Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Spesifikasi funnel Diameter bore Φ40 Body base: TMR40-36 Pitch karburator: Single Body Diameter luar spigot45mm Panjang spigot: 30mm
[Termasuk] Manifold
Perlu dudukan gas berikut - Set dudukan gas racing Yoshimura untuk TMR body besar (L=850mm) - Set dudukan gas racing Yoshimura untuk TMR body besar dengan saklar (L=850mm) (Ubah kabel coupler di sisi saklar)
[Part terpisah yang diperlukan] Set oil breather tank Yoshimura Secondary Air Blind Cap (2001 ke atas) Funnel Specification Bore DiameterΦ40 Base Body: TMR40-36 Carburetor Pitch: Single Body Spigot Outer Diameter45mm Spigot Length: 30mm
[Components] Manifold
One of the following throttle holder sets is required - Yoshimura Racing Throttle Holder Set for TMR Large Body (L=850mm) - Yoshimura Racing Throttle Holder Set for TMR Large Body with Switch (L=850mm) (Switch side coupler wiring needs to be changed)
[Required Parts (Sold Separately)] Yoshimura Oil Breather Tank Kit Secondary Air Blind Cap (2001 and later models)
Catatan
* Setelah dipesan, produk ini tidak dapat dibatalkan, dikembalikan, atau ditukar.
Peringatan
*Panjang kabel gas standar. Mungkin akan berbeda karena metode pemasangan. *Jika kran bensin bentrok saat pemasangan, Anda bisa mencegahnya dengan mengganti kran ke merk lain seperti dari merk Pingel (tidak ada untuk seri motor dengan fuel pump). *Pembatalan atau pengembalian produk tidak dapat dilakukan begitu produk dipesan.
*The length of the throttle wire is the standard setting.Please note that it may vary depending on the installation method. *If the fuel cock interferes with the installation, it may be possible to avoid it by replacing the cock with an external cock such as Pingel (not available for vehicles with fuel pump). * Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
