- Beranda
- Motor
- HONDA 0 - 50cc
- DAX ST50
- Sparepart Motor
- Suspensi / Rearset / Velg / Swingarm
- Suspensi / Shock Belakang
- Shock Depan
- GM-MOTO
- GM-MOTO: Shock Depan USD KEPSPEED
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Set shock depan upside down 45mm
Dengan cover luar, komstir atas dan bawah untuk rangka DAX san Chaly (untuk beberapa frame ada peringatan, harap cek di bawah). Plat untuk kunci stang asli sudah terpasang
Dengan as shock (sudah terpasang)
As roda panjang 255mm (sudah terpasang)
Gear speedometer (untuk 10 inci) (sudah terpasang)
Hub cakram MONKEY (sudah terpasang)
Spacer offset sudah terpasang
Collar setelan sudah terpasang
Master silinder rem dan kaliper 2POD single push
Piringan cakram wave #&934;187
Kabel speedo 74cm
Panjang shock: 605mm (dari bracket atas segitiga ke tengah as roda) (OEM): 600mm)
Drat shock: 198mm (tengah ke tengah)(OEM +30mm)
Warna luar: Black anodized/Silver anodized
Dengan piringan kopling hidrolik
Negara asal: CHINA
Manufaktur: KEPSPEED 45mm diameter inverted CustomFront fork set
45Outer (already installed), upper and lower Stem bearing & Race for DAX and Sha Lee frame (already installed/some frames have precautions, see "Installation" below) Plate for original handle lock (already installed)
Special Inner Tube (already built in)
L=255mm Axle Shaft (already installed)
Meter gear (for 10-inches) (already assembled)
Disc Hub for MONKEY (already installed)
Disk Rotor Offset Spacer for exclusive use (already installed)
Adjustment Collar (already installed)
■ exclusive Brake master cylinder & single push 2PODBrake Caliper
Dedicated Φ187 Wave Disc Rotor
■74cm square-Square TypeMeter cable
■Fork length:605mm(Stem topBracket top to Axle Shaft center)(OEM):600mm)
Fork pitch:198mm(core-to-core)(OEM value +30mm)
■Outer Color:Black anodized/Silver anodized
■With hydraulic disc brake
Country of origin:CHINA
■Production Company:KEPSPEED
Dengan cover luar, komstir atas dan bawah untuk rangka DAX san Chaly (untuk beberapa frame ada peringatan, harap cek di bawah). Plat untuk kunci stang asli sudah terpasang
Dengan as shock (sudah terpasang)
As roda panjang 255mm (sudah terpasang)
Gear speedometer (untuk 10 inci) (sudah terpasang)
Hub cakram MONKEY (sudah terpasang)
Spacer offset sudah terpasang
Collar setelan sudah terpasang
Master silinder rem dan kaliper 2POD single push
Piringan cakram wave #&934;187
Kabel speedo 74cm
Panjang shock: 605mm (dari bracket atas segitiga ke tengah as roda) (OEM): 600mm)
Drat shock: 198mm (tengah ke tengah)(OEM +30mm)
Warna luar: Black anodized/Silver anodized
Dengan piringan kopling hidrolik
Negara asal: CHINA
Manufaktur: KEPSPEED 45mm diameter inverted CustomFront fork set
45Outer (already installed), upper and lower Stem bearing & Race for DAX and Sha Lee frame (already installed/some frames have precautions, see "Installation" below) Plate for original handle lock (already installed)
Special Inner Tube (already built in)
L=255mm Axle Shaft (already installed)
Meter gear (for 10-inches) (already assembled)
Disc Hub for MONKEY (already installed)
Disk Rotor Offset Spacer for exclusive use (already installed)
Adjustment Collar (already installed)
■ exclusive Brake master cylinder & single push 2PODBrake Caliper
Dedicated Φ187 Wave Disc Rotor
■74cm square-Square TypeMeter cable
■Fork length:605mm(Stem topBracket top to Axle Shaft center)(OEM):600mm)
Fork pitch:198mm(core-to-core)(OEM value +30mm)
■Outer Color:Black anodized/Silver anodized
■With hydraulic disc brake
Country of origin:CHINA
■Production Company:KEPSPEED
[Deskripsi]
KEPSPEED telah memasuki garpu depan!
Luar ekstra tebal dengan diameter luar 45mm dengan kekuatan berdebar!
Suspensi bagian dalam juga super tebal! Diameter luar 33mm!
Kendaraan tangguh dapat dengan mudah dibuat!
Silakan coba garpu depan kelas MONSTER S2 ini! KEPSPEED expands into front forks!!!
The extra-thick outer of 45mm in outer diameter with thumping power!
And the inner suspension is super fat!Outer diameter 33mm !
You can easily make a heavy-duty bike!
You really need to try these monster front forks!!!
Luar ekstra tebal dengan diameter luar 45mm dengan kekuatan berdebar!
Suspensi bagian dalam juga super tebal! Diameter luar 33mm!
Kendaraan tangguh dapat dengan mudah dibuat!
Silakan coba garpu depan kelas MONSTER S2 ini! KEPSPEED expands into front forks!!!
The extra-thick outer of 45mm in outer diameter with thumping power!
And the inner suspension is super fat!Outer diameter 33mm !
You can easily make a heavy-duty bike!
You really need to try these monster front forks!!!
Peringatan
*Jika Anda menggunakan plat kunci stang, perlu modifikasi rangka. Plat kunci stang asli tidak bisa dipakai.
*Ada kemungkinan sedikit perubahan pada spek komponennya.
*Saat dipasang di Dax, harap lepas stopper stang. Tidak semua tahun Dax segitiganya sama, mungkin saja panjangnya berbeda dan bisa menyebabkan produk ini tidak bisa dipakai.
*Panjang segitiga ini 230mm dan diameter 200mm dari bagian atas bracket bawah ke bagian bawah bracket atas dengan mur segitiga diameter 23 terpasang. Silakan cek tahun motor dan panjang segitiga.
*Silakan pasang ke mekanik atau bengkel profesional.
*Silakan lakukan penyesuaian saat pemasangan.
*Kesesuaian dengan produk merk lain tidak bisa kami konfirmasi.
*Bracket lampu sein dan lampu depan tidak termasuk.
*Velg didasarkan pada hub Monkey, jadi pakai jari-jari Monkey. Velg juga harus disejajarkan sesuai dengan velg yang dipakai.
*Foto produk sudah semirip mungkin dengan aslinya tapi mungkin akan ada sedikit perubahan spek.
*Beberapa saat setelah dipakai pertama kali cek apakah produk kendor
*Mungkin ada sedikit goresan karena proses pengiriman.
*Kami tidak menerima pengembalian jika bukan karena produk cacat sedari awal. Kesalahan pemasangan bukan tanggung jawab kami.
*Foto mungkin memuat produk dalam warna lain.
*Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan produsen. [Notes on purchase]
*All GM-MOTO products are custom parts.Since these products are set up in response to the requests of heavy users, there may be parts of the product that change or decrease from the original driving performance.Please use as dress-up parts for show model machines.Therefore, it is not suitable for driving on public roads or tracks.In some cases, it may not be possible to mount the unit on a motorcycle, or adjustments and modifications may be required in various areas.
*If the original handle lock plate is used, modification to the frame is required.Stock handle locks cannot be used.
*Please note that there may be slight specification changes in each part.In such a case, the actual item will be given priority, although it may differ from the image shown in the introduction.
*When installing on Dax, please remove the handle stopper.In the case of Dax, it is not available for all years.Depending on the model year, the stem may not be long enough for installation.Please check the product specifications before installation.
*The stem length of this product is 230mm, the distance from the top of the under bracket to the bottom of the top bracket is 200mm when the included top nut is fully tightened, and the diameter is Φ23.Please measure the stock stem and frame to confirm
*Please have assembly work done in a specialist shop regarding motorcycle maintenance.
*Although these will be stock replacement parts, please make adjustments as necessary.
*We have not verified compatibility with other companies' products.
*Blinker brackets and headlight brackets are not included.
*As for the wheels, since the hubs for monkeys are used, spokes for monkeys are required.Also, centering is required.Adjustment parts other than the supplied parts are required, but please prepare them separately according to the wheel you use.
※ There may be some minor specification changes for each product.The actual product takes precedence over the images shown here, which may differ slightly from the images shown here.
※ After the start of riding, pay attention to the occurrence of so-called initial loosening and perform frequent inspections to prevent unexpected problems.
※ Some minor scratches and scuffs may occur due to transportation issues.
※ GM-MOTO does not accept returns for any reason after the product has been installed.In addition, problems after the start of driving are often caused by driving conditions, maintenance conditions, or a mismatch with the condition of the vehicle, and are difficult to distinguish from the causes of individual products. GM-MOTO is not responsible for any problems.
*Because it is made overseas, the molding, welding, painting, etc. may be insufficient.There may be some minor scratches and scuffs due to transportation problems.
*The image may contain other colors.
*There may be changes in product specifications due to the manufacturer's reasons.
*Ada kemungkinan sedikit perubahan pada spek komponennya.
*Saat dipasang di Dax, harap lepas stopper stang. Tidak semua tahun Dax segitiganya sama, mungkin saja panjangnya berbeda dan bisa menyebabkan produk ini tidak bisa dipakai.
*Panjang segitiga ini 230mm dan diameter 200mm dari bagian atas bracket bawah ke bagian bawah bracket atas dengan mur segitiga diameter 23 terpasang. Silakan cek tahun motor dan panjang segitiga.
*Silakan pasang ke mekanik atau bengkel profesional.
*Silakan lakukan penyesuaian saat pemasangan.
*Kesesuaian dengan produk merk lain tidak bisa kami konfirmasi.
*Bracket lampu sein dan lampu depan tidak termasuk.
*Velg didasarkan pada hub Monkey, jadi pakai jari-jari Monkey. Velg juga harus disejajarkan sesuai dengan velg yang dipakai.
*Foto produk sudah semirip mungkin dengan aslinya tapi mungkin akan ada sedikit perubahan spek.
*Beberapa saat setelah dipakai pertama kali cek apakah produk kendor
*Mungkin ada sedikit goresan karena proses pengiriman.
*Kami tidak menerima pengembalian jika bukan karena produk cacat sedari awal. Kesalahan pemasangan bukan tanggung jawab kami.
*Foto mungkin memuat produk dalam warna lain.
*Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan produsen. [Notes on purchase]
*All GM-MOTO products are custom parts.Since these products are set up in response to the requests of heavy users, there may be parts of the product that change or decrease from the original driving performance.Please use as dress-up parts for show model machines.Therefore, it is not suitable for driving on public roads or tracks.In some cases, it may not be possible to mount the unit on a motorcycle, or adjustments and modifications may be required in various areas.
*If the original handle lock plate is used, modification to the frame is required.Stock handle locks cannot be used.
*Please note that there may be slight specification changes in each part.In such a case, the actual item will be given priority, although it may differ from the image shown in the introduction.
*When installing on Dax, please remove the handle stopper.In the case of Dax, it is not available for all years.Depending on the model year, the stem may not be long enough for installation.Please check the product specifications before installation.
*The stem length of this product is 230mm, the distance from the top of the under bracket to the bottom of the top bracket is 200mm when the included top nut is fully tightened, and the diameter is Φ23.Please measure the stock stem and frame to confirm
*Please have assembly work done in a specialist shop regarding motorcycle maintenance.
*Although these will be stock replacement parts, please make adjustments as necessary.
*We have not verified compatibility with other companies' products.
*Blinker brackets and headlight brackets are not included.
*As for the wheels, since the hubs for monkeys are used, spokes for monkeys are required.Also, centering is required.Adjustment parts other than the supplied parts are required, but please prepare them separately according to the wheel you use.
※ There may be some minor specification changes for each product.The actual product takes precedence over the images shown here, which may differ slightly from the images shown here.
※ After the start of riding, pay attention to the occurrence of so-called initial loosening and perform frequent inspections to prevent unexpected problems.
※ Some minor scratches and scuffs may occur due to transportation issues.
※ GM-MOTO does not accept returns for any reason after the product has been installed.In addition, problems after the start of driving are often caused by driving conditions, maintenance conditions, or a mismatch with the condition of the vehicle, and are difficult to distinguish from the causes of individual products. GM-MOTO is not responsible for any problems.
*Because it is made overseas, the molding, welding, painting, etc. may be insufficient.There may be some minor scratches and scuffs due to transportation problems.
*The image may contain other colors.
*There may be changes in product specifications due to the manufacturer's reasons.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/