- Beranda
- Motor
- HONDA 51 - 125cc
- 125T
- Sparepart Motor
- Sparepart Mesin
- Sparepart Intake
- Insulator/Manifold
- ATop
- ATop: Sendi Karburator untuk Karburatorisasi Tunggal
Sendi Karburator untuk Karburatorisasi Tunggal
- Nomor produk: t-cb125t-scbk
-
- IN STOCK
- Out Stock
- ATop
- |
- 0.0
- (0 ulasan)
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Baut-ke-Pitch untuk fiksasi Karburator: 47.5mm
Diameter dalam sisi karburator: 25.5mm
Diameter dalam sisi mesin: 22mm Pitch between bolts for fixing carburetor: 47.5mm
Carburetor side bore diameter: 25.5mm
Engine side inner diameter: 22mm
Diameter dalam sisi karburator: 25.5mm
Diameter dalam sisi mesin: 22mm Pitch between bolts for fixing carburetor: 47.5mm
Carburetor side bore diameter: 25.5mm
Engine side inner diameter: 22mm
[Deskripsi]
Dengan kit ini, Anda dapat mengubah CB125T Anda menjadi karburator tunggal!.
Sangat mudah digunakan, karena tidak perlu sinkronisasi overhaul karburator..
Jenis karburator yang dipasang dengan baut stud, seperti karburator VM Mikuni, dapat digunakan..
Jika Anda menggunakan karburator yang dicolokkan ke indikator seperti karburator PWK, Anda memerlukan sambungan terpisah.. With this kit, you can convert your CB125T to a single carburetor.
This makes the carburetor much easier to handle, as it eliminates the need for tuning when overhauling the carburetor.
You can use a carburetor that is fixed with stud bolts, such as Mikuni VM carburetor.
If you are using a carburetor that is inserted into an insulator, such as the PWK carburetor, you will need a separate joint.
Sangat mudah digunakan, karena tidak perlu sinkronisasi overhaul karburator..
Jenis karburator yang dipasang dengan baut stud, seperti karburator VM Mikuni, dapat digunakan..
Jika Anda menggunakan karburator yang dicolokkan ke indikator seperti karburator PWK, Anda memerlukan sambungan terpisah.. With this kit, you can convert your CB125T to a single carburetor.
This makes the carburetor much easier to handle, as it eliminates the need for tuning when overhauling the carburetor.
You can use a carburetor that is fixed with stud bolts, such as Mikuni VM carburetor.
If you are using a carburetor that is inserted into an insulator, such as the PWK carburetor, you will need a separate joint.
Peringatan
* Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan pabrikan.
*There may be changes in product specifications due to the manufacturer's reasons.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/