- Beranda
- Motor
- HONDA 751 - 1000cc
- CBR1000RR Fireblade
- Sparepart Motor
- Suspensi / Rearset / Velg / Swingarm
- Foot Control
- Rearset
- TSR
- TSR: Rearset Standar 2 Posisi (Pergantian Reverse)
Rearset Standar 2 Posisi (Pergantian Reverse)
- Nomor produk: 50000-S77-B2000
-
- IN STOCK
- Out Stock
- TSR
- |
- 5.0
- (1 ulasan)
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
[Spesifikasi]
Pergantian reverse (racing)
Dapat menggunakan saklar lampu rem bawaan
Pergerakan posisi footstep: Mundur 40mm, Naik 40mm / 51mm [Specifications]
Reverse Change (Racing Change) Kit
stock Brake Lamp Switch Attachable
Step Bar Position Travel: Back 40mm, Up 40mm / 51mm
Pergantian reverse (racing)
Dapat menggunakan saklar lampu rem bawaan
Pergerakan posisi footstep: Mundur 40mm, Naik 40mm / 51mm [Specifications]
Reverse Change (Racing Change) Kit
stock Brake Lamp Switch Attachable
Step Bar Position Travel: Back 40mm, Up 40mm / 51mm
[Deskripsi]
Ini menggunakan duralumin ekstra (Bahan A7075) untuk pedal pelat tangga dan menjalani analisis kekuatan dan kekakuan dengan perangkat lunak 3D dan Pengurangan Bobot menyeluruh.
Ini adalah model kelas atas yang memanfaatkan teknik desain mesin kerja secara ekstensif.
Dibandingkan dengan step standar yang dibuat oleh TSR, step plate dikerjakan dengan permukaan miring untuk memungkinkan step bar dipasang di dalam bodi sekitar 7 mm.
Menggunakan step bar berbentuk yang diadopsi pada mobil # 22 (Satu HATI. Honda Team Asia) dari balapan ketahanan Suzuka 8 jam. The step plate and pedals are made of super duralumin (A7075 material), and strength and rigidity analyses were conducted using 3D software to thoroughly reduce weight.
This is a high-end model that makes extensive use of works machine design techniques.
The step plate is sloped to allow the step bar to be mounted 7mm closer to the inside of the vehicle than the TSR stock step.
The step bar is the same shape as the one used for the #22 vehicle (Satu HATI. HONDA Team Asia) in the Suzuka 8 Hours.
Ini adalah model kelas atas yang memanfaatkan teknik desain mesin kerja secara ekstensif.
Dibandingkan dengan step standar yang dibuat oleh TSR, step plate dikerjakan dengan permukaan miring untuk memungkinkan step bar dipasang di dalam bodi sekitar 7 mm.
Menggunakan step bar berbentuk yang diadopsi pada mobil # 22 (Satu HATI. Honda Team Asia) dari balapan ketahanan Suzuka 8 jam. The step plate and pedals are made of super duralumin (A7075 material), and strength and rigidity analyses were conducted using 3D software to thoroughly reduce weight.
This is a high-end model that makes extensive use of works machine design techniques.
The step plate is sloped to allow the step bar to be mounted 7mm closer to the inside of the vehicle than the TSR stock step.
The step bar is the same shape as the one used for the #22 vehicle (Satu HATI. HONDA Team Asia) in the Suzuka 8 Hours.
Peringatan
*Memerlukan pemotongan cowl asli di sisi pedal operan.
*Bagian belakang heel guard berbeda dengan contoh di foto. *For installation, it is necessary to cut the stock cowl on the change pedal side.
*The image is a prototype and the processing of the back side of the heel guard is different from the production version.
*Bagian belakang heel guard berbeda dengan contoh di foto. *For installation, it is necessary to cut the stock cowl on the change pedal side.
*The image is a prototype and the processing of the back side of the heel guard is different from the production version.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/