- Beranda
- Perkakas
- Aksesoris Pemeliharaan
- amon
- amon: Lampu LED Triple Flat
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Rincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
untuk DC12V
LED 3 Bulb
[Warna]
Warna Terang : biru
[Konsumsi saat ini]
60mA
[Ketebalan Kabel]
Setara 0.2sq
[Panjang kabel]
200mm
[Bahan]
Kabel / Konduktor : Kawat Tembaga Anil untuk Listrik dan Penutup Isolasi : Vinyl Klorida, Pita Dua Sisi / Bahan Dasar : Busa polietilen / perekat : Perekat Sensitif Tekanan Akrilik
dengan Pita Dua Sisi DC12V only
3 LED lights
[Color]
Luminescence Color: Blue
[Current consumption]
60mA
[cord thickening]
Equivalent to 0.2sq
[length of cord]
200mm
[Material]
Cord / Conductor: Soft copper wire for electrical use, Insulation: vinyl chloride, Double-sided tape / Base material: foamed polyethylene, Adhesive: acrylic adhesive
Double-sided tape included
LED 3 Bulb
[Warna]
Warna Terang : biru
[Konsumsi saat ini]
60mA
[Ketebalan Kabel]
Setara 0.2sq
[Panjang kabel]
200mm
[Bahan]
Kabel / Konduktor : Kawat Tembaga Anil untuk Listrik dan Penutup Isolasi : Vinyl Klorida, Pita Dua Sisi / Bahan Dasar : Busa polietilen / perekat : Perekat Sensitif Tekanan Akrilik
dengan Pita Dua Sisi DC12V only
3 LED lights
[Color]
Luminescence Color: Blue
[Current consumption]
60mA
[cord thickening]
Equivalent to 0.2sq
[length of cord]
200mm
[Material]
Cord / Conductor: Soft copper wire for electrical use, Insulation: vinyl chloride, Double-sided tape / Base material: foamed polyethylene, Adhesive: acrylic adhesive
Double-sided tape included
[Deskripsi]
Perluasan atau penggantian pencahayaan dalam ruangan
Flat LED tipis dan cerah
[Instruksi instalasi]
1. Putuskan sambungan terminal Minus di Baterai untuk alasan keamanan.
2. Hubungkan kabel merah ke Plus (mis. Catu daya ACC).
3. Hubungkan kabel hitam ke Minus Anda (mis. Dasar tubuh).
4. Pasang terminal Minus Baterai.
[Cara memasang penutup lensa]
1. Harap pasang LED Datar pada penutup Lensa Jumlah: Set.
2. Dorong LED Datar ke dalam penutup lensa sampai Anda mendengarnya berderak ..
3. Harap bersihkan kotoran dan minyak dari Flat LED dan tempelkan Double-sided Tape padanya ..
4. Bersihkan kotoran dan minyak dari area yang akan dipasang, dan tekan dengan kuat untuk memperbaikinya di tempatnya .. ●Addition or replacement of indoor lighting
●Thin and bright flat LED
[Installation Instructions]
1. Remove the negative terminal of the battery for safety.
2. Connect the red cord to the positive (e.g. ACC power).
3. Connect the black cord to the negative (e.g. body ground).
4. Install the negative terminal of the battery.
[How to install the lens cover]
1. Place the flat LED into the lens cover.
2. Push the flat LED into the lens cover until you hear a crack.
3. Remove dirt and oil from the flat LED, and apply double-sided tape and crimp it.
4. Remove dirt and oil from the installation area and firmly crimp and fix it.
Flat LED tipis dan cerah
[Instruksi instalasi]
1. Putuskan sambungan terminal Minus di Baterai untuk alasan keamanan.
2. Hubungkan kabel merah ke Plus (mis. Catu daya ACC).
3. Hubungkan kabel hitam ke Minus Anda (mis. Dasar tubuh).
4. Pasang terminal Minus Baterai.
[Cara memasang penutup lensa]
1. Harap pasang LED Datar pada penutup Lensa Jumlah: Set.
2. Dorong LED Datar ke dalam penutup lensa sampai Anda mendengarnya berderak ..
3. Harap bersihkan kotoran dan minyak dari Flat LED dan tempelkan Double-sided Tape padanya ..
4. Bersihkan kotoran dan minyak dari area yang akan dipasang, dan tekan dengan kuat untuk memperbaikinya di tempatnya .. ●Addition or replacement of indoor lighting
●Thin and bright flat LED
[Installation Instructions]
1. Remove the negative terminal of the battery for safety.
2. Connect the red cord to the positive (e.g. ACC power).
3. Connect the black cord to the negative (e.g. body ground).
4. Install the negative terminal of the battery.
[How to install the lens cover]
1. Place the flat LED into the lens cover.
2. Push the flat LED into the lens cover until you hear a crack.
3. Remove dirt and oil from the flat LED, and apply double-sided tape and crimp it.
4. Remove dirt and oil from the installation area and firmly crimp and fix it.
Peringatan
* Harap pastikan untuk membaca peringatan di bagian belakang paket sebelum menggunakan. *
*Before use, please read the instructions on the back of the package.*
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/