalian produk ini tidak dapat diterima setelah pesanan ditempatkan. *If you use the stock harness, you need to purchase the ECU holder and right side bracket (part number: 3Y5R1EH-CBK) separately.
*If you have converted to the race harness, you will need to purchase the side cowl bracket (part number: 3Y5R1SCS-CB) separately.
*Under cowl bracket (part number: 3Y5R1UCS-CB) and left side bracket (part number: 3Y5R1UCB) must be purchased separately.
*Paste the heat resistant sheet between the under cowl and the bracket.
*Do not warm up the engine more than necessary.
*Stock exhaust cannot be installed.
*Under the white gel image 1 is for stock exhaust.
*There may be changes in product specifications due to the manufacturer's reasons.
[about gelcoat]
*Gelcoat is the "base" for the paint.
*Because each color is set, other colors may be mixed in.
*Please note that this product is designed to be painted, so please be aware that other colors may be mixed in, and that the surface of the ground may show through when the split surface is finished (polished).
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/