- Beranda
- Motor
- KAWASAKI 251 - 400cc
- Z400FX
- Sparepart Motor
- Rem
- Dudukan Kaliper Rem
- SPEED SHOP ITO
- SPEED SHOP ITO: Dukungan Kaliper Belakang untuk Z400FX E4/CP2696
Dukungan Kaliper Belakang untuk Z400FX E4/CP2696
- Nomor produk: W-1702-P34803153
-
- IN STOCK
- Out Stock
- SPEED SHOP ITO
- |
- 0.0
- (0 ulasan)
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
SUNSTAR 270mm rotor
Dukungan caliper belakang atas untuk Z400FX E4
Kompatibel dengan CP2696 ■Sunstar 270mm rotors
■Upper side rear caliper support for Z400FX E4
■Compatible with CP2696
Dukungan caliper belakang atas untuk Z400FX E4
Kompatibel dengan CP2696 ■Sunstar 270mm rotors
■Upper side rear caliper support for Z400FX E4
■Compatible with CP2696
[Deskripsi]
This product is compatible with stock wheels, Sunstar 270mm rotors, and stock swingarm.
This product is compatible with stock wheels, Sunstar 270mm rotors, and stock swingarm.
Peringatan
* Ini tidak kompatibel dengan roda lebar eksternal. (Roda yang sesuai dengan stok dapat digunakan.)
*Karena batang torsi standar digunakan, ban dan batang torsi akan bersentuhan dengan roda lebar luar.
* Dimungkinkan untuk menginstal dengan memodifikasi batang torsi stok.
*Swingarms eksternal tidak dapat dipasang tanpa pemegang batang torsi stok.
*Untuk baut pengencang batang torsi, harap potong pelat persegi di sisi belakang untuk menentukan sudut mur dan masukkan baut stok dari sisi depan.
*Ada kasus di mana spesifikasi produk diubah oleh kenyamanan pabrikan. *Not compatible with aftermarket wide wheels.(Wheels that are similar to the stock can be used)
*Because the stock torque rod is used, the torque rod will come in contact with the tire on aftermarket wide wheels.
*It can be installed by modifying the stock torque rod.
*The aftermarket swingarm cannot be installed without the stock torque rod support.
*For the torque rod fixing bolt, please cut off the square plate for setting the nut angle on the back side, and insert the stock bolt from the front side.
*There may be changes in product specifications due to the manufacturer's reasons.
*Karena batang torsi standar digunakan, ban dan batang torsi akan bersentuhan dengan roda lebar luar.
* Dimungkinkan untuk menginstal dengan memodifikasi batang torsi stok.
*Swingarms eksternal tidak dapat dipasang tanpa pemegang batang torsi stok.
*Untuk baut pengencang batang torsi, harap potong pelat persegi di sisi belakang untuk menentukan sudut mur dan masukkan baut stok dari sisi depan.
*Ada kasus di mana spesifikasi produk diubah oleh kenyamanan pabrikan. *Not compatible with aftermarket wide wheels.(Wheels that are similar to the stock can be used)
*Because the stock torque rod is used, the torque rod will come in contact with the tire on aftermarket wide wheels.
*It can be installed by modifying the stock torque rod.
*The aftermarket swingarm cannot be installed without the stock torque rod support.
*For the torque rod fixing bolt, please cut off the square plate for setting the nut angle on the back side, and insert the stock bolt from the front side.
*There may be changes in product specifications due to the manufacturer's reasons.
Model yang Sesuai
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/