- Beranda
- Motor
- HONDA 0 - 50cc
- MONKEY
- Sparepart Motor
- Rem
- Sparepart Rem Lainnya
- GM-MOTO
- GM-MOTO: Spacer Off-set Piringan Cakram
Spacer Off-set Piringan Cakram
- Nomor produk: mky-20005-8
-
- IN STOCK
- Out Stock
- GM-MOTO
- |
- 0.0
- (0 ulasan)
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Bahan: Aluminium (2017S Duralumin)
Baut PCD: 66mm
Termasuk juga: Baut M8 panjang x3pcs.
Asal negara: Japan Material: Aluminum Solid Wood (2017S Duralumin)
Bolt PCD: 66mm
Included Parts: M8 Long Bolt x3pcs.
Country of Origin: Japan
Baut PCD: 66mm
Termasuk juga: Baut M8 panjang x3pcs.
Asal negara: Japan Material: Aluminum Solid Wood (2017S Duralumin)
Bolt PCD: 66mm
Included Parts: M8 Long Bolt x3pcs.
Country of Origin: Japan
[Deskripsi]
Ini mengimbangi rotor cakram ke luar!
Ini digunakan saat memasang roda TL 8 inci yang diukir pada kit garpu tipe asli dengan cakram hidrolik.
Kaliper rem bersentuhan karena ketebalan material roda cukur tebal.
Itu terbuat dari aluminium padat (2017S Duralumin) untuk mengatasi masalah ini.
Selain itu, tidak ada tempat penggunaan khusus, tapi saya buat juga untuk bagian belakang.
Depan : Diameter Luar Φ90.0mm, Diameter Dalam Φ43.5mm, Tebal 8mm
Depan : Diameter Luar Φ90.0mm, Diameter Dalam Φ43.5mm, Tebal 10mm
Belakang : Diameter Luar Φ85.0mm, Diameter Dalam Φ40.0mm, Tebal 8mm Untuk belakang : Diameter Luar Φ85.0mm, Diameter Dalam Φ40.0mm, Tebal 10mm
Semua PCD Bolt berukuran 66mm
Silakan gunakan saat "Saya akan masuk sedikit lagi!"
Kaliper tidak dapat dipasang tanpa spacer, tetapi dapat dipasang dengan rapi dengan memasang spacer. Offset the disc rotor to the outside!
For use with stock type fork kit with hydraulic discs and machined 8" TL wheels.
Since a machined wheel has a thicker material, the brake caliper will come in contact with it.
To solve this problem, a solid aluminum material is machined (2017S Duralumin).
GM-MOTO has also made a rear version, although there is no specific use.
For Front: Outer diameter Φ90.0mm, inner diameter Φ43.5mm, thickness 8mm
For Front: Outer diameter Φ90.0mm, inner diameter Φ43.5mm, thickness 10mm
For rear: Outer diameter Φ85.0mm, inner diameter Φ40.0mm, thickness 8mm
For rear: Outer diameter Φ85.0mm, inner diameter Φ40.0mm, thickness 10mm
PCD of all bolts is 66mm
It's almost there!Use it as.
Without the spacer, the caliper cannot be installed, but with the spacer, it can be installed clearly.
Ini digunakan saat memasang roda TL 8 inci yang diukir pada kit garpu tipe asli dengan cakram hidrolik.
Kaliper rem bersentuhan karena ketebalan material roda cukur tebal.
Itu terbuat dari aluminium padat (2017S Duralumin) untuk mengatasi masalah ini.
Selain itu, tidak ada tempat penggunaan khusus, tapi saya buat juga untuk bagian belakang.
Depan : Diameter Luar Φ90.0mm, Diameter Dalam Φ43.5mm, Tebal 8mm
Depan : Diameter Luar Φ90.0mm, Diameter Dalam Φ43.5mm, Tebal 10mm
Belakang : Diameter Luar Φ85.0mm, Diameter Dalam Φ40.0mm, Tebal 8mm Untuk belakang : Diameter Luar Φ85.0mm, Diameter Dalam Φ40.0mm, Tebal 10mm
Semua PCD Bolt berukuran 66mm
Silakan gunakan saat "Saya akan masuk sedikit lagi!"
Kaliper tidak dapat dipasang tanpa spacer, tetapi dapat dipasang dengan rapi dengan memasang spacer. Offset the disc rotor to the outside!
For use with stock type fork kit with hydraulic discs and machined 8" TL wheels.
Since a machined wheel has a thicker material, the brake caliper will come in contact with it.
To solve this problem, a solid aluminum material is machined (2017S Duralumin).
GM-MOTO has also made a rear version, although there is no specific use.
For Front: Outer diameter Φ90.0mm, inner diameter Φ43.5mm, thickness 8mm
For Front: Outer diameter Φ90.0mm, inner diameter Φ43.5mm, thickness 10mm
For rear: Outer diameter Φ85.0mm, inner diameter Φ40.0mm, thickness 8mm
For rear: Outer diameter Φ85.0mm, inner diameter Φ40.0mm, thickness 10mm
PCD of all bolts is 66mm
It's almost there!Use it as.
Without the spacer, the caliper cannot be installed, but with the spacer, it can be installed clearly.
Peringatan
*Harap pastikan untuk melakukan pekerjaan perakitan karena suku cadang keamanan yang penting telah diganti.
*Kami tidak memoles setelah pengerjaan.
*Harap lakukan pekerjaan pemolesan (oleh pelanggan) dalam kasus itu membutuhkan glossy.
*Ada kasus dimana goresan kecil dan goresan gesekan akan terjadi saat pengiriman.
*Ini akan tidak masuk dalam garansi kecuali untuk kerusakan yang signifikan merusak nilai atau fungsi produk. [Notes on purchase]
*All GM-MOTO products are custom parts.Since these products are set up in response to the requests of heavy users, there may be parts of the product that change or decrease from the original driving performance.Please use as dress-up parts for show model machines.Therefore, it is not suitable for driving on public roads or tracks.In some cases, it may not be possible to mount the unit on a motorcycle, or adjustments and modifications may be required in various areas.
※ Because this is a change in an important safety part, be sure to perform the assembly work properly.
*Polishing is not performed after machining.
※ If you need to polish the surface, please do it by yourself.
*Because it is made overseas, the molding, welding, painting, etc. may be insufficient.There may be some minor scratches and scuffs due to transportation problems.
*There may be changes in product specifications due to the manufacturer's reasons.
*Kami tidak memoles setelah pengerjaan.
*Harap lakukan pekerjaan pemolesan (oleh pelanggan) dalam kasus itu membutuhkan glossy.
*Ada kasus dimana goresan kecil dan goresan gesekan akan terjadi saat pengiriman.
*Ini akan tidak masuk dalam garansi kecuali untuk kerusakan yang signifikan merusak nilai atau fungsi produk. [Notes on purchase]
*All GM-MOTO products are custom parts.Since these products are set up in response to the requests of heavy users, there may be parts of the product that change or decrease from the original driving performance.Please use as dress-up parts for show model machines.Therefore, it is not suitable for driving on public roads or tracks.In some cases, it may not be possible to mount the unit on a motorcycle, or adjustments and modifications may be required in various areas.
※ Because this is a change in an important safety part, be sure to perform the assembly work properly.
*Polishing is not performed after machining.
※ If you need to polish the surface, please do it by yourself.
*Because it is made overseas, the molding, welding, painting, etc. may be insufficient.There may be some minor scratches and scuffs due to transportation problems.
*There may be changes in product specifications due to the manufacturer's reasons.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/