- Beranda
- Motor
- HONDA 0 - 50cc
- GYRO50 (GYRO X)
- Sparepart Motor
- Kelistrikan
- Lampu
- Lampu Depan
- Lampu Depan
- SPUNKYS
- SPUNKYS: Satu Set Lampu Depan Dual Bates 2 untuk GYRO X
Satu Set Lampu Depan Dual Bates 2 untuk GYRO X
- Nomor produk: 323
-
- IN STOCK
- Out Stock
- SPUNKYS
- |
- 0.0
- (0 ulasan)
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
[Deskripsi]
Set termasuk penyangga yang dapat dipasang dengan atau tanpa rak depan pabrik dan lampu depan tinggi / rendah yang dapat diganti.
Biasanya, kedua bohlam itu sulit untuk dinyalakan karena besarnya listrik yang dihasilkan oleh moped, jadi salah satu bohlam disetel ke rendah dan yang lainnya disetel ke tinggi.. Oleh karena itu, kedua lampu dapat diatur antara tinggi dan rendah ..
Selain itu, tidak seperti bohlam H4, PH7 memiliki bohlam lebih panjang yang menonjol dari tutupnya, jadi kami merancang lampu Bates dari awal dan memastikan ada jarak yang cukup antara bohlam dan bagian lensa ..
(Kabel khusus disertakan untuk memudahkan proses pemasangan kabel untuk lampu depan ..
Saya melepas lampu depan dari Gyro X dan membersihkan area setang, dan saya perlu memindahkan sinyal belok juga ..
Anda dapat memasang sinyal belok berdiameter 10mm dengan lubang 10mm, tetapi Anda juga dapat memasang sinyal belok berdiameter 8mm dengan mesin cuci ..
Saat memasang kit lampu depan tanpa melepas rak depan pabrik, kit lampu depan dipasang dengan menggunakan penahan khusus, tetapi mur pengunci otomatis nilon disertakan untuk mencegah kit kendor karena getaran. Mitigasi ..
Lampu depan memiliki sekrup pengatur sudut sehingga Anda dapat mengatur sumbu optik. This set includes a bracket that can be installed with or without the stock front carrier and a headlight that can be switched between high and low.
Normally, it is difficult to light both lights with the amount of electricity generated by a moped, so one side is usually set to low and the other to high, but in order to light both, I set the bulb to PH7 18/18W.Therefore, both lights can be switched between high and low.
Also, unlike ordinary H4 bulbs, PH7 bulbs have a long part protruding from the socket, so the Bates light was designed from scratch to ensure sufficient clearance between the bulb and the lens.
Special wiring is included to make wiring the headlights easier during installation.
When the headlight of the GYRO X is removed and the handlebar area is cleared, it is necessary to relocate the blinker as well, so the bracket has a hole for the blinker.
The 10mm holes allow for the installation of 10Φ blinkers, but 8Φ blinkers can also be installed with the addition of washers.
When installing the headlight kit with the GYRO X stock front carrier, use the special bracket to mount the headlight kit. This will prevent the nuts from loosening due to vibration during driving.
The headlight is equipped with an angle adjustment screw so that the optical axis can be adjusted.
Biasanya, kedua bohlam itu sulit untuk dinyalakan karena besarnya listrik yang dihasilkan oleh moped, jadi salah satu bohlam disetel ke rendah dan yang lainnya disetel ke tinggi.. Oleh karena itu, kedua lampu dapat diatur antara tinggi dan rendah ..
Selain itu, tidak seperti bohlam H4, PH7 memiliki bohlam lebih panjang yang menonjol dari tutupnya, jadi kami merancang lampu Bates dari awal dan memastikan ada jarak yang cukup antara bohlam dan bagian lensa ..
(Kabel khusus disertakan untuk memudahkan proses pemasangan kabel untuk lampu depan ..
Saya melepas lampu depan dari Gyro X dan membersihkan area setang, dan saya perlu memindahkan sinyal belok juga ..
Anda dapat memasang sinyal belok berdiameter 10mm dengan lubang 10mm, tetapi Anda juga dapat memasang sinyal belok berdiameter 8mm dengan mesin cuci ..
Saat memasang kit lampu depan tanpa melepas rak depan pabrik, kit lampu depan dipasang dengan menggunakan penahan khusus, tetapi mur pengunci otomatis nilon disertakan untuk mencegah kit kendor karena getaran. Mitigasi ..
Lampu depan memiliki sekrup pengatur sudut sehingga Anda dapat mengatur sumbu optik. This set includes a bracket that can be installed with or without the stock front carrier and a headlight that can be switched between high and low.
Normally, it is difficult to light both lights with the amount of electricity generated by a moped, so one side is usually set to low and the other to high, but in order to light both, I set the bulb to PH7 18/18W.Therefore, both lights can be switched between high and low.
Also, unlike ordinary H4 bulbs, PH7 bulbs have a long part protruding from the socket, so the Bates light was designed from scratch to ensure sufficient clearance between the bulb and the lens.
Special wiring is included to make wiring the headlights easier during installation.
When the headlight of the GYRO X is removed and the handlebar area is cleared, it is necessary to relocate the blinker as well, so the bracket has a hole for the blinker.
The 10mm holes allow for the installation of 10Φ blinkers, but 8Φ blinkers can also be installed with the addition of washers.
When installing the headlight kit with the GYRO X stock front carrier, use the special bracket to mount the headlight kit. This will prevent the nuts from loosening due to vibration during driving.
The headlight is equipped with an angle adjustment screw so that the optical axis can be adjusted.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/