- Beranda
- Motor
- SUZUKI 251 - 400cc
- Impulse400 (GSX400 Impulse)
- Sparepart Motor
- Sparepart Mesin
- Sparepart Intake
- Karburator
- YOSHIMURA
- YOSHIMURA: Karburator TMR32 MIKUNI
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Diameter intake: Φ32
Body base: TMR32-D1
Pitch karburator: 77-85-77
Diameter luar spigot: 38mm
Panjang spigot: 28mm
[Termasuk]
•Funnel aluminium CNC Yoshimura
[Part terpisah yang diperlukan untuk pemasangan]
Perlu dudukan gas berikut.
*Set dudukan gas racing Yoshimura Untuk TMR body kecil (L=850mm)
•Set dudukan gas racing Yoshimura Untuk TMR body kecil dengan saklar (L=850mm) (Ubah kabel coupler di sisi saklar)
[Part terpisah yang diperlukan]
•Set oil breather tank Yoshimura
Intake Diameter:Φ32
Base Body:TMR32-D1
Carburetor Pitch :77-85-77
Spigot Outer Diameter :38mm
Spigot Length :28mm
[Included parts]
・Yoshimura original machined aluminum funnel
[Separately required parts for installation]
Either of the following throttle holder sets is required.
*Yoshimura Racing Throttle Holder Set for TMR Small Body (L=850mm)
・Yoshimura Racing Throttle Holder Set for TMR Small Body with Switch (L=850mm) (Switch side coupler wiring required to be changed)
[Parts required separately]
・Yoshimura Oil Breather Tank Kit
Body base: TMR32-D1
Pitch karburator: 77-85-77
Diameter luar spigot: 38mm
Panjang spigot: 28mm
[Termasuk]
•Funnel aluminium CNC Yoshimura
[Part terpisah yang diperlukan untuk pemasangan]
Perlu dudukan gas berikut.
*Set dudukan gas racing Yoshimura Untuk TMR body kecil (L=850mm)
•Set dudukan gas racing Yoshimura Untuk TMR body kecil dengan saklar (L=850mm) (Ubah kabel coupler di sisi saklar)
[Part terpisah yang diperlukan]
•Set oil breather tank Yoshimura
Intake Diameter:Φ32
Base Body:TMR32-D1
Carburetor Pitch :77-85-77
Spigot Outer Diameter :38mm
Spigot Length :28mm
[Included parts]
・Yoshimura original machined aluminum funnel
[Separately required parts for installation]
Either of the following throttle holder sets is required.
*Yoshimura Racing Throttle Holder Set for TMR Small Body (L=850mm)
・Yoshimura Racing Throttle Holder Set for TMR Small Body with Switch (L=850mm) (Switch side coupler wiring required to be changed)
[Parts required separately]
・Yoshimura Oil Breather Tank Kit
[Deskripsi]
Tersedia pemegang STDThrottle. Anda membutuhkan bagian-bagian berikut.
Throttle Grip Inner Pipe untuk TMRSmall body
Kawat adjusterX2 untuk dudukan throttle standar Stock throttle holder can be used.The required parts are as follows.
・Throttle Grip Inner Pipe for TMR Small Body
・Wire adjuster for stock throttle holder x 2
Throttle Grip Inner Pipe untuk TMRSmall body
Kawat adjusterX2 untuk dudukan throttle standar Stock throttle holder can be used.The required parts are as follows.
・Throttle Grip Inner Pipe for TMR Small Body
・Wire adjuster for stock throttle holder x 2
Catatan
* Setelah dipesan, produk ini tidak dapat dibatalkan, dikembalikan, atau ditukar.
Peringatan
* Panjang kabel throttle untuk operasi standar.
Panjang yang dibutuhkan mungkin berbeda tergantung bagaimana penanganannya.
* Ada bagian lain yang diperlukan untuk pemasangan.
* Gambar hanya untuk referensi. Mungkin berbeda dari produk yang sebenarnya.
* Harap perhatikan sebelumnya bahwa pembatalan dan / atau pengembalian produk ini tidak dapat diterima setelah pesanan telah ditempatkan. *The length of the throttle wire is the standard setting.Please note that it may vary depending on the installation method.
*Parts are required separately for installation.
*Images are for reference only.
*If the fuel cock interferes with the installation, it may be possible to avoid it by replacing the cock with an external cock such as Pingel (not available for vehicles with fuel pump).
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
Panjang yang dibutuhkan mungkin berbeda tergantung bagaimana penanganannya.
* Ada bagian lain yang diperlukan untuk pemasangan.
* Gambar hanya untuk referensi. Mungkin berbeda dari produk yang sebenarnya.
* Harap perhatikan sebelumnya bahwa pembatalan dan / atau pengembalian produk ini tidak dapat diterima setelah pesanan telah ditempatkan. *The length of the throttle wire is the standard setting.Please note that it may vary depending on the installation method.
*Parts are required separately for installation.
*Images are for reference only.
*If the fuel cock interferes with the installation, it may be possible to avoid it by replacing the cock with an external cock such as Pingel (not available for vehicles with fuel pump).
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
Model yang Sesuai
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/