Kembali ke atas

JP Moto-Mart (DURA-BOLT)

JP Moto-Mart menyediakan beragam jenis aksesoris, seperti cover tangki, footstep, spion, baut aluminium anodisasi dan masih banyak lagi dengan harga yang terjangkau.

4.2
(321 Ulasan)

5

Sangat Baik

156

4

Baik

104

3

Sedang

44

2

Buruk

7

1

Sangat Buruk

10

Ulasan Produk JP Moto-Mart (DURA-BOLT)

Kaca Film ViewTech untuk Spion Mantap! Kaca Film ViewTech untuk Spion Mantap! Kaca Film ViewTech untuk Spion Mantap!

The titanium alloy and taper cap bolt made from a DEYURA bolt I got the friend to yield!!
To it being convenient, M10x40 (pitch 1.25) is two!!
We and these two bolts were treated to the fastening bolt for the brakes calipers of W650!! Probably, it is standard tactics to treat a flange hexagon head bolt, when replacing the bolt for brakes calipers.
.
.
(it is because the outside [ bolt / of an inner hexagon head ] hexagon head bolt is stronger, a tool is not chosen but conclusion by high torque is easy.) -- however, the titanium-alloy bolt transferred by the friend is a taper cap bolt lately.
I understand that this inner hexagon head bolt is a bolt for the upper persons who choose a tool.
Moreover, if it is not technical capabilities of an upper level in bolt manufacture, it will also be the form which is easy to cause a fracture.
.
.
The titanium alloy and taper cap bolt made from the DEYURA bolt here,
It is TSU with very best looks which is carrying out the very fascinating surface!! Since cutting processing is also polite,
I think that it is a Hideyasu bolt!! (by cutting of the hexagon socket which has not caught the center of the bolt head which tends to be in a crude taper cap bolt)
I think that there is no fracture in use of the bolt to the product made from a DEYURA bolt. However, inner hexagon head bolts, such as a cap bolt and a taper cap bolt, are also bolts which choose a tool.
if a wrench with accuracy or low reinforcement (HRC hardness) is used -- NAME -- I am easy -- it is also a bolt!! In Webike, when purchasing the cap bolt and taper cap bolt made from a titanium alloy, I also recommend the purchase of a high-quality wrench.
I think that the wrench of Mytho Roy, TONE, or PB is suitable!! Looks are TSU which brings about an impression cool as it is in a picture and which is a taper cap bolt!!
It may also be the characteristics of a cap bolt or a taper cap bolt that many benefits obtained from the performance which the bolt has will become fabrication easily simultaneously if the technical capabilities of choosing a tool and a manufacturer are not an upper level.
.
.
a delicate taper cap bolt -- general -- the maximum -- it is one of the lightweight bolts.
I think that a feeling of possession and a degree of satisfaction are high products if careful of handling.
Postscript: When using it for the fastening bolt for brakes calipers of W650, the titanium washer made from POJIPORINI (M10) is needed.

The titanium alloy and taper cap bolt made from a DEYURA bolt I got the friend to yield!!
To it being convenient, M10x40 (pitch 1.25) is two!!
We and these two bolts were treated to the fastening bolt for the brakes calipers of W650!! Probably, it is standard tactics to treat a flange hexagon head bolt, when replacing the bolt for brakes calipers.
.
.
(it is because the outside [ bolt / of an inner hexagon head ] hexagon head bolt is stronger, a tool is not chosen but conclusion by high torque is easy.) -- however, the titanium-alloy bolt transferred by the friend is a taper cap bolt lately.
I understand that this inner hexagon head bolt is a bolt for the upper persons who choose a tool.
Moreover, if it is not technical capabilities of an upper level in bolt manufacture, it will also be the form which is easy to cause a fracture.
.
.
The titanium alloy and taper cap bolt made from the DEYURA bolt here,
It is TSU with very best looks which is carrying out the very fascinating surface!! Since cutting processing is also polite,
I think that it is a Hideyasu bolt!! (by cutting of the hexagon socket which has not caught the center of the bolt head which tends to be in a crude taper cap bolt)
I think that there is no fracture in use of the bolt to the product made from a DEYURA bolt. However, inner hexagon head bolts, such as a cap bolt and a taper cap bolt, are also bolts which choose a tool.
if a wrench with accuracy or low reinforcement (HRC hardness) is used -- NAME -- I am easy -- it is also a bolt!! In Webike, when purchasing the cap bolt and taper cap bolt made from a titanium alloy, I also recommend the purchase of a high-quality wrench.
I think that the wrench of Mytho Roy, TONE, or PB is suitable!! Looks are TSU which brings about an impression cool as it is in a picture and which is a taper cap bolt!!
It may also be the characteristics of a cap bolt or a taper cap bolt that many benefits obtained from the performance which the bolt has will become fabrication easily simultaneously if the technical capabilities of choosing a tool and a manufacturer are not an upper level.
.
.
a delicate taper cap bolt -- general -- the maximum -- it is one of the lightweight bolts.
I think that a feeling of possession and a degree of satisfaction are high products if careful of handling.
Postscript: When using it for the fastening bolt for brakes calipers of W650, the titanium washer made from POJIPORINI (M10) is needed.

We always use this Nut when exchanging Sprocket.
Accuracy and making are firm and installation is completely no problem.
Customized feeling improves greatly simply by exchanging with NORMAL very beautifully in the state of Anodized.
There were things that the accuracy was solid, so there was no problem in the installation.
After all it's okay if you can use it in various places as soon as the price becomes cheaper.

Because we have arranged Gold in some places
I bought it with other shopping.

Somewhat, it became fashionable.
I am satisfied because I can purchase at this price.
I will replace it when it becomes useless.

Followability to Tank shape is not bad.
Since air bubbles are conspicuous, sticking attention.
But even if that is noticed, it seems to be used for a long time.

I purchased JSM Aluminum Billet Footpeg board Hole cap for fixing.

The coloring of Anodized is good and the satisfaction level is high.

Since Color line nap also has 7 colors, body color etc. etc. I think that it is easy to match with.

I think it is expensive as it costs more than 300 yen per Bolt 1 pc, but I think that BoltCustom got a sense of coming out so it's not a waste.

Just replacing OEM's undiscovered Bolt with Bolt with anodized finish, it is recommended because you can turn on Accent.

我系webike度买左呢款油箱盖螺丝,品质真系好,同原厂的螺丝比绝对有得挥,而且颜色选择多,想个性化改装摩托的车友可以选择这款油箱盖螺丝,绝对ok,我买的黑色,其他颜色看上去都很不错的样子,先用着,以后想改再买! I am the webike to buy the left side of the fuel tank cap screws, the quality is really good, the original screw ratio is absolutely worthwhile, and the color choice is more, the car owners who want to personalize the modified motorcycle can choose this fuel tank cap screw, absolutely Ok, I bought black, other colors look very good, first use, and later want to change and buy again!(translated by Google Translator)