Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat Semua
Rincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
[Deskripsi]
Programmable through software in a simple and fast way!
Through the appropriate wiring the JETPRIME is installed downstream of the standard control unit and before the throttle body.
In this way the signals sent by the standard control unit they can be modified according to your needs.
The JETPRIME makes it possible to change the fuel ratio going to change the time interval in which the injectors remain open during the aspiration phase.
Often standard motorcycles are limited due to compliance with anti-pollution regulations;performance can therefore be greatly improved and you can do it with this unit!
The JETPRIME control unit becomes essential if combined with a exhaust and a racing filter，as it requires an ad hoc carburetion.
The control unit can be programmed via PC thanks to the USB connection in a simple and intuitive way:just create a 2D carburetion chart.
With the supplied software，you can create your map by acting only on the arrow keys on the keyboard!
The control unit is connected to the injectors，to the IAT sensor and to the 12v derived from the key.
The connection to the IAT sensor allows the advance value to be changed without risking damage to the engine!
Through the appropriate wiring the JETPRIME is installed downstream of the standard control unit and before the throttle body.
In this way the signals sent by the standard control unit they can be modified according to your needs.
The JETPRIME makes it possible to change the fuel ratio going to change the time interval in which the injectors remain open during the aspiration phase.
Often standard motorcycles are limited due to compliance with anti-pollution regulations;performance can therefore be greatly improved and you can do it with this unit!
The JETPRIME control unit becomes essential if combined with a exhaust and a racing filter，as it requires an ad hoc carburetion.
The control unit can be programmed via PC thanks to the USB connection in a simple and intuitive way:just create a 2D carburetion chart.
With the supplied software，you can create your map by acting only on the arrow keys on the keyboard!
The control unit is connected to the injectors，to the IAT sensor and to the 12v derived from the key.
The connection to the IAT sensor allows the advance value to be changed without risking damage to the engine!
Catatan
* Gambar hanya untuk referensi. Gambar yang ditampilkan mungkin berbeda dari produk yang sebenarnya.
Peringatan
*If the instruction manual is included, it is in English.
*Please note that there are cases wherein the delivery date will be delayed because it is an imported product.
*Please note that the product specification may change due to manufacturer reasons.
*Please note that there are cases wherein the delivery date will be delayed because it is an imported product.
*Please note that the product specification may change due to manufacturer reasons.
