Kit Pelat Tautan

Nomor produk: K-LP-017SL
- IN STOCK
- Out Stock

KOOD
|
0.0
(0 ulasan)

Rp12,297,000

*Termasuk PPN 11%

Webike Points: +122,970 Points

Alamat Pengiriman

Mohon pilih varian produk terlebih dahulu.

to DKI Jakarta, Jakarta Selatan, Cilandak

Pilih Alamat

Biaya pengiriman Rp10,000

Cek kupon saya

Jumlah

100% Ori Garansi 7 hr Gratis Cashback Nett Tanpa Biaya Tambahan

Model yang Sesuai

Lihat Semua

Z900 18- Z900 RS 18- Z900 RS CAFE 18-

Tampilkan lebih banyak

Rincian Produk

Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik Lihat versi asli

Spesifikasi:

Termasuk baut dan mur chromoly khusus

Bahan Pelat Tautan: Aluminium 2017
Ketebalan pelat tautan: 10mm (sekitar. 2 kali lebih besar dari stok)

Bahan baut: baja molibdenum krom SCM435H/pemrosesan PPK
Mur pengunci : Lapisan Teflon

[Deskripsi]

Pelat penghubung dan baut terus-menerus dibebani dan mengalami lebih banyak penyalahgunaan daripada yang dapat Anda bayangkan.
KOOD menawarkan link plate & bolt, nut set yang memungkinkan suspensi belakang diatur pada posisi ideal dan tepat untuk memaksimalkan performa suspensi.

Pelat 3 titik, komponen utama suspensi belakang, dibuat seluruhnya dengan mesin CNC dari aluminium padat setebal 10 mm (Aluminium 2017).
Ketebalan pelat dua kali lebih tebal dari stok, meningkatkan kekuatan.
Lubang baut juga dikerjakan dengan akurasi 1/100mm.

Logo KOOD diekspresikan dengan proses ukiran mengambang yang jarang terlihat pada produk perusahaan lain.
Pelat tautan dianodisasi dalam tiga warna (perak, hitam, merah).
Kontur produk sesuai dengan aslinya dan tidak mengganggu bagian lain.
Linkage ratio sama dengan stock, jadi tidak perlu reset dan tidak perlu short side stand.

Tiga baut pelat tautan dikerjakan dari baja molibdenum krom SCM435H dan permukaannya diolah dengan "pemrosesan KDP" asli KOOD yang juga digunakan dalam balapan 8 jam Suzuka.
Baut atas dan bawah untuk suspensi belakang juga disertakan dan dibuat dengan cara yang sama seperti baut pelat sambungan.
Semua baut dilengkapi dengan mur pengunci berlapis Teflon. The link plates and bolts are constantly under load and are subjected to more abuse than you can imagine.
KOOD offers a link plate & bolt, nut set that allows the rear suspension to be set in the ideal and proper position to maximize the performance of the suspension.
The 3-point plate, the key component of the rear suspension, is machined entirely on a CNC machine from 10mm -thick solid aluminum (Aluminum 2017).
The plate thickness is twice as thick as stock, increasing strength.
Bolt holes are also machined with 1/100mm accuracy.
The KOOD logo is expressed by a floating engraving process that is rarely seen on other companies' products.
Link plates are anodized in three colors (silver, black, red).
The contour of the product is in accordance with the original and does not interfere with other parts.
The linkage ratio is the same as the stock one, so there is no need for resetting and no need for short side stand.
The three link plate bolts are machined from SCM435H chrome molybdenum steel and surface treated with KOOD's original "KDP processing" which is also used in the Suzuka 8-hours race.
The upper and lower bolts for the rear suspension are also included and are made in the same way as the link plate bolts.
All bolts are supplied with Teflon coated locknuts.
Set of machined link plates that are twice as thick as the stock plates and special chromoly long bolts.(Same dimensions as stock)
Running, turning, stopping.Link plates and bolts are constantly under load in all machine operations and are subjected to more abuse than you can imagine.
Highly rigid link plate and bolt/nut set that allows the rear suspension to be set in the ideal and proper position to maximize the performance of the suspension.
The 3-point plate, the key component of the rear suspension, is entirely machined from 10mm -thick solid aluminum (2017 material) using a CNC machining center.
Bolt holes finished to 1/100mm accuracy and the thickness of the plate from the counterbore is approximately twice that of the stock plate to increase strength.
The KOOD logo is expressed in a luxurious, embossed engraving process.
The surface treatment of the link plate is anodized in three colors.
All bolts are machined from SCM435H chrome molybdenum, and the surface treatment is our original KDP coating, which is also used in the Suzuka 8-hours endurance race.
■What is KDP Coating?
KDP coating, which further increases surface hardness to approximately double that of KOOD's 3-layer plating coating and lowers the coefficient of friction
Special surface treatment with "ternary alloy coating" and "heat treatment" developed based on the concept of "Fighting through the Suzuka 8-hour endurance road race! The special surface treatment with "ternary alloy film" and "heat treatment" was developed based on the concept of "Fighting the Suzuka 8 Hours Road Endurance Race!.
This is a very tough endurance race in which tires are frequently changed and shafts are frequently pulled out and inserted using impact wrenches in a short period of time.
This is an excellent surface treatment that improves durability, smoothness, and sliding properties, and was born from the pursuit of a strong surface hardness that fights through without galling, and slipperiness and wear resistance under high loads to achieve quick pit work that competes for 0.1 second under such conditions.

Peringatan

*Mungkin ada perubahan spesifikasi produk karena alasan pabrikan.

Model yang Sesuai

Z900 18- Z900 RS 18- Z900 RS CAFE 18-

Tampilkan lebih banyak

Link Laman Model

KAWASAKI

Kit Pelat Tautan

Model yang Sesuai

Rincian Produk

Spesifikasi:

[Deskripsi]

Peringatan

Model yang Sesuai

Link Laman Model

PRODUK YANG JUGA DILIHAT

Produk Siap Dikirim dari Gudang Jepang

Rekomendasi buat Kamu

Best Seller

Produk Teratas

New Custom Article

Gunakan kupon

Review Gambar

Review detail