- Beranda
- Motor
- KTM 251 - 400cc
- 390DUKE
- Sparepart Motor
- Bodywork
- Bracket Box
- World Walk
- World Walk: Bracket Box
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
[Ukuran pelat atas]
Lebar maksimum : Sekitar 240mm
Lebar minimum : Sekitar 150mm
Panjang Depan / Belakang : Sekitar 250mm
[Daya Dukung Maksimum] 5kg
[Bahan]
Tubuh : Lukisan Baja / Uretana Hitam
Mounting Bolt : Besi tahan karat
[Waktu kerja instalasi] 0,5 jam
[Negara Asal] Buatan Jepang
[Top panel size]
・Maximum width: Approx. 240mm
・Minimum width: Approx. 150mm
・Front and rear length: Approx. 250mm
[Maximum loading capacity] 5kg
[Material]
・Body: Steel / Black urethane paint finish
・Mounting bolts: Stainless steel
[Installation time] 0.5h
[Country of Origin] Made in Japan
Lebar maksimum : Sekitar 240mm
Lebar minimum : Sekitar 150mm
Panjang Depan / Belakang : Sekitar 250mm
[Daya Dukung Maksimum] 5kg
[Bahan]
Tubuh : Lukisan Baja / Uretana Hitam
Mounting Bolt : Besi tahan karat
[Waktu kerja instalasi] 0,5 jam
[Negara Asal] Buatan Jepang
[Top panel size]
・Maximum width: Approx. 240mm
・Minimum width: Approx. 150mm
・Front and rear length: Approx. 250mm
[Maximum loading capacity] 5kg
[Material]
・Body: Steel / Black urethane paint finish
・Mounting bolts: Stainless steel
[Installation time] 0.5h
[Country of Origin] Made in Japan
[Deskripsi]
DUKE 125/250/390 yang diproduksi di India disebut seri Small Duke dan merupakan salah satu yang paling populer di jajaran KTM karena harganya yang terjangkau!. Kami telah membuat pembawa belakang yang muat untuk tiga kendaraan dengan mesin berkapasitas berbeda, tetapi dengan tampilan yang sama ..
Desainnya sangat mirip Worldwalk, dengan kombinasi besi baja tipis untuk kekuatannya ..
1. Tinggi panel atas hampir sama dengan jok tandem
Ketinggian panel atas disesuaikan dengan tinggi pabrik sehingga dapat memuat barang-barang yang panjang.. Ini untuk mencegah tutup terlipat saat kotak belakang dipasang.
2. Tidak mengganggu desain stok yang tajam
Kaki-kaki yang menopang papan atas ditempatkan di sepanjang cowl dan papan atas memiliki desain yang tajam dengan mempersempit sisi belakang agar tidak merusak citra kendaraan.
3. Ukuran panel atas adalah 250mmX240mm.
Ukuran bagian atas sangat berbeda antara bagian lebar dan sempit, karena desain ekor DUKE meruncing tajam ke arah belakang ..
4. Kapasitas beban 5kg
Pilar yang menopang papan atas telah diperkuat untuk menahan beban hingga 5kg. Kotak belakang besar bisa dipasang ..
5. Baut pemasangan terbuat dari baja tahan karat
Baut untuk memasang carrier belakang terbuat dari stainless steel tahan karat. 125 / 250 / 390DUKE produced in India is called the Small DUKE series and is popular in the KTM lineup because of its low price.World Walk has created a rear carrier that fits three vehicles with different displacement engines, but with a common appearance.
It is designed to be strong by combining thin steel round bars.
1. The height of the top panel is roughly the same as the pillion seat
The height of the top panel is adjusted to the stock height so that long items can be loaded.The reason why the rear box is slightly raised is to prevent the lid from retracting when the rear box is installed.
2. Does not disrupt the sharp design of the stock
The legs that support the top panel are designed along the cowl, and the top panel is narrowed at the back side to keep the image of the vehicle.
3. Top board size is 250mm x 240mm
The size of the top panel differs greatly between the wide part and the narrow part in accordance with the tail design of DUKE which tapers sharply toward the back.
4. Load capacity is 5kg
The load-bearing capacity is 5kg with reinforcement in the pillar supporting the top board.A large rear box can also be installed.
5. Mounting bolts are stainless steel
The bolts used to mount the rear rack are made of stainless steel to prevent rusting.
Desainnya sangat mirip Worldwalk, dengan kombinasi besi baja tipis untuk kekuatannya ..
1. Tinggi panel atas hampir sama dengan jok tandem
Ketinggian panel atas disesuaikan dengan tinggi pabrik sehingga dapat memuat barang-barang yang panjang.. Ini untuk mencegah tutup terlipat saat kotak belakang dipasang.
2. Tidak mengganggu desain stok yang tajam
Kaki-kaki yang menopang papan atas ditempatkan di sepanjang cowl dan papan atas memiliki desain yang tajam dengan mempersempit sisi belakang agar tidak merusak citra kendaraan.
3. Ukuran panel atas adalah 250mmX240mm.
Ukuran bagian atas sangat berbeda antara bagian lebar dan sempit, karena desain ekor DUKE meruncing tajam ke arah belakang ..
4. Kapasitas beban 5kg
Pilar yang menopang papan atas telah diperkuat untuk menahan beban hingga 5kg. Kotak belakang besar bisa dipasang ..
5. Baut pemasangan terbuat dari baja tahan karat
Baut untuk memasang carrier belakang terbuat dari stainless steel tahan karat. 125 / 250 / 390DUKE produced in India is called the Small DUKE series and is popular in the KTM lineup because of its low price.World Walk has created a rear carrier that fits three vehicles with different displacement engines, but with a common appearance.
It is designed to be strong by combining thin steel round bars.
1. The height of the top panel is roughly the same as the pillion seat
The height of the top panel is adjusted to the stock height so that long items can be loaded.The reason why the rear box is slightly raised is to prevent the lid from retracting when the rear box is installed.
2. Does not disrupt the sharp design of the stock
The legs that support the top panel are designed along the cowl, and the top panel is narrowed at the back side to keep the image of the vehicle.
3. Top board size is 250mm x 240mm
The size of the top panel differs greatly between the wide part and the narrow part in accordance with the tail design of DUKE which tapers sharply toward the back.
4. Load capacity is 5kg
The load-bearing capacity is 5kg with reinforcement in the pillar supporting the top board.A large rear box can also be installed.
5. Mounting bolts are stainless steel
The bolts used to mount the rear rack are made of stainless steel to prevent rusting.
Model yang Sesuai
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/