- Beranda
- Motor
- HARLEY-DAVIDSON 1001cc -
- XL1200C Sport Star
- Sparepart Motor
- Bodywork
- Spakbor
- Spakbor Belakang
- CHIC DESIGN
- CHIC DESIGN: Spakbor Belakang Model Klasik
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Tubuh : FRP
Main unit: Made of FRP
[Deskripsi]
Spatbor belakang bernuansa klasik penuh dengan garis awal elegan yang memiliki bentuk menutupi ban dalam.
Meskipun menjadikan bintang olahraga klasik, hal itu menyebabkan perasaan yang mendalam dan kehadiran yang baik.
Dengan cetakan terintegrasi pelindung matt dan bagian yang dapat dilihat dari celah bingkai dibuat dengan aman.
Body terbuat dari FRP dan sesuai dengan lukisan warna asli lapisan gelcoat hitam. The rear fenders are full of classic taste with the shape that covers the tires deeply and the graceful initial line.
It gives a classic look to the Sportster, and at the same time, gives it a dignified and high-quality presence.
The mat guard is molded in one piece, and the part that can be seen through the gap of the frame is also well made.
The fender body is strong enough for pillion riding.
A small accessory compartment is set in the upper part of the fender, and ECM can be stored in the model with ECM set in the upper part of the fender (06--09) , and ETC can be stored in the other model years.
Available in black gel coat and stock color paint finish.
It is designed to be attached to the vehicle via an aluminum collar to prevent damage from overtorque and vibration.
It is necessary to drill holes to install the taillight.
・Woven with roving cloth to ensure sufficient strength.
It is also suitable for pillion riding.
・A small accessory box is set in the upper part of the fender which is hidden by the seat.
・ECM can be stored in the upper part of the fender for the models with ECM, and ETC can be stored in the lower part of the fender for any models without ECM.
Meskipun menjadikan bintang olahraga klasik, hal itu menyebabkan perasaan yang mendalam dan kehadiran yang baik.
Dengan cetakan terintegrasi pelindung matt dan bagian yang dapat dilihat dari celah bingkai dibuat dengan aman.
Body terbuat dari FRP dan sesuai dengan lukisan warna asli lapisan gelcoat hitam. The rear fenders are full of classic taste with the shape that covers the tires deeply and the graceful initial line.
It gives a classic look to the Sportster, and at the same time, gives it a dignified and high-quality presence.
The mat guard is molded in one piece, and the part that can be seen through the gap of the frame is also well made.
The fender body is strong enough for pillion riding.
A small accessory compartment is set in the upper part of the fender, and ECM can be stored in the model with ECM set in the upper part of the fender (06--09) , and ETC can be stored in the other model years.
Available in black gel coat and stock color paint finish.
It is designed to be attached to the vehicle via an aluminum collar to prevent damage from overtorque and vibration.
It is necessary to drill holes to install the taillight.
・Woven with roving cloth to ensure sufficient strength.
It is also suitable for pillion riding.
・A small accessory box is set in the upper part of the fender which is hidden by the seat.
・ECM can be stored in the upper part of the fender for the models with ECM, and ETC can be stored in the lower part of the fender for any models without ECM.
Catatan
* Gambar hanya untuk referensi. Gambar yang ditampilkan mungkin berbeda dari produk yang sebenarnya.
Peringatan
* Untuk memasang lampu belakang, diperlukan pengeboran.
* Pemasangan untuk 883L (Sangat rendah) sejak 2011 belum dikonfirmasi. *Please prepare the tail lamp and the license plate separately.
*This product cannot be installed with Sissy Bar Side Plate (53925-04), which is a stock option.
*Depending on the length of the rear suspension, it may interfere with the tires.
*Some of the products have parting lines (joints between molds) due to the molding process using split molds.It occurs at the joint of the mold and the mold, and there is no problem in the strength of the product.Please use it after painting or buffing if you are concerned about it.
* Pemasangan untuk 883L (Sangat rendah) sejak 2011 belum dikonfirmasi. *Please prepare the tail lamp and the license plate separately.
*This product cannot be installed with Sissy Bar Side Plate (53925-04), which is a stock option.
*Depending on the length of the rear suspension, it may interfere with the tires.
*Some of the products have parting lines (joints between molds) due to the molding process using split molds.It occurs at the joint of the mold and the mold, and there is no problem in the strength of the product.Please use it after painting or buffing if you are concerned about it.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/