- Beranda
- Motor
- HONDA 0 - 50cc
- MONKEY
- Sparepart Motor
- Suspensi / Rearset / Velg / Swingarm
- Swingarm
- G-Craft
- G-Craft: Swingarm Triple Square Middle Twin Lebar dengan Sway Bar
Swingarm Triple Square Middle Twin Lebar dengan Sway Bar
- Nomor produk: 90707
-
- NEW
- IN STOCK
- Out Stock
- G-Craft
- |
- 0.0
- (0 ulasan)
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Bahan / Finishing Aluminium
[Termasuk]
•Tiang rem spesial
•Mur, as spesial
Material / Surface treatmentAluminum
[Components]
・Special brake rod
・Special axle shafts, nuts
[Termasuk]
•Tiang rem spesial
•Mur, as spesial
Material / Surface treatmentAluminum
[Components]
・Special brake rod
・Special axle shafts, nuts
[Deskripsi]
Swingarm with triple square middle (60mm x 25mm pipe)
A back-pull type chain puller has been adopted to improve serviceability.
The pivot part is a bearing specification as a standard setting.
This product comes standard with interchangeable chain sliders (upper and lower) Swingarm with triple square middle (60mm x 25mm pipe)
A back-pull type chain puller has been adopted to improve serviceability.
The pivot part is a bearing specification as a standard setting.
This product comes standard with interchangeable chain sliders (upper and lower)
A back-pull type chain puller has been adopted to improve serviceability.
The pivot part is a bearing specification as a standard setting.
This product comes standard with interchangeable chain sliders (upper and lower) Swingarm with triple square middle (60mm x 25mm pipe)
A back-pull type chain puller has been adopted to improve serviceability.
The pivot part is a bearing specification as a standard setting.
This product comes standard with interchangeable chain sliders (upper and lower)
Catatan
* Produk ini dibuat berdasarkan pesanan. Kami akan mengonfirmasi waktu pengiriman setelah pesanan diterima.t berbeda dengan aslinya.
Peringatan
*For disc brakes, the length of the brake stopper must be 25mm from the tip.
*Fits up to 8 inch 4.0J, 10 inch 4.0J.(+4cm or more is required for 10 inch) When installing, G-Craft 7mm offset sprockets on the front and G-Craft 8mm sprocket spacers (or wide rear disc hub) on the rear are required.
*The rear shock is attached in the shape of "C", but there is no problem in use.
*The brake switch bracket may interfere with the brake switch due to individual differences in the bike body.In this case, the brake switch bracket must be bent to provide the necessary clearance for operation before installation.
*Other types and products may be included in the image.
*There may be changes in product specifications due to the manufacturer's reasons.
*For disc brakes, the length of the brake stopper must be 25mm from the tip.
*Fits up to 8 inch 4.0J, 10 inch 4.0J.(+4cm or more is required for 10 inch) When installing, G-Craft 7mm offset sprockets on the front and G-Craft 8mm sprocket spacers (or wide rear disc hub) on the rear are required.
*The rear shock is attached in the shape of "C", but there is no problem in use.
*The brake switch bracket may interfere with the brake switch due to individual differences in the bike body.In this case, the brake switch bracket must be bent to provide the necessary clearance for operation before installation.
*Other types and products may be included in the image.
*There may be changes in product specifications due to the manufacturer's reasons.
*Fits up to 8 inch 4.0J, 10 inch 4.0J.(+4cm or more is required for 10 inch) When installing, G-Craft 7mm offset sprockets on the front and G-Craft 8mm sprocket spacers (or wide rear disc hub) on the rear are required.
*The rear shock is attached in the shape of "C", but there is no problem in use.
*The brake switch bracket may interfere with the brake switch due to individual differences in the bike body.In this case, the brake switch bracket must be bent to provide the necessary clearance for operation before installation.
*Other types and products may be included in the image.
*There may be changes in product specifications due to the manufacturer's reasons.
*For disc brakes, the length of the brake stopper must be 25mm from the tip.
*Fits up to 8 inch 4.0J, 10 inch 4.0J.(+4cm or more is required for 10 inch) When installing, G-Craft 7mm offset sprockets on the front and G-Craft 8mm sprocket spacers (or wide rear disc hub) on the rear are required.
*The rear shock is attached in the shape of "C", but there is no problem in use.
*The brake switch bracket may interfere with the brake switch due to individual differences in the bike body.In this case, the brake switch bracket must be bent to provide the necessary clearance for operation before installation.
*Other types and products may be included in the image.
*There may be changes in product specifications due to the manufacturer's reasons.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/