- Beranda
- Motor
- HARLEY-DAVIDSON 1001cc -
- SOFTAIL
- Sparepart Motor
- Sparepart Stang & Kemudi
- Sistem Kendali
- Kabel Gas / Kabel Kopling / Kabel Choke
- KIJIMA
- KIJIMA: Kabel Idle (Back Side)
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
[Informasi Terkait] Bentuk Port Masuk: Samping Kabel Idle = Tipe Kabel 1/4-20
[Ukuran]
Panjang Housing: 1035
Panjang Travel: 100
Panjang Konektor L: 133
Ukuran Konektor L: 45 Derajat
[Tipe] Armor Coat
[Spesifikasi] Stainless Steel Mesh [Corresponding Information] Lever Side Insertion Port Shape: Idle Side = 1/4-20 Screw Type
[Size]
Housing Length: 1035
Travel Length: 100
Elbow Length: 133
Elbow Angle: 45-degrees
[Type] Armor Coat
[Specification] Stainless Steel Mesh
[Ukuran]
Panjang Housing: 1035
Panjang Travel: 100
Panjang Konektor L: 133
Ukuran Konektor L: 45 Derajat
[Tipe] Armor Coat
[Spesifikasi] Stainless Steel Mesh [Corresponding Information] Lever Side Insertion Port Shape: Idle Side = 1/4-20 Screw Type
[Size]
Housing Length: 1035
Travel Length: 100
Elbow Length: 133
Elbow Angle: 45-degrees
[Type] Armor Coat
[Specification] Stainless Steel Mesh
[Deskripsi]
Ini termasuk dengan penutup karet pada bagian logam pengatur dan sisi Tyco di sisi selongsong throttle.
Kabel STD ditentukan sebagai kawat baja bertulang yang dililitkan di sekitar rumahan untuk memastikan jarak bebas kabel dalam. Ini menggunakan selongsong nilon yang menjamin umur panjang dan pengoperasian yang lancar di semua kabel. Rubber cover for adjuster bracket and throttle sleeve side with tycoon included.
The standard cable has a reinforced steel wire wrapped around the housing to ensure proper clearance of the inner wire.A nylon sleeve is used on all cables to ensure long life and smooth operation.
Kabel STD ditentukan sebagai kawat baja bertulang yang dililitkan di sekitar rumahan untuk memastikan jarak bebas kabel dalam. Ini menggunakan selongsong nilon yang menjamin umur panjang dan pengoperasian yang lancar di semua kabel. Rubber cover for adjuster bracket and throttle sleeve side with tycoon included.
The standard cable has a reinforced steel wire wrapped around the housing to ensure proper clearance of the inner wire.A nylon sleeve is used on all cables to ensure long life and smooth operation.
Catatan
* Gambar hanya untuk referensi. Gambar yang ditampilkan mungkin berbeda dari produk yang sebenarnya.
Peringatan
*Ukuran produk dapat berbeda sebesar beberapa milimeter.
*Karburator S&S yang sekarang, dengan beberapa pengecualian, menggunakan kabel untuk karbu CV. Harap cek kabel yang Anda gunakan. *The dimensions shown may vary from the actual product by a few millimeters.
*Current S&S carburetors, with a few exceptions, use the cables for CV carb.Be sure to check the cable you are using.
*Karburator S&S yang sekarang, dengan beberapa pengecualian, menggunakan kabel untuk karbu CV. Harap cek kabel yang Anda gunakan. *The dimensions shown may vary from the actual product by a few millimeters.
*Current S&S carburetors, with a few exceptions, use the cables for CV carb.Be sure to check the cable you are using.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/