- Beranda
- Sparepart Motor
- Kelistrikan
- Lampu
- Lampu Belakang
- KELLERMANN
- KELLERMANN: Bullet Atto RB JE
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Ukuran: 13x9x14mm
Posisi pemasangan: Lampu rem/lampu belakang
Warna lampu: Red
Pemasangan horizontal
Diameter yang sesuai: M5X0.5X6.5
Tegangan lampu rem/lampu belakang: 12v
Dibuat di Jepang
Kuat dan awet
Size:13X9X14mm
Mounting Position:Tail lights/braking lights
Light Color:Red
Horizontal Mounting
Corresponding Handlebar Diameter:M5X0.5X6.5
Japanese Vehicle Inspection Correspondence eMark E13 50R
Voltage for Tail/BrakeLight 12vSpec. for Vehicle
Full Japan Spec.
High Durability Products
Posisi pemasangan: Lampu rem/lampu belakang
Warna lampu: Red
Pemasangan horizontal
Diameter yang sesuai: M5X0.5X6.5
Tegangan lampu rem/lampu belakang: 12v
Dibuat di Jepang
Kuat dan awet
Size:13X9X14mm
Mounting Position:Tail lights/braking lights
Light Color:Red
Horizontal Mounting
Corresponding Handlebar Diameter:M5X0.5X6.5
Japanese Vehicle Inspection Correspondence eMark E13 50R
Voltage for Tail/BrakeLight 12vSpec. for Vehicle
Full Japan Spec.
High Durability Products
[Deskripsi]
The world's smallest LED taillight/braking light, Bullet Atto RB/Barrett Atto RB.
Fully Japan Spec with "JE" in the product name. It has been reborn as a highly durable product of.
Lens surface diameter is only 7mm.
BodySize is also 13X9X14mm ultra smallSize.
Watch is of course much smaller than Coin, and when the lights go out, you won't even notice its presence.
When lit, it has sufficient intensity of light and is visible even from 100m away..
This amount of light is the proof of Kellermann's high technology that made it possible for him to achieve this difficult commercialization..
Here's the answer to your hitherto unattainable Customization.
By the way, "Atto" means 10 to the 18th power of Minus 10, which represents our thoughts on the smallness of the product..
High powerLED Specification
Long Life Protection Guard® Adoption.
High-speed blinking at 330KHz by built-in IC control, low power consumption and long life
Adopted high quality METALHousing (Adopted lightweight, high-durability laminated galvanized steel sheet used for the exterior of the house)
■Nonconformity is not based on the number of watts of the light source or the area of the lighting section..
(Because they are tail/brake lamps that have been approved under Rule 50 of the Regulations, and are tail/brake lamps that have been designated as a device under Article 75-3, paragraph 1 of the Law, or tail/brake lamps that have equivalent performance.)
Show the EMark and 50R stamped or printed on the Body at the time of inspection.
FOR JAPAN MODEL authorized products are Japan Spec.. class
Kellerman Japan Spec. Item Confirmation Method FOR JAPAN MODEL regular Kellermann products are special specs for the Japan Market only.. *The optional bracket is [C00101-WH][C00102-BK].
When FOR JAPAN MODEL was first sold, there were more problems of unknown causes than Kellermann's standard..
The importer and Kellermann thoroughly investigated the cause of this.
With the cooperation of the customer, we received all kinds of information, including the vehicle, year, usage, and installation method, and after various verifications, we found that the cause was the hot and humid climate in Japan, which is different from that in the EU..
For Japan Model regular Kellermann products from January 2008 onward, special specs that have undergone a manufacturing process/inspection process exclusively for the Japan Market will be available.. it has become.
Bullet Atto has been further strengthened since October 23, 2011, and the body is now stamped with JE as a proof of this..
This Japan Spec.. Our products have achieved an astonishing defect rate of less than 0.2%..
If the product is accompanied by a JE mark and a certificate of guarantee issued by the importer, it is an authorized Japan Spec.. It is a testament to the.
The importer and Kellermann continue to improve the product by receiving information when defects occur..
M5-M8,M5-M10Conversion Adaptor available (Option) The world's smallest LED taillight/braking light, Bullet Atto RB/Barrett Atto RB.
Fully Japan Spec with "JE" in the product name. It has been reborn as a highly durable product of.
Lens surface diameter is only 7mm.
BodySize is also 13X9X14mm ultra smallSize.
Watch is of course much smaller than Coin, and when the lights go out, you won't even notice its presence.
When lit, it has sufficient intensity of light and is visible even from 100m away..
This amount of light is the proof of Kellermann's high technology that made it possible for him to achieve this difficult commercialization..
Here's the answer to your hitherto unattainable Customization.
By the way, "Atto" means 10 to the 18th power of Minus 10, which represents our thoughts on the smallness of the product..
High powerLED Specification
Long Life Protection Guard® Adoption.
High-speed blinking at 330KHz by built-in IC control, low power consumption and long life
Adopted high quality METALHousing (Adopted lightweight, high-durability laminated galvanized steel sheet used for the exterior of the house)
■Nonconformity is not based on the number of watts of the light source or the area of the lighting section..
(Because they are tail/brake lamps that have been approved under Rule 50 of the Regulations, and are tail/brake lamps that have been designated as a device under Article 75-3, paragraph 1 of the Law, or tail/brake lamps that have equivalent performance.)
Show the EMark and 50R stamped or printed on the Body at the time of inspection.
FOR JAPAN MODEL authorized products are Japan Spec.. class
Kellerman Japan Spec. Item Confirmation Method FOR JAPAN MODEL regular Kellermann products are special specs for the Japan Market only.. *The optional bracket is [C00101-WH][C00102-BK].
When FOR JAPAN MODEL was first sold, there were more problems of unknown causes than Kellermann's standard..
The importer and Kellermann thoroughly investigated the cause of this.
With the cooperation of the customer, we received all kinds of information, including the vehicle, year, usage, and installation method, and after various verifications, we found that the cause was the hot and humid climate in Japan, which is different from that in the EU..
For Japan Model regular Kellermann products from January 2008 onward, special specs that have undergone a manufacturing process/inspection process exclusively for the Japan Market will be available.. it has become.
Bullet Atto has been further strengthened since October 23, 2011, and the body is now stamped with JE as a proof of this..
This Japan Spec.. Our products have achieved an astonishing defect rate of less than 0.2%..
If the product is accompanied by a JE mark and a certificate of guarantee issued by the importer, it is an authorized Japan Spec.. It is a testament to the.
The importer and Kellermann continue to improve the product by receiving information when defects occur..
M5-M8,M5-M10Conversion Adaptor available (Option)
Fully Japan Spec with "JE" in the product name. It has been reborn as a highly durable product of.
Lens surface diameter is only 7mm.
BodySize is also 13X9X14mm ultra smallSize.
Watch is of course much smaller than Coin, and when the lights go out, you won't even notice its presence.
When lit, it has sufficient intensity of light and is visible even from 100m away..
This amount of light is the proof of Kellermann's high technology that made it possible for him to achieve this difficult commercialization..
Here's the answer to your hitherto unattainable Customization.
By the way, "Atto" means 10 to the 18th power of Minus 10, which represents our thoughts on the smallness of the product..
High powerLED Specification
Long Life Protection Guard® Adoption.
High-speed blinking at 330KHz by built-in IC control, low power consumption and long life
Adopted high quality METALHousing (Adopted lightweight, high-durability laminated galvanized steel sheet used for the exterior of the house)
■Nonconformity is not based on the number of watts of the light source or the area of the lighting section..
(Because they are tail/brake lamps that have been approved under Rule 50 of the Regulations, and are tail/brake lamps that have been designated as a device under Article 75-3, paragraph 1 of the Law, or tail/brake lamps that have equivalent performance.)
Show the EMark and 50R stamped or printed on the Body at the time of inspection.
FOR JAPAN MODEL authorized products are Japan Spec.. class
Kellerman Japan Spec. Item Confirmation Method FOR JAPAN MODEL regular Kellermann products are special specs for the Japan Market only.. *The optional bracket is [C00101-WH][C00102-BK].
When FOR JAPAN MODEL was first sold, there were more problems of unknown causes than Kellermann's standard..
The importer and Kellermann thoroughly investigated the cause of this.
With the cooperation of the customer, we received all kinds of information, including the vehicle, year, usage, and installation method, and after various verifications, we found that the cause was the hot and humid climate in Japan, which is different from that in the EU..
For Japan Model regular Kellermann products from January 2008 onward, special specs that have undergone a manufacturing process/inspection process exclusively for the Japan Market will be available.. it has become.
Bullet Atto has been further strengthened since October 23, 2011, and the body is now stamped with JE as a proof of this..
This Japan Spec.. Our products have achieved an astonishing defect rate of less than 0.2%..
If the product is accompanied by a JE mark and a certificate of guarantee issued by the importer, it is an authorized Japan Spec.. It is a testament to the.
The importer and Kellermann continue to improve the product by receiving information when defects occur..
M5-M8,M5-M10Conversion Adaptor available (Option) The world's smallest LED taillight/braking light, Bullet Atto RB/Barrett Atto RB.
Fully Japan Spec with "JE" in the product name. It has been reborn as a highly durable product of.
Lens surface diameter is only 7mm.
BodySize is also 13X9X14mm ultra smallSize.
Watch is of course much smaller than Coin, and when the lights go out, you won't even notice its presence.
When lit, it has sufficient intensity of light and is visible even from 100m away..
This amount of light is the proof of Kellermann's high technology that made it possible for him to achieve this difficult commercialization..
Here's the answer to your hitherto unattainable Customization.
By the way, "Atto" means 10 to the 18th power of Minus 10, which represents our thoughts on the smallness of the product..
High powerLED Specification
Long Life Protection Guard® Adoption.
High-speed blinking at 330KHz by built-in IC control, low power consumption and long life
Adopted high quality METALHousing (Adopted lightweight, high-durability laminated galvanized steel sheet used for the exterior of the house)
■Nonconformity is not based on the number of watts of the light source or the area of the lighting section..
(Because they are tail/brake lamps that have been approved under Rule 50 of the Regulations, and are tail/brake lamps that have been designated as a device under Article 75-3, paragraph 1 of the Law, or tail/brake lamps that have equivalent performance.)
Show the EMark and 50R stamped or printed on the Body at the time of inspection.
FOR JAPAN MODEL authorized products are Japan Spec.. class
Kellerman Japan Spec. Item Confirmation Method FOR JAPAN MODEL regular Kellermann products are special specs for the Japan Market only.. *The optional bracket is [C00101-WH][C00102-BK].
When FOR JAPAN MODEL was first sold, there were more problems of unknown causes than Kellermann's standard..
The importer and Kellermann thoroughly investigated the cause of this.
With the cooperation of the customer, we received all kinds of information, including the vehicle, year, usage, and installation method, and after various verifications, we found that the cause was the hot and humid climate in Japan, which is different from that in the EU..
For Japan Model regular Kellermann products from January 2008 onward, special specs that have undergone a manufacturing process/inspection process exclusively for the Japan Market will be available.. it has become.
Bullet Atto has been further strengthened since October 23, 2011, and the body is now stamped with JE as a proof of this..
This Japan Spec.. Our products have achieved an astonishing defect rate of less than 0.2%..
If the product is accompanied by a JE mark and a certificate of guarantee issued by the importer, it is an authorized Japan Spec.. It is a testament to the.
The importer and Kellermann continue to improve the product by receiving information when defects occur..
M5-M8,M5-M10Conversion Adaptor available (Option)
Catatan
[Part Number]KM1-158-120/[Integrated Part Number]KM158-100/KM158-150
[Part Number]KM1-158-220/[Integrated Part Number]KM158-200/KM158-250
[Part Number]KM1-159-120/[Integrated Part Number]KM159-100/KM159-150
[Part Number]KM1-158-220/[Integrated Part Number]KM158-200/KM158-250
[Part Number]KM1-159-120/[Integrated Part Number]KM159-100/KM159-150
[Part Number]KM1-158-120/[Integrated Part Number]KM158-100/KM158-150
[Part Number]KM1-158-220/[Integrated Part Number]KM158-200/KM158-250
[Part Number]KM1-159-120/[Integrated Part Number]KM159-100/KM159-150
[Part Number]KM1-158-220/[Integrated Part Number]KM158-200/KM158-250
[Part Number]KM1-159-120/[Integrated Part Number]KM159-100/KM159-150
Peringatan
*CANBUS-equipped vehicles may require a regulator.
*Please prepare the license plate light separately in case of replacement with the tail light which was also used as license plate light.
*We do not guarantee the operation or quality of the product when it is used together with regulators or relays made by other companies. When using regulators or relays, please use Kellermann products.
*Products are sold in units of one.
*The photo of the product is for reference only. The mounting model of the posted image, color, etc. may differ from the image.
*Product may partly differ in color/structure due to alteration in specifications.
*For the convenience of shooting, other products may be reflected in the image, but only the title product will be delivered.
*Other types and products may be included in the image.
*Please note that the product specification may change due to manufacturer reasons.
*CANBUS-equipped vehicles may require a regulator.
*Please prepare the license plate light separately in case of replacement with the tail light which was also used as license plate light.
*We do not guarantee the operation or quality of the product when it is used together with regulators or relays made by other companies. When using regulators or relays, please use Kellermann products.
*Products are sold in units of one.
*The photo of the product is for reference only. The mounting model of the posted image, color, etc. may differ from the image.
*Product may partly differ in color/structure due to alteration in specifications.
*For the convenience of shooting, other products may be reflected in the image, but only the title product will be delivered.
*Other types and products may be included in the image.
*Please note that the product specification may change due to manufacturer reasons.
*Please prepare the license plate light separately in case of replacement with the tail light which was also used as license plate light.
*We do not guarantee the operation or quality of the product when it is used together with regulators or relays made by other companies. When using regulators or relays, please use Kellermann products.
*Products are sold in units of one.
*The photo of the product is for reference only. The mounting model of the posted image, color, etc. may differ from the image.
*Product may partly differ in color/structure due to alteration in specifications.
*For the convenience of shooting, other products may be reflected in the image, but only the title product will be delivered.
*Other types and products may be included in the image.
*Please note that the product specification may change due to manufacturer reasons.
*CANBUS-equipped vehicles may require a regulator.
*Please prepare the license plate light separately in case of replacement with the tail light which was also used as license plate light.
*We do not guarantee the operation or quality of the product when it is used together with regulators or relays made by other companies. When using regulators or relays, please use Kellermann products.
*Products are sold in units of one.
*The photo of the product is for reference only. The mounting model of the posted image, color, etc. may differ from the image.
*Product may partly differ in color/structure due to alteration in specifications.
*For the convenience of shooting, other products may be reflected in the image, but only the title product will be delivered.
*Other types and products may be included in the image.
*Please note that the product specification may change due to manufacturer reasons.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/