- Beranda
- Motor
- KAWASAKI 1001cc -
- ZRX1200R
- Sparepart Motor
- Suspensi / Rearset / Velg / Swingarm
- Sparepart Velg
- As Roda
- Bagus! Motor cycle
- Bagus! Motor cycle: As Roda Depan (Chromoly) Tipe B
As Roda Depan (Chromoly) Tipe B
- Nomor produk: BG-AXS-B
-
- IN STOCK
- Out Stock
- Bagus! Motor cycle
- |
- 5.0
- (1 ulasan)
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Bahan : Chromoly SCM-440 Toner
Material: Chromoly SCM-440 material
[Deskripsi]
Saya hanya ingin membuat barang bagus ..
Bagus sudah menyelesaikan poros roda depan chrome-molly ..
Poros poros depan adalah satu-satunya yang mentransmisikan pergerakan garpu depan ke ban, yang bergerak sedikit ke setiap arah ..
Sulit untuk dirasakan, tapi ini tempat yang sangat penting ..
Kami ingin menjaga beban yang belum dipangkas seringan mungkin ..
Namun, konon poros titanium bisa saja retak, dan penggunaan poros titanium tetap dilarang oleh peraturan balap ..
Jawaban Bagus! Adalah cetakan monoblok lengkap dari kayu temper SCM-440 chromoly!
Bahan: Kayu temper SCM-440.
Finisher adalah bahan terbaik dalam chromolytic molybdenum yang memiliki ukuran butir yang seragam secara molekuler.
Ini membuatnya kuat dan tahan panas serta tahan terhadap distorsi ..
Ini adalah cara yang bagus untuk menghemat berat karena Anda bisa keluar dengan kutukan!
Proses pembuatan tidak berakhir dengan pemrosesan dan pelapisan.
Pemesinan & rarr; perlakuan panas & rarr; menyesali (untuk memperbaiki distorsi yang dibuat oleh perlakuan panas) & rarr; satu potong 10 & mu; lapisan khusus (4 proses).
Lapisannya juga diubah dari 4 menjadi 5μ menjadi 10μ sehingga sulit terkelupas dan berkarat serta permukaannya sendiri halus ..
Anda dapat menambah jumlah model kendaraan jika Anda menggunakan sekrup di kedua ujungnya, tetapi kekuatannya tidak sekuat yang seharusnya ..
Oleh karena itu, kami berpegang pada proses pencetakan yang terintegrasi sepenuhnya dan menggunakan mur hanya pada satu sisi ..
ZRX1100 / 1200'08, ZZR1100, ZX-14R (Typeb) adalah spesifikasi hollow karena memiliki ketebalan.
Silakan ambil di tangan Anda dan rasakan teksturnya ..
Bagus has completed the chromoly front axle shaft.
The front axle shaft is the only thing that transmits the movement of the front fork to the tire.
It is a very important place, although it is difficult to feel.
This is a place where strength is required to transmit the correct force, but wishing to keep the unsprung weight as light as possible.
If so, titanium is the good choice to make it, but it is said that titanium shafts break, and the use of titanium shafts is still prohibited by race regulations.
The answer by Bagus! was to use chrome-moly SCM-440 tempered wood for the complete one-piece molding!
Material: SCM-440 material.
The tempered material is the best material of chromoly with molecularly uniform grain.
Therefore, it is strong and resistant to heat and distortion.
This can be exited with a hex, making it lighter!
The manufacturing process does not end with processing and coating.
Four processes: Machining - Heat treatment - re-polishing (to correct distortions caused by heat treatment) - Special coating with a single wall thickness of 10 μ.
The coating is usually 4 to 5 microns, but Bagus! Motor Cycle made it 10 microns, so it is hard to peel off and rust, and its own surface is smooth.
Also, if both ends are screwed, the number of compatible models will increase, but the essential strength will be lost.
Therefore, the nut is used only on one side.
ZRX1100/1200 '08 and ZZR1100 are hollow specs because of their thickness
Please feel the texture in your hand.
Bagus sudah menyelesaikan poros roda depan chrome-molly ..
Poros poros depan adalah satu-satunya yang mentransmisikan pergerakan garpu depan ke ban, yang bergerak sedikit ke setiap arah ..
Sulit untuk dirasakan, tapi ini tempat yang sangat penting ..
Kami ingin menjaga beban yang belum dipangkas seringan mungkin ..
Namun, konon poros titanium bisa saja retak, dan penggunaan poros titanium tetap dilarang oleh peraturan balap ..
Jawaban Bagus! Adalah cetakan monoblok lengkap dari kayu temper SCM-440 chromoly!
Bahan: Kayu temper SCM-440.
Finisher adalah bahan terbaik dalam chromolytic molybdenum yang memiliki ukuran butir yang seragam secara molekuler.
Ini membuatnya kuat dan tahan panas serta tahan terhadap distorsi ..
Ini adalah cara yang bagus untuk menghemat berat karena Anda bisa keluar dengan kutukan!
Proses pembuatan tidak berakhir dengan pemrosesan dan pelapisan.
Pemesinan & rarr; perlakuan panas & rarr; menyesali (untuk memperbaiki distorsi yang dibuat oleh perlakuan panas) & rarr; satu potong 10 & mu; lapisan khusus (4 proses).
Lapisannya juga diubah dari 4 menjadi 5μ menjadi 10μ sehingga sulit terkelupas dan berkarat serta permukaannya sendiri halus ..
Anda dapat menambah jumlah model kendaraan jika Anda menggunakan sekrup di kedua ujungnya, tetapi kekuatannya tidak sekuat yang seharusnya ..
Oleh karena itu, kami berpegang pada proses pencetakan yang terintegrasi sepenuhnya dan menggunakan mur hanya pada satu sisi ..
ZRX1100 / 1200'08, ZZR1100, ZX-14R (Typeb) adalah spesifikasi hollow karena memiliki ketebalan.
Silakan ambil di tangan Anda dan rasakan teksturnya ..
Bagus has completed the chromoly front axle shaft.
The front axle shaft is the only thing that transmits the movement of the front fork to the tire.
It is a very important place, although it is difficult to feel.
This is a place where strength is required to transmit the correct force, but wishing to keep the unsprung weight as light as possible.
If so, titanium is the good choice to make it, but it is said that titanium shafts break, and the use of titanium shafts is still prohibited by race regulations.
The answer by Bagus! was to use chrome-moly SCM-440 tempered wood for the complete one-piece molding!
Material: SCM-440 material.
The tempered material is the best material of chromoly with molecularly uniform grain.
Therefore, it is strong and resistant to heat and distortion.
This can be exited with a hex, making it lighter!
The manufacturing process does not end with processing and coating.
Four processes: Machining - Heat treatment - re-polishing (to correct distortions caused by heat treatment) - Special coating with a single wall thickness of 10 μ.
The coating is usually 4 to 5 microns, but Bagus! Motor Cycle made it 10 microns, so it is hard to peel off and rust, and its own surface is smooth.
Also, if both ends are screwed, the number of compatible models will increase, but the essential strength will be lost.
Therefore, the nut is used only on one side.
ZRX1100/1200 '08 and ZZR1100 are hollow specs because of their thickness
Please feel the texture in your hand.
Catatan
Klik di sini untuk Tipe-A
Type-A is here
Model yang Sesuai
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/