Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat Semua
Rincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Aluminum Cut-out
Upper side suspension mounting hole:Φ10
Lower side suspension mounting holes:Φ10
Country of Origin:CHINA
manufacturer:KEPSPEED
Upper side suspension mounting hole:Φ10
Lower side suspension mounting holes:Φ10
Country of Origin:CHINA
manufacturer:KEPSPEED
[Deskripsi]
SUPER CUBetc. The full cover type rear suspension you see in the "Aluminum Cut-out High-end Spec.. The length was adjusted to FOR MONKEY in the following way!
The effective length is 250mm, shorter than OEM Length's 265mm (core-to-core) and the same as OEM's etc.. Three types are available:265mm for the first, 285mm for the second, and 285mm for the third..
Two colors are available:Silver and Black..
KEPSPEEDLogo and Gold Valve at the bottom is One point!
The sass is considerably softer than existing Chinese products..
Select this option on the Variation screen as the last resort for the appearance of the vehicle and the final adjustment of the ride height..
It's nice to see Spring's rolls, but this one is Stylish too!
In addition, it is easily washable!
Quantity:Pair (for Left and Right)1 pc each,Quantity:1 Set of 2pcs. The price is at!
GMStaff's Selfish Review
The appearance of the Cover is unquestionably finished!.
Full cover is the only item that can create a sense of luxury and classical atmosphere..
I mean, it's not luxury, it's luxury goods..
The cover is not just plastic, but cut-out aluminum, so it is quite expensive..
The anodized treatment provides excellent corrosion resistance..
This Suspension has a very soft finish!.
It's like the way Damper shrinks!.
The gold Breed valve-like object is probably a decoration or a pressure regulator inside the Cover..
I opened it and it didn't Smell Gas or Smell Oil..
Nothing special happened when I stretched and retracted it while it was open, so it's probably one of the above..
The effective length is 250mm, shorter than OEM Length's 265mm (core-to-core) and the same as OEM's etc.. Three types are available:265mm for the first, 285mm for the second, and 285mm for the third..
Two colors are available:Silver and Black..
KEPSPEEDLogo and Gold Valve at the bottom is One point!
The sass is considerably softer than existing Chinese products..
Select this option on the Variation screen as the last resort for the appearance of the vehicle and the final adjustment of the ride height..
It's nice to see Spring's rolls, but this one is Stylish too!
In addition, it is easily washable!
Quantity:Pair (for Left and Right)1 pc each,Quantity:1 Set of 2pcs. The price is at!
GMStaff's Selfish Review
The appearance of the Cover is unquestionably finished!.
Full cover is the only item that can create a sense of luxury and classical atmosphere..
I mean, it's not luxury, it's luxury goods..
The cover is not just plastic, but cut-out aluminum, so it is quite expensive..
The anodized treatment provides excellent corrosion resistance..
This Suspension has a very soft finish!.
It's like the way Damper shrinks!.
The gold Breed valve-like object is probably a decoration or a pressure regulator inside the Cover..
I opened it and it didn't Smell Gas or Smell Oil..
Nothing special happened when I stretched and retracted it while it was open, so it's probably one of the above..
Peringatan
*Because this product is made overseas, the molding, welding, painting, etc. may be incomplete. In addition, minor scratches and abrasions may occur due to transportation problems.
*It contains other parts in the photo.
*Please note that the product specification may change due to manufacturer reasons.
[Installation]
*Please assemble at a 4mini store or other store specializing in customization.
*The inner diameter of the support holes is 10mm in both the upper and lower sides.
*Please note that there may be some specification changes in minor details for each product. Please note that the actual product has priority over the images shown here, although there may be some differences.
*After the start of driving, pay attention to the occurrence of so-called "initial loosening" and perform frequent inspections to prevent unexpected problems.
[About the Manufacturer's Warranty]
*There are cases that the small scratches will occur due to transport problem.
*The warranty does not cover any defects other than those that seriously impair the value or function of the product.
*In addition, problems that occur after the start of driving are often caused by mismatches between driving conditions, maintenance conditions, or the condition of the vehicle, and are difficult to distinguish from individual product causes, so all such problems are exempt from liability.
[Notes on purchase]
*All GM-MOTO products are custom parts. These products are designed to meet the needs of heavy users, so there are some parts that may change or decrease the original driving performance. Please use them as dress-up parts for show model cars. Therefore, it is not suitable for public roads or circuits. In some cases, it may not be possible to mount the product on the motorcycle, or adjustments and modifications may be required.
*It contains other parts in the photo.
*Please note that the product specification may change due to manufacturer reasons.
[Installation]
*Please assemble at a 4mini store or other store specializing in customization.
*The inner diameter of the support holes is 10mm in both the upper and lower sides.
*Please note that there may be some specification changes in minor details for each product. Please note that the actual product has priority over the images shown here, although there may be some differences.
*After the start of driving, pay attention to the occurrence of so-called "initial loosening" and perform frequent inspections to prevent unexpected problems.
[About the Manufacturer's Warranty]
*There are cases that the small scratches will occur due to transport problem.
*The warranty does not cover any defects other than those that seriously impair the value or function of the product.
*In addition, problems that occur after the start of driving are often caused by mismatches between driving conditions, maintenance conditions, or the condition of the vehicle, and are difficult to distinguish from individual product causes, so all such problems are exempt from liability.
[Notes on purchase]
*All GM-MOTO products are custom parts. These products are designed to meet the needs of heavy users, so there are some parts that may change or decrease the original driving performance. Please use them as dress-up parts for show model cars. Therefore, it is not suitable for public roads or circuits. In some cases, it may not be possible to mount the product on the motorcycle, or adjustments and modifications may be required.
