- Beranda
- Motor
- SUZUKI 126 - 250cc
- DR250S
- Sparepart Motor
- Sparepart Mesin
- Sparepart Intake
- Insulator/Manifold
- ATop
- ATop: Karet Intake Karburator
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
[Deskripsi]
Carburetor Joint for DR250S.
Although it is an Other Brand Product, it is of high quality and is used by many repairers..
If the intake manifold is damaged and cracked, secondary air is sucked in and the mixture becomes thinner..
If the air mixture becomes too thin, the temperature of the air-cooled engine will be too high, and at worst, the engine will burn out..
Also, at high RPM range, it will cause shortness of breath and loss of power..
DR250S intake manifold is made of rubber, which is susceptible to deterioration and requires regular maintenance..
Needs to be replaced..
Pateetc cracks and holes. It is safer to replace it with a new one than to repair it by filling it with a new one..
This intake manifold has a crimped O-ring, so a separate O-ring is not necessary..
Can be used as is.
Carburetor Joint for DR250S.
Although it is an Other Brand Product, it is of high quality and is used by many repairers..
If the intake manifold is damaged and cracked, secondary air is sucked in and the mixture becomes thinner..
If the air mixture becomes too thin, the temperature of the air-cooled engine will be too high, and at worst, the engine will burn out..
Also, at high RPM range, it will cause shortness of breath and loss of power..
DR250S intake manifold is made of rubber, which is susceptible to deterioration and requires regular maintenance..
Needs to be replaced..
Pateetc cracks and holes. It is safer to replace it with a new one than to repair it by filling it with a new one..
This intake manifold has a crimped O-ring, so a separate O-ring is not necessary..
Can be used as is.
Although it is an Other Brand Product, it is of high quality and is used by many repairers..
If the intake manifold is damaged and cracked, secondary air is sucked in and the mixture becomes thinner..
If the air mixture becomes too thin, the temperature of the air-cooled engine will be too high, and at worst, the engine will burn out..
Also, at high RPM range, it will cause shortness of breath and loss of power..
DR250S intake manifold is made of rubber, which is susceptible to deterioration and requires regular maintenance..
Needs to be replaced..
Pateetc cracks and holes. It is safer to replace it with a new one than to repair it by filling it with a new one..
This intake manifold has a crimped O-ring, so a separate O-ring is not necessary..
Can be used as is.
Carburetor Joint for DR250S.
Although it is an Other Brand Product, it is of high quality and is used by many repairers..
If the intake manifold is damaged and cracked, secondary air is sucked in and the mixture becomes thinner..
If the air mixture becomes too thin, the temperature of the air-cooled engine will be too high, and at worst, the engine will burn out..
Also, at high RPM range, it will cause shortness of breath and loss of power..
DR250S intake manifold is made of rubber, which is susceptible to deterioration and requires regular maintenance..
Needs to be replaced..
Pateetc cracks and holes. It is safer to replace it with a new one than to repair it by filling it with a new one..
This intake manifold has a crimped O-ring, so a separate O-ring is not necessary..
Can be used as is.
Peringatan
*Please note that the product specification may change due to manufacturer reasons.
*Please note that the product specification may change due to manufacturer reasons.
Model yang Sesuai
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/