Kembali ke atas

【CHIC DESIGN】Handguard Guyra

Harga: Rp2,635,000

*Termasuk PPN 10%

Nikmati cicilan 0% mulai dari Rp219,583/bulan

Webike Points: 26,350 pts

Shipping point: 8.9 pts ( 8.9 pts x 1qty)
Ubah
DKI Jakarta, Jakarta Selatan, Cilandak
Biaya pengiriman
Rp9,000

    • Pilih varian produk:
    • Nomor Produk:
    • GG01

Mohon pilih varian produk terlebih dahulu.


Model yang Sesuai:

CB1000 SF (Big One) 92-97

Lihat lebih lanjut

Produk Terlaris

Rincian Produk

Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik Lihat versi asli

[Deskripsi]

Buku jari perisai untuk melindungi kepalan pengendara atau jari dari angin ketika menjalankan.
Guyra mengacu pada pakaian baju besi. Sarung tangan adalah bagian dari baju besi dan perlindungan untuk melindungi dari ujung jari ke lengan. Ini adalah baju besi untuk sepeda motor serta satu-satunya perlindungan satu aero untuk melindungi ujung jari pengendara, yang diperlukan operasi halus.
Untuk tubuh perisai menggambar permukaan kurva kompleks, mengadopsi 3mm ketebalan polikarbonat, sangat baik dalam daya tahan. Karena transparansi yang tinggi, ia mempertahankan cahaya perasaan sekitar pegangan. Bentuk perisai dibuat untuk mencapai efek melanggar angin maksimum tanpa mengganggu bagian keamanan yang diperlukan. Perisai set yang jelas dan asap. Untuk perisai pemasangan, mengadopsi sekrup stainless tahan lama, polycarbonate mesin cuci dan mur pengunci.
Dengan indah berlapis krom pemasangan tinggal, bolt-on yang dirancang untuk CB1000SF. Kompatibel untuk semua model tahun.

[Catatan]


* Warna tinggal pemasangan akan menjadi "hitam (Powder coating) ".
* The pemasangan tinggal tidak memiliki ruang dan lubang untuk memasang aksesoris seperti ETC.

Model yang Sesuai

    • CB1000 SF (Big One) 92-97
  • 4.3

    67 Ulasan

  • 5

    Memuaskan

    28

    4

    Bagus

    32

    3

    Lumayan

    6

    2

    Kurang

    0

    1

    Mengecewakan

    1
  • Tulis Ulasan

    I also searched on Long Screen whether or not it searches I did not see any clear answer, but I seemed to be looking, so I tried to purchase, anxiety hit me, I interfere with Screen, sleeping in the warehouse

    Although similar things are out of many Manufacturers, it is a common part that I see often, but perhaps it is the best one. Function, installation method, quality of Body, I think that everything is fine. The only disappointing thing is that the Reverse side of the installation Bolt is exposed so it looks bad. Some people may not be bothered, but I could not forgive, so I decided to use Universal Product Material : Plastic Cover bolt purchased and attached.

    Although similar things are out of many Manufacturers, it is a common part that I see often, but perhaps it is the best one. Function, installation method, quality of Body, I think that everything is fine. The only disappointing thing is that the Reverse side of the installation Bolt is exposed so it looks bad. Some people may not be bothered, but I could not forgive, so I decided to use Universal Product Material : Plastic Cover bolt purchased and attached.

    It was very good to use for NC 700X, so I purchased it for third generation 2016 type NC 750S although it was not included in the compatible model.

    If you were prepared for some modification, there was nothing, it took about 10 minutes with a pon attachment. This product, which is quite expensive, I think that there are also many people who can not be ready to purchase if they are not included in the compatible vehicle type List. Manufacturer, there is no business.

    As shown in the photo Simple construction makes installation easy to work together with Back Mirror. Moreover, it can be attached firmly.
    Unlike for Off-Road, the rectifying effect on the upper part of Handlebar is high, and wind and rain does not come from cuffs. It also covers the Clutch Wire part where rain and dust easily enter.
    In the winter, thanks to windbreak effects, cheap Winter Gloves never freezes like it hurts your hands.
    In the case of my choice Clear type, I do not feel much to wear, so I am honored that it does not damage the neat feel of Naked motorcycle.

    One thing that is worrisome is Quantity which fixes Polycarbonate Body and iron Bracket : Since 2 pc Stainless bolt Nut has no locking prevention, apply locking material, put Spring Washer, exchange with M6's loosening Nylon nut etc. etc. It seems better to take countermeasures. I chose Nylon nut.

    I sell various Knuckle guards, but I personally think that this is the best.

    It was very good to use for NC 700X, so I purchased it for third generation 2016 type NC 750S although it was not included in the compatible model.

    If you were prepared for some modification, there was nothing, it took about 10 minutes with a pon attachment. This product, which is quite expensive, I think that there are also many people who can not be ready to purchase if they are not included in the compatible vehicle type List. Manufacturer, there is no business.

    As shown in the photo Simple construction makes installation easy to work together with Back Mirror. Moreover, it can be attached firmly.
    Unlike for Off-Road, the rectifying effect on the upper part of Handlebar is high, and wind and rain does not come from cuffs. It also covers the Clutch Wire part where rain and dust easily enter.
    In the winter, thanks to windbreak effects, cheap Winter Gloves never freezes like it hurts your hands.
    In the case of my choice Clear type, I do not feel much to wear, so I am honored that it does not damage the neat feel of Naked motorcycle.

    One thing that is worrisome is Quantity which fixes Polycarbonate Body and iron Bracket : Since 2 pc Stainless bolt Nut has no locking prevention, apply locking material, put Spring Washer, exchange with M6's loosening Nylon nut etc. etc. It seems better to take countermeasures. I chose Nylon nut.

    I sell various Knuckle guards, but I personally think that this is the best.

    I installed in XSR 900.
    I installed it in wind protection main in winter, but the coldness of hand got relieved somewhat.
    Bracket is holding and the circumference of Handlebar gets messed up.
    The shape of Bracket is not good
    It was not satisfactory to join MirrorNut together..
    The price is also a bit high.

    Currently undone.

67 Ulasan Lihat semua

Produk Teratas

【CHIC DESIGN】GUYRA Gauntlet
Handguard Guyra CHIC DESIGN