- Beranda
- Motor
- HONDA 126 - 250cc
- Rebel 250
- Sparepart Motor
- Kelistrikan
- Indikator / Alat Ukur
- Speedometer
- SP Takegawa
- SP Takegawa: Speed Meter Controller SM-CON
Speed Meter Controller SM-CON
- Nomor produk: 05-06-0041
-
- IN STOCK
- Out Stock
- SP Takegawa
- |
- 4.0
- (1 ulasan)
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
[Deskripsi]
Produk ini mengoreksi penyimpangan tampilan kecepatan saat merek ban atau ukuran ban diubah, atau saat sproket diganti, dan dapat menampilkan kecepatan secara akurat.
Ini dapat dipasang pada kendaraan dengan coupler-on tanpa pekerjaan kabel karena dilengkapi dengan harness untuk kendaraan.
Semua pengaturan dilakukan menggunakan smartphone atau tablet, dan jumlah sprocket dan diameter ban dimasukkan secara numerik.
Karena smartphone atau tablet terhubung ke unit ini melalui komunikasi Bluetooth, tidak perlu melepas bagian luar setiap kali Anda ingin mengubah pengaturan.
Tampilan kecepatan dan koreksi kesalahan setelah penggantian gigi/tanpa penggantian gigi (Lihat gambar)
Kecepatan saat ini (setelah perubahan GEAR)
Tampilan kecepatan yang dikoreksi (kecepatan saat ini) saat sproket depan (Drive Sproket) , Sproket Belakang (Drive Sproket) , diameter luar Ban belakang (Diameter ban) (mm) , dan nomor gigi gigi sensor diubah dari nilai normal (spesifikasi stok) dan mengatur.
Kecepatan (tidak dimodifikasi)
Masukan nilai saham (diameter luar ban depan/belakang/ban belakang (mm) / nomor gigi gigi sensor) Kecepatan nilai stok ditampilkan.
Ini adalah kecepatan di mana tidak ada yang dimodifikasi. (Anda dapat melihat kecepatan setelah mengganti suku cadang dan sebelum mengganti suku cadang.)
Koreksi kesalahan speedometer asli
Speedometer bawaan akan menampilkan kecepatan yang lebih tinggi dari kecepatan sebenarnya.
Oleh karena itu, jika Anda menggunakan alat ukur yang tidak asli seperti GPS, tampilan kecepatan akan berbeda dengan speedometer asli.
Dengan menginstal produk ini, kesalahan tampilan kecepatan dapat diperbaiki dan tampilan kecepatan yang sebenarnya menjadi mungkin.
Untuk kendaraan dengan ABS, rentang koreksi terbatas.
Jika rentang koreksi yang ditentukan terlampaui, kode kesalahan ABS akan ditampilkan.
Silakan merujuk ke instruksi manual untuk pengaturan.
Tampilan kecepatan maksimum dan pengukuran Waktu 0-60 Km/h (Lihat gambar)
Kecepatan maksimum
Fungsi ini tidak boleh digunakan di jalan umum.
0Km/h→300Km/h dapat diukur, dan kecepatan maksimum diperbarui setiap saat dan ditampilkan pada perangkat smartphone atau tablet.
Kecepatan maksimum akan diatur ulang saat Anda memutuskan sambungan aplikasi (tombol MATI) dan sambungkan kembali.
Jika Anda ingin menyimpan catatan, silakan gunakan tangkapan layar ponsel pintar atau perangkat tablet Anda.
0-60Km / jam Pengukuran waktu
Harap ikuti batas kecepatan yang sah.
Dimungkinkan untuk mengukur waktu dari 0 hingga 60 km/jam.
Pengukuran otomatis saat Anda mulai berlari. (Pengukuran dimungkinkan hingga 100 menit.)
Waktu 0-60Km/jam akan diatur ulang saat Anda memutuskan dan menyambungkan kembali aplikasi.
Jika Anda ingin menyimpan catatan, silakan gunakan fungsi tangkapan layar perangkat ponsel cerdas atau tablet Anda.
Tampilan input nilai asli dan input nilai perubahan spesifikasi (lihat gambar)
Masukan nilai asli
Masukkan spesifikasi asli (diameter luar ban depan/belakang/ban belakang (mm) / nomor gigi gigi sensor) kendaraan tempat produk ini akan dipasang.
Ubah masukan nilai
Setelah memasukkan nilai stok kendaraan tempat produk ini akan dipasang, ketuk "+" dan "-" untuk mengganti sproket depan (Drive Sproket) , Sproket Belakang (Drive Sproket) , diameter luar Ban belakang (diameter ban) (mm) , dan jumlah gigi roda gigi sensor, lalu buat pengaturannya.
This product corrects the deviation of the speed display when the tire brand or tire size is changed, or when the sprocket is changed, and can display the speed accurately.
It can be installed on the vehicle by coupler-on without any wiring work because it comes with a harness for the vehicle.
All settings are made using a smartphone or tablet, and the number of sprocket teeth and tire diameter are entered numerically.
Since the smartphone or tablet is connected to this unit via Bluetooth communication, there is no need to remove the exterior every time you want to change the settings.
■Display of speed and error correction after gear change / without gear change (see image)
・Current speed (after gear change)
Corrected speed display (current speed) when front sprocket (drive sprocket), rear sprocket (drive sprocket), rear tire outer diameter (tire diameter) (mm), and sensor gear tooth number are changed from the stock value (stock specification) and set.
・Speed (unmodified)
Input of stock value (front / rear sprocket / rear tire outer diameter (mm) / sensor gear tooth number) The speed of the stock value is displayed.
This is the speed at which nothing has been modified.(You can see the speed after changing the parts and before changing the parts.)
・Stock speedometer error correction
The stock speedometer will display a higher speed than the actual speed.
Therefore, if you use a non-stock measuring instrument such as GPS, the speed display will be different from the stock speedometer.
By installing this product, the error of the speed display can be corrected and the actual speed display becomes possible.
For vehicles with ABS, the correction range is limited.
If the specified correction range is exceeded, the ABS error code will be displayed.
Please refer to the instruction manual for the setting.
■Display of maximum speed and 0-60 km/h time measurement (see image)
・Maximum speed
0Km/h to 300Km/h can be measured, and the maximum speed is updated every time and displayed on a smartphone or tablet device.
The maximum speed will be reset when you disconnect the application (key OFF) and reconnect.
If you want to save the record, please use the screenshot of your smart phone or tablet device.
・0-60km/h time measurement
*Please follow the legal speed limit.
Measuring the time from 0 to 60km/h can be done.
Automatic measurement when you start riding.(Measurement is possible up to 100 minutes)
The 0-60Km/h time will be reset when you disconnect and reconnect the app.
If you want to save the record, please use the screenshot of your smart phone or tablet device.
■Display of the input of the stock value and the input of the specification change value (refer to the image)
・Stock value input
Enter the stock specifications (front / rear sprocket / rear tire outer diameter (mm) / sensor gear tooth number) of the vehicle to which this product is to be installed.
・Change value input
After entering the stock values of the vehicle in which this product is to be installed, tap "+" and "-" to change the front sprocket (drive sprocket), rear sprocket (drive sprocket), rear tire outer diameter (tire diameter) (mm), and the number of teeth of the sensor gear, and then make the settings.
Ini dapat dipasang pada kendaraan dengan coupler-on tanpa pekerjaan kabel karena dilengkapi dengan harness untuk kendaraan.
Semua pengaturan dilakukan menggunakan smartphone atau tablet, dan jumlah sprocket dan diameter ban dimasukkan secara numerik.
Karena smartphone atau tablet terhubung ke unit ini melalui komunikasi Bluetooth, tidak perlu melepas bagian luar setiap kali Anda ingin mengubah pengaturan.
Tampilan kecepatan dan koreksi kesalahan setelah penggantian gigi/tanpa penggantian gigi (Lihat gambar)
Kecepatan saat ini (setelah perubahan GEAR)
Tampilan kecepatan yang dikoreksi (kecepatan saat ini) saat sproket depan (Drive Sproket) , Sproket Belakang (Drive Sproket) , diameter luar Ban belakang (Diameter ban) (mm) , dan nomor gigi gigi sensor diubah dari nilai normal (spesifikasi stok) dan mengatur.
Kecepatan (tidak dimodifikasi)
Masukan nilai saham (diameter luar ban depan/belakang/ban belakang (mm) / nomor gigi gigi sensor) Kecepatan nilai stok ditampilkan.
Ini adalah kecepatan di mana tidak ada yang dimodifikasi. (Anda dapat melihat kecepatan setelah mengganti suku cadang dan sebelum mengganti suku cadang.)
Koreksi kesalahan speedometer asli
Speedometer bawaan akan menampilkan kecepatan yang lebih tinggi dari kecepatan sebenarnya.
Oleh karena itu, jika Anda menggunakan alat ukur yang tidak asli seperti GPS, tampilan kecepatan akan berbeda dengan speedometer asli.
Dengan menginstal produk ini, kesalahan tampilan kecepatan dapat diperbaiki dan tampilan kecepatan yang sebenarnya menjadi mungkin.
Untuk kendaraan dengan ABS, rentang koreksi terbatas.
Jika rentang koreksi yang ditentukan terlampaui, kode kesalahan ABS akan ditampilkan.
Silakan merujuk ke instruksi manual untuk pengaturan.
Tampilan kecepatan maksimum dan pengukuran Waktu 0-60 Km/h (Lihat gambar)
Kecepatan maksimum
Fungsi ini tidak boleh digunakan di jalan umum.
0Km/h→300Km/h dapat diukur, dan kecepatan maksimum diperbarui setiap saat dan ditampilkan pada perangkat smartphone atau tablet.
Kecepatan maksimum akan diatur ulang saat Anda memutuskan sambungan aplikasi (tombol MATI) dan sambungkan kembali.
Jika Anda ingin menyimpan catatan, silakan gunakan tangkapan layar ponsel pintar atau perangkat tablet Anda.
0-60Km / jam Pengukuran waktu
Harap ikuti batas kecepatan yang sah.
Dimungkinkan untuk mengukur waktu dari 0 hingga 60 km/jam.
Pengukuran otomatis saat Anda mulai berlari. (Pengukuran dimungkinkan hingga 100 menit.)
Waktu 0-60Km/jam akan diatur ulang saat Anda memutuskan dan menyambungkan kembali aplikasi.
Jika Anda ingin menyimpan catatan, silakan gunakan fungsi tangkapan layar perangkat ponsel cerdas atau tablet Anda.
Tampilan input nilai asli dan input nilai perubahan spesifikasi (lihat gambar)
Masukan nilai asli
Masukkan spesifikasi asli (diameter luar ban depan/belakang/ban belakang (mm) / nomor gigi gigi sensor) kendaraan tempat produk ini akan dipasang.
Ubah masukan nilai
Setelah memasukkan nilai stok kendaraan tempat produk ini akan dipasang, ketuk "+" dan "-" untuk mengganti sproket depan (Drive Sproket) , Sproket Belakang (Drive Sproket) , diameter luar Ban belakang (diameter ban) (mm) , dan jumlah gigi roda gigi sensor, lalu buat pengaturannya.
This product corrects the deviation of the speed display when the tire brand or tire size is changed, or when the sprocket is changed, and can display the speed accurately.
It can be installed on the vehicle by coupler-on without any wiring work because it comes with a harness for the vehicle.
All settings are made using a smartphone or tablet, and the number of sprocket teeth and tire diameter are entered numerically.
Since the smartphone or tablet is connected to this unit via Bluetooth communication, there is no need to remove the exterior every time you want to change the settings.
■Display of speed and error correction after gear change / without gear change (see image)
・Current speed (after gear change)
Corrected speed display (current speed) when front sprocket (drive sprocket), rear sprocket (drive sprocket), rear tire outer diameter (tire diameter) (mm), and sensor gear tooth number are changed from the stock value (stock specification) and set.
・Speed (unmodified)
Input of stock value (front / rear sprocket / rear tire outer diameter (mm) / sensor gear tooth number) The speed of the stock value is displayed.
This is the speed at which nothing has been modified.(You can see the speed after changing the parts and before changing the parts.)
・Stock speedometer error correction
The stock speedometer will display a higher speed than the actual speed.
Therefore, if you use a non-stock measuring instrument such as GPS, the speed display will be different from the stock speedometer.
By installing this product, the error of the speed display can be corrected and the actual speed display becomes possible.
For vehicles with ABS, the correction range is limited.
If the specified correction range is exceeded, the ABS error code will be displayed.
Please refer to the instruction manual for the setting.
■Display of maximum speed and 0-60 km/h time measurement (see image)
・Maximum speed
0Km/h to 300Km/h can be measured, and the maximum speed is updated every time and displayed on a smartphone or tablet device.
The maximum speed will be reset when you disconnect the application (key OFF) and reconnect.
If you want to save the record, please use the screenshot of your smart phone or tablet device.
・0-60km/h time measurement
*Please follow the legal speed limit.
Measuring the time from 0 to 60km/h can be done.
Automatic measurement when you start riding.(Measurement is possible up to 100 minutes)
The 0-60Km/h time will be reset when you disconnect and reconnect the app.
If you want to save the record, please use the screenshot of your smart phone or tablet device.
■Display of the input of the stock value and the input of the specification change value (refer to the image)
・Stock value input
Enter the stock specifications (front / rear sprocket / rear tire outer diameter (mm) / sensor gear tooth number) of the vehicle to which this product is to be installed.
・Change value input
After entering the stock values of the vehicle in which this product is to be installed, tap "+" and "-" to change the front sprocket (drive sprocket), rear sprocket (drive sprocket), rear tire outer diameter (tire diameter) (mm), and the number of teeth of the sensor gear, and then make the settings.
Peringatan
*Ketika mengganti ban atau ukuran ban dari aslinya, harap input informasi diameter luarnya atau ukuran bannya seperti format asli dari pabrikan.
*Anda bisa set display speedometer lebih tinggi atau rendah.
*Untuk menggunakan produk ini, Anda harus menggunakan smartphone dan tablet yang speknya sesuai. Tidak ada refund jika tidak sengaja terpencet membeli settingan di aplikasi.
*Jangan menyetting produk sambil riding.
*Foto mungkin memuat produk lain.
*Tergantung dari lot produksi, produk yang dikirimkan mungkin memiliki label lama.
*Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan produsen.
*Ketentuan pemasangan
•Untuk menggunakan speedometer controller, Anda harus memiliki smartphone dengan spek yang memenuhi syarat.
•Jika tidak maka tidak bisa memasang produk. Selain itu, perlu sambungan ke internet karena harus mengunduh software dan aplikasi. Harap dicatat bahwa aplikasi dapat berbayar.
*Tentang pemasangan Speed Meter Controller Operating
•smartphone (iOS / Android)
*Tidak bisa pakai komputer (Windows).
*Jika menggunakan iPhone 4s atau di bawahnya, iPad Gen 3 atau di bawahnya, Anda tidak akan bisa terkoneksi karena smartphone tidak mendukung koneksi Bluetooth LE.
Untuk memasang TST-CON SP Takegawa [Alat Setting TAKEGAWA] (berbayar), Anda harus tersambung ke internet.
•iOS: iOS11 ke atas
Untuk memasang aplikasi SP Takegawa danmembeli data model, harus terhubung ke AppStore.
Harap instal aplikasi SP TAKEGAWA TST-CON [Alat Setting TAKEGAWA] (berbayar) dan dan gunakan tool khusus yang ada di aplikasi.
•Android harus dengan Bluetooth bawaan version 6. 0 atau lebih baru
Untuk memasang aplikasi SP Takegawa danmembeli data model, harus terhubung ke Google Play.
Harap instal aplikasi SP TAKEGAWA TST-CON [Alat Setting TAKEGAWA] (berbayar) dan dan gunakan tool khusus yang ada di aplikasi.
*PART YANG TIDAK BOLEH DIPASANG
•Jangan dipasang dengan ignition coil, kabel busi, lampu HID atau lampu depan LED dan lampu kabut dari merk lain.
*Ballast / inverter bisa mengeluarkan voltase tinggi yang bisa memengaruhi sirkuit digital, menyebabkan produk gagal berfungsi atau rusak.
•Bisa dipasang dengan SP Takegawa Hyper Ignition Coil secara bersamaan. Jangan pakai produk ignition merk lain karena voltasenya bisa berbeda dan menyebabkan kerusakan.
•Produk ini tidak waterproof atau drip-proof. Jika terkena air (saat dicuci/hujan, dll) maka air bisa masuk dan menyebabkan konslet. *When you change the tire brand or size from the original one, please input the outside diameter size or the measurement value which is described by the tire manufacturer.
*You can increase or decrease the displayed speed, but if you set it improperly, it may cause you to be cited for overspeeding.Use on public roads at your own risk.
*In order to use this product, you will need a smartphone or tablet device that meets the following requirements.No refunds will be given for accidental app purchases.
*Do not operate or look at your smartphone / tablet device while riding.You are subject to a traffic violation.
*Images may contain other products.
*Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change.
*There may be changes in product specifications due to the manufacturer's reasons.
*Equipment and environment required for installation
・To use the speedometer controller, you will need a smartphone or tablet that meets the following requirements.
・If you do not have the following requirements, you will not be able to use this product.Also, you need to be connected to the Internet to download the application.
・You have to pay for the app.
*Speed Meter Controller Operating Environment
・Smartphones (iOS / Andoroid only)
*PC (Windows) cannot be used.
*If you are using an iPhone 4s or earlier, or an iPad 3rd generation or earlier, you will not be able to connect even if the OS has been upgraded because it does not support Bluetooth LE.
To install the SP Takegawa application TST-CON [TAKEGAWA Setting Tool] (fee-based), you need to be connected to the Internet.
・iOS: iOS11 and above
To install SP Takegawa app and purchase model data, you need to connect to AppStore.
Please install SP TAKEGAWA application TST-CON [TAKEGAWA setting tool] (paid) and use the dedicated tool in the application.
・Andoroid Andoroid terminal Built-in Bluetooth version 6.0 or higher
To install SP Takegawa app and purchase model data, you need to connect to Google play.
Please install SP TAKEGAWA application TST-CON [TAKEGAWA setting tool] (paid) and use the dedicated tool in the application.
*About the parts that cannot be used together
・Do not install SP Takegawa's H.I.D kit or LED lamps (fog/headlights) at the same time, as the ballast/inverter (voltage converter) may generate high-voltage noise that may adversely affect the digital circuitry, causing product failure or malfunction.
・Do not use aftermarket ignition devices (ignition coils or plug cords) other than those of SP Takegawa because they may cause malfunctions or product failure due to increased radiation noise caused by increased ignition voltage.
・It is possible to use with SP Takekawa Hyper Ignition Coil at the same time.Do not use SP Takegawa's aftermarket power generation equipment as it may cause failure due to insufficient power generation or difference in voltage waveform.
・This product is not waterproof or drip-proof.If the unit is exposed to rain or water, there is a possibility that water will enter the unit and cause it to malfunction.
*Anda bisa set display speedometer lebih tinggi atau rendah.
*Untuk menggunakan produk ini, Anda harus menggunakan smartphone dan tablet yang speknya sesuai. Tidak ada refund jika tidak sengaja terpencet membeli settingan di aplikasi.
*Jangan menyetting produk sambil riding.
*Foto mungkin memuat produk lain.
*Tergantung dari lot produksi, produk yang dikirimkan mungkin memiliki label lama.
*Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan produsen.
*Ketentuan pemasangan
•Untuk menggunakan speedometer controller, Anda harus memiliki smartphone dengan spek yang memenuhi syarat.
•Jika tidak maka tidak bisa memasang produk. Selain itu, perlu sambungan ke internet karena harus mengunduh software dan aplikasi. Harap dicatat bahwa aplikasi dapat berbayar.
*Tentang pemasangan Speed Meter Controller Operating
•smartphone (iOS / Android)
*Tidak bisa pakai komputer (Windows).
*Jika menggunakan iPhone 4s atau di bawahnya, iPad Gen 3 atau di bawahnya, Anda tidak akan bisa terkoneksi karena smartphone tidak mendukung koneksi Bluetooth LE.
Untuk memasang TST-CON SP Takegawa [Alat Setting TAKEGAWA] (berbayar), Anda harus tersambung ke internet.
•iOS: iOS11 ke atas
Untuk memasang aplikasi SP Takegawa danmembeli data model, harus terhubung ke AppStore.
Harap instal aplikasi SP TAKEGAWA TST-CON [Alat Setting TAKEGAWA] (berbayar) dan dan gunakan tool khusus yang ada di aplikasi.
•Android harus dengan Bluetooth bawaan version 6. 0 atau lebih baru
Untuk memasang aplikasi SP Takegawa danmembeli data model, harus terhubung ke Google Play.
Harap instal aplikasi SP TAKEGAWA TST-CON [Alat Setting TAKEGAWA] (berbayar) dan dan gunakan tool khusus yang ada di aplikasi.
*PART YANG TIDAK BOLEH DIPASANG
•Jangan dipasang dengan ignition coil, kabel busi, lampu HID atau lampu depan LED dan lampu kabut dari merk lain.
*Ballast / inverter bisa mengeluarkan voltase tinggi yang bisa memengaruhi sirkuit digital, menyebabkan produk gagal berfungsi atau rusak.
•Bisa dipasang dengan SP Takegawa Hyper Ignition Coil secara bersamaan. Jangan pakai produk ignition merk lain karena voltasenya bisa berbeda dan menyebabkan kerusakan.
•Produk ini tidak waterproof atau drip-proof. Jika terkena air (saat dicuci/hujan, dll) maka air bisa masuk dan menyebabkan konslet. *When you change the tire brand or size from the original one, please input the outside diameter size or the measurement value which is described by the tire manufacturer.
*You can increase or decrease the displayed speed, but if you set it improperly, it may cause you to be cited for overspeeding.Use on public roads at your own risk.
*In order to use this product, you will need a smartphone or tablet device that meets the following requirements.No refunds will be given for accidental app purchases.
*Do not operate or look at your smartphone / tablet device while riding.You are subject to a traffic violation.
*Images may contain other products.
*Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change.
*There may be changes in product specifications due to the manufacturer's reasons.
*Equipment and environment required for installation
・To use the speedometer controller, you will need a smartphone or tablet that meets the following requirements.
・If you do not have the following requirements, you will not be able to use this product.Also, you need to be connected to the Internet to download the application.
・You have to pay for the app.
*Speed Meter Controller Operating Environment
・Smartphones (iOS / Andoroid only)
*PC (Windows) cannot be used.
*If you are using an iPhone 4s or earlier, or an iPad 3rd generation or earlier, you will not be able to connect even if the OS has been upgraded because it does not support Bluetooth LE.
To install the SP Takegawa application TST-CON [TAKEGAWA Setting Tool] (fee-based), you need to be connected to the Internet.
・iOS: iOS11 and above
To install SP Takegawa app and purchase model data, you need to connect to AppStore.
Please install SP TAKEGAWA application TST-CON [TAKEGAWA setting tool] (paid) and use the dedicated tool in the application.
・Andoroid Andoroid terminal Built-in Bluetooth version 6.0 or higher
To install SP Takegawa app and purchase model data, you need to connect to Google play.
Please install SP TAKEGAWA application TST-CON [TAKEGAWA setting tool] (paid) and use the dedicated tool in the application.
*About the parts that cannot be used together
・Do not install SP Takegawa's H.I.D kit or LED lamps (fog/headlights) at the same time, as the ballast/inverter (voltage converter) may generate high-voltage noise that may adversely affect the digital circuitry, causing product failure or malfunction.
・Do not use aftermarket ignition devices (ignition coils or plug cords) other than those of SP Takegawa because they may cause malfunctions or product failure due to increased radiation noise caused by increased ignition voltage.
・It is possible to use with SP Takekawa Hyper Ignition Coil at the same time.Do not use SP Takegawa's aftermarket power generation equipment as it may cause failure due to insufficient power generation or difference in voltage waveform.
・This product is not waterproof or drip-proof.If the unit is exposed to rain or water, there is a possibility that water will enter the unit and cause it to malfunction.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/