- Beranda
- Motor
- HONDA 126 - 250cc
- PCX150
- Sparepart Motor
- Kelistrikan
- Lampu
- Relay Lampu Sein
- B-MOON FACTORY
- B-MOON FACTORY: Bohlam Lampu Sein LED dan Digital Relay
Bohlam Lampu Sein LED dan Digital Relay
- Nomor produk: BMF-213
-
- IN STOCK
- Out Stock
- B-MOON FACTORY
- |
- 2.7
- (3 ulasan)
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
[Deskripsi]
Ini adalah satu set baru lampu kedip LED PCX depan dan belakang 4psc dan relai digital Jepang dan kabel lampu indikator LED.
Dimungkinkan untuk menggunakan kedip LED depan dan belakang dengan menggunakan relai ini.
Selain itu, ini beroperasi dengan kedipan yang sama bahkan jika menggunakan 2 bohlam LED.
Produk ini direkomendasikan untuk orang yang ingin menghemat daya tidak seperti relay resistif.
Untuk pemasangan, lepaskan relai OEM, pasang dengan coupler, masukkan garis minus dengan coupler terpasang dan selesaikan pekerjaan. This is a new set of PCX LED indicator bulbs front and rear 4psc, Japanese digital relay and LED indicator light wire.
By using this relay, it becomes possible to use the LED indicator of the front and rear.
In addition, the same blink rate will work even if two LEDs and two bulbs are used.
Unlike resistive relays, this product is recommended for those who want to save power.
To install, remove the stock relay, install it with the coupler, and insert the negative wire with the attached coupler to finish the work.
Dimungkinkan untuk menggunakan kedip LED depan dan belakang dengan menggunakan relai ini.
Selain itu, ini beroperasi dengan kedipan yang sama bahkan jika menggunakan 2 bohlam LED.
Produk ini direkomendasikan untuk orang yang ingin menghemat daya tidak seperti relay resistif.
Untuk pemasangan, lepaskan relai OEM, pasang dengan coupler, masukkan garis minus dengan coupler terpasang dan selesaikan pekerjaan. This is a new set of PCX LED indicator bulbs front and rear 4psc, Japanese digital relay and LED indicator light wire.
By using this relay, it becomes possible to use the LED indicator of the front and rear.
In addition, the same blink rate will work even if two LEDs and two bulbs are used.
Unlike resistive relays, this product is recommended for those who want to save power.
To install, remove the stock relay, install it with the coupler, and insert the negative wire with the attached coupler to finish the work.
Peringatan
*Saat pemasangan, pastikan untuk mematikan kunci utama dan mematikan daya.
*Please make sure to turn off the key and disconnect the battery before starting the work.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/