- Beranda
- Motor
- HONDA 0 - 50cc
- MONKEY
- Sparepart Motor
- Rem
- Sparepart Rem Lainnya
- GM-MOTO
- GM-MOTO: Satu Set Rem Belakang untuk Velg 8 Inci
Satu Set Rem Belakang untuk Velg 8 Inci
- Nomor produk: mky-00209-bk
-
- IN STOCK
- Out Stock
- GM-MOTO
- |
- 1.0
- (1 ulasan)
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Bahan: Aluminium
Material: Aluminum
[Deskripsi]
Aluminium Cut-out Powerful Caliper 4 POD berlawanan dengan roda 8 Inch.
Seperti pada gambar terlampir, dimungkinkan untuk menginstal pada roda 8 Inch.
Selain itu, Caliper yang kuat dari 4 POD lawan merebut Rotor dengan gusar.
Kit Cakram Isi 8 Konvensional untuk 8 Inci, Kaliper Kecil dan gaya pengereman tidak bagus ・ ・ ・
Dan mereka yang menyerah, mohon pemeriksaan ulang dengan segala cara.
Swingarm ini adalah produk KEPSPEED yang memproduksi komponen aluminium kelas tinggi.
* GMStaff menyukai keegoisan Review *
KEPSPEED juga melakukannya lagi, tentu saja artinya bagus.
Kaliper Rem Mesin Aluminium CNC dirilis untuk Kit Cakram Belakang MONKEY, tetapi dapat dipasang pada roda 8 inci.
Tentu saja seperti biasa ini adalah separasi super Limit Javela, tapi saya sudah tersentuh oleh Wheel 8 Inch 4 J yang berputar dengan rapi tanpa menyentuh dimanapun.
Wajar saja, kesesuaian dengan roda 10 Inch tidak menjadi masalah.
Seperti Selang Hidrolik biasa tidak dijual dalam keadaan tersambung, terdapat Pembuangan udara di dua tempat yaitu Bodi Caliper dan baut Banjo, sehingga Anda dapat melakukan pekerjaan pembuangan udara pada saat pemasangan dengan relatif mudah dan andal.
Data Setting dari contoh gambar adalah sebagai berikut.
• Kit ini
• Lengan ayun dengan G2 F Stubby (Lebar bagian dalam 168mm individu)
• 8Inch4.0JWheel (Produk GM-MOTO)
• Hub Disk untuk Kit Disk Belakang (Produk GM-MOTO)
• Penjarak roda6.5mm (3,5 mm + 3 mm)
• Warna Poros dengan Flange (23mm)
Pengaturan bagian tengah roda tidak masalah dengan hal di atas. Strong machined aluminum opposed 4POD calipers are compatible with 8-inch wheels.
As you can see in the picture, it can be installed on 8 inch wheels.
In addition, the opposed 4POD caliper grips the rotor firmly.
The conventional rear disc kit for 8 inch calipers is too small and the braking force is not good.
If you have given up on the idea, please reconsider.
This swingarm is a product of KEPSPEED, a manufacturer of high quality aluminum parts.
*GM staff's selfish review*
KEPSPEED has done it again.In a good meaning, of course.
They have released a rear disc kit for MONKEY with CNC machined aluminum brake calipers, and it can be installed on 8 inch wheels.
Of course, it was a very close separation as usual, but 8 inch 4J wheel that rotated beautifully without touching anywhere is impressive.
Naturally, the fitment to 10 inch wheels is not a problem.
It is not sold with the hydraulic hose connected as usual, but there are two air bleed points on the caliper unit and the banjo bolt, so it is relatively easy and reliable to bleed the air when installing.
The setting data of the sample product in the image is as follows.
・Book kit
・Swingarm with G2F stabilizer (inner width of individual 168mm)
・8-inch 4.0J wheels (GM-MOTO product)
・Disc hub for rear disc kit (GM-MOTO product)
・Wheel spacer 6.5mm (3.5mm+3mm)
・Axle Collar with Flange (23mm)
Now you are ready to adjust the wheel center.
Seperti pada gambar terlampir, dimungkinkan untuk menginstal pada roda 8 Inch.
Selain itu, Caliper yang kuat dari 4 POD lawan merebut Rotor dengan gusar.
Kit Cakram Isi 8 Konvensional untuk 8 Inci, Kaliper Kecil dan gaya pengereman tidak bagus ・ ・ ・
Dan mereka yang menyerah, mohon pemeriksaan ulang dengan segala cara.
Swingarm ini adalah produk KEPSPEED yang memproduksi komponen aluminium kelas tinggi.
* GMStaff menyukai keegoisan Review *
KEPSPEED juga melakukannya lagi, tentu saja artinya bagus.
Kaliper Rem Mesin Aluminium CNC dirilis untuk Kit Cakram Belakang MONKEY, tetapi dapat dipasang pada roda 8 inci.
Tentu saja seperti biasa ini adalah separasi super Limit Javela, tapi saya sudah tersentuh oleh Wheel 8 Inch 4 J yang berputar dengan rapi tanpa menyentuh dimanapun.
Wajar saja, kesesuaian dengan roda 10 Inch tidak menjadi masalah.
Seperti Selang Hidrolik biasa tidak dijual dalam keadaan tersambung, terdapat Pembuangan udara di dua tempat yaitu Bodi Caliper dan baut Banjo, sehingga Anda dapat melakukan pekerjaan pembuangan udara pada saat pemasangan dengan relatif mudah dan andal.
Data Setting dari contoh gambar adalah sebagai berikut.
• Kit ini
• Lengan ayun dengan G2 F Stubby (Lebar bagian dalam 168mm individu)
• 8Inch4.0JWheel (Produk GM-MOTO)
• Hub Disk untuk Kit Disk Belakang (Produk GM-MOTO)
• Penjarak roda6.5mm (3,5 mm + 3 mm)
• Warna Poros dengan Flange (23mm)
Pengaturan bagian tengah roda tidak masalah dengan hal di atas. Strong machined aluminum opposed 4POD calipers are compatible with 8-inch wheels.
As you can see in the picture, it can be installed on 8 inch wheels.
In addition, the opposed 4POD caliper grips the rotor firmly.
The conventional rear disc kit for 8 inch calipers is too small and the braking force is not good.
If you have given up on the idea, please reconsider.
This swingarm is a product of KEPSPEED, a manufacturer of high quality aluminum parts.
*GM staff's selfish review*
KEPSPEED has done it again.In a good meaning, of course.
They have released a rear disc kit for MONKEY with CNC machined aluminum brake calipers, and it can be installed on 8 inch wheels.
Of course, it was a very close separation as usual, but 8 inch 4J wheel that rotated beautifully without touching anywhere is impressive.
Naturally, the fitment to 10 inch wheels is not a problem.
It is not sold with the hydraulic hose connected as usual, but there are two air bleed points on the caliper unit and the banjo bolt, so it is relatively easy and reliable to bleed the air when installing.
The setting data of the sample product in the image is as follows.
・Book kit
・Swingarm with G2F stabilizer (inner width of individual 168mm)
・8-inch 4.0J wheels (GM-MOTO product)
・Disc hub for rear disc kit (GM-MOTO product)
・Wheel spacer 6.5mm (3.5mm+3mm)
・Axle Collar with Flange (23mm)
Now you are ready to adjust the wheel center.
Peringatan
[Sehubungan dengan pemasangan]
Harap dicatat bahwa merk tidak akan menanggapi terkait dengan suku cadang merek lain karena telah diverifikasi dengan produk GM - MOTO.
Ini membutuhkan minyak rem (DOT 4 atau lebih) selama pemasangan. Sebagai tambahan, itu membutuhkan pekerjaan pengisian cairan / pembuangan udara.
Sebagai tambahan, itu membutuhkan untuk mendapatkan bagian terkait yang diperlukan untuk pengurangan cakram belakang seperti hub cakram belakang dan bracket silinder master.
[Garansi]
Ada kemungkinan goresan dan lecet kecil dapat terjadi saat pengiriman.
merk tidak akan tercakup dalam garansi kecuali untuk kerusakan yang secara signifikan merusak nilai atau fungsi produk.
Harap dicatat bahwa tidak ada pengembalian, penukaran dan pembatalan pesanan setelah memesan dengan alasan apapun.
Sebagai tambahan, masalah setelah mulai berkendara sering kali disebabkan oleh ketidaksesuaian dengan kondisi berkendara, situasi pemeliharaan, atau kondisi tubuh, dan dianggap sebagai pengecualian dari pencairan karena sulit untuk membedakannya dari penyebab masing-masing produk. [Notes on purchase]
*All GM-MOTO products are custom parts.Since these products are set up in response to the requests of heavy users, there may be parts of the product that change or decrease from the original driving performance.Please use as dress-up parts for show model machines.Therefore, it is not suitable for driving on public roads or tracks.In some cases, it may not be possible to mount the unit on a motorcycle, or adjustments and modifications may be required in various areas.
[About the installation]
GM-MOTO has tested this product with GM-MOTO products, so GM-MOTO is not able to answer about the compatibility with other manufacturers' parts.
Brake fluid (DOT4 or higher) is required for installation.In addition, it is necessary to fill the fluid and bleed the air.
In addition, it is necessary to separately procure the related parts required for the rear disc conversion, such as the rear disc hub and master cylinder bracket.
*Because it is made overseas, the molding, welding, painting, etc. may be insufficient.There may be some minor scratches and scuffs due to transportation problems.
*There may be changes in product specifications due to the manufacturer's reasons.
Harap dicatat bahwa merk tidak akan menanggapi terkait dengan suku cadang merek lain karena telah diverifikasi dengan produk GM - MOTO.
Ini membutuhkan minyak rem (DOT 4 atau lebih) selama pemasangan. Sebagai tambahan, itu membutuhkan pekerjaan pengisian cairan / pembuangan udara.
Sebagai tambahan, itu membutuhkan untuk mendapatkan bagian terkait yang diperlukan untuk pengurangan cakram belakang seperti hub cakram belakang dan bracket silinder master.
[Garansi]
Ada kemungkinan goresan dan lecet kecil dapat terjadi saat pengiriman.
merk tidak akan tercakup dalam garansi kecuali untuk kerusakan yang secara signifikan merusak nilai atau fungsi produk.
Harap dicatat bahwa tidak ada pengembalian, penukaran dan pembatalan pesanan setelah memesan dengan alasan apapun.
Sebagai tambahan, masalah setelah mulai berkendara sering kali disebabkan oleh ketidaksesuaian dengan kondisi berkendara, situasi pemeliharaan, atau kondisi tubuh, dan dianggap sebagai pengecualian dari pencairan karena sulit untuk membedakannya dari penyebab masing-masing produk. [Notes on purchase]
*All GM-MOTO products are custom parts.Since these products are set up in response to the requests of heavy users, there may be parts of the product that change or decrease from the original driving performance.Please use as dress-up parts for show model machines.Therefore, it is not suitable for driving on public roads or tracks.In some cases, it may not be possible to mount the unit on a motorcycle, or adjustments and modifications may be required in various areas.
[About the installation]
GM-MOTO has tested this product with GM-MOTO products, so GM-MOTO is not able to answer about the compatibility with other manufacturers' parts.
Brake fluid (DOT4 or higher) is required for installation.In addition, it is necessary to fill the fluid and bleed the air.
In addition, it is necessary to separately procure the related parts required for the rear disc conversion, such as the rear disc hub and master cylinder bracket.
*Because it is made overseas, the molding, welding, painting, etc. may be insufficient.There may be some minor scratches and scuffs due to transportation problems.
*There may be changes in product specifications due to the manufacturer's reasons.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/