- Beranda
- Sparepart Motor
- Knalpot
- Knalpot Slip-on
- GUTSCHROME
- GUTSCHROME: Knalpot Megafon Beld Replika
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Baja Berlapis Chrome
Mounting Bracket disertakan
Pabrikan: Toko Psikologi
Ukuran M
Garis Besar Panjang Keseluruhan: 51cm
Port Penyisipan3/8: Untuk 1-3/4" (45mm kompatibel) Bagian terbesar OD: 77.6mm
Ukuran L
Garis Besar Panjang Keseluruhan: 57cm
Port Penyisipan3/8: Untuk 1-3/4" (45mm kompatibel) Bagian terbesar OD: 77.6mm Steel with chrome plating finish
Mounting bracket included
Manufacturer: Psycle Shop
[Size]
■Size S
・Total length: 47cm
・Plug in: For 1-3/4" (for 45mm)
・Maximum part outer diameter: 77.6mm
■Size M
・Total length: 51cm
・Plug in: For 1-3/4" (for 45mm)
・Maximum part outer diameter: 77.6mm
■Size L
・Total length: 57cm
・Plug in: For 1-3/4" (for 45mm)
・Maximum part outer diameter: 77.6mm
Mounting Bracket disertakan
Pabrikan: Toko Psikologi
Ukuran M
Garis Besar Panjang Keseluruhan: 51cm
Port Penyisipan3/8: Untuk 1-3/4" (45mm kompatibel) Bagian terbesar OD: 77.6mm
Ukuran L
Garis Besar Panjang Keseluruhan: 57cm
Port Penyisipan3/8: Untuk 1-3/4" (45mm kompatibel) Bagian terbesar OD: 77.6mm Steel with chrome plating finish
Mounting bracket included
Manufacturer: Psycle Shop
[Size]
■Size S
・Total length: 47cm
・Plug in: For 1-3/4" (for 45mm)
・Maximum part outer diameter: 77.6mm
■Size M
・Total length: 51cm
・Plug in: For 1-3/4" (for 45mm)
・Maximum part outer diameter: 77.6mm
■Size L
・Total length: 57cm
・Plug in: For 1-3/4" (for 45mm)
・Maximum part outer diameter: 77.6mm
[Deskripsi]
Psycle Shop Knalpot Beld Megaphone Replika Asli di Kanagawa.
Ini adalah replika dari "SABRE (PEDANG) Knalpot Megafon 3 Inch" yang dijual oleh Dixie's PartsBrand SUPERIOR (TombakBelakang) !.
Sistem pembuangan khusus dengan ujung berbentuk lonceng di ujung Megaphone yang populer dari tahun 50-an hingga 70-an..
Biasa disebut "pengocok koktail" karena struktur dan bentuknya..
Bridge terpasang di bagian belakang Exhaust System dan sistem pemasangan yang dapat digeser maju mundur secara luas dengan Bracket tipe J-Hook dan dapat disesuaikan dan diperbaiki..
Ini adalah Gunung gaya sekolah lama, meskipun sedikit tidak halus dibandingkan dengan yang modern..
Tipe tanpa Clamp juga dijual di SUPERIOR, tetapi tipe dengan Clamp direproduksi..
Dilengkapi dengan Clamp terintegrasi yang dibrazing.
Selain standar 1-3/4 inci (44,5 mm) pipa, pipa 45mm, yang banyak digunakan di FOR JAPAN MODEL karena kurangnya distribusi material, juga tersedia..
Untuk mencegah kelonggaran berlebihan pada pipa Inch, pemasangan diatur sedikit ketat untuk pipa Milimeter, tetapi dapat dipasang tanpa masalah..
Jenis pelat "DoubleBaffle" yang dapat dengan mudah dilepas dengan YAMAHA Super JOGZr Wing BlackNut juga diproduksi ulang..
Flare pendek di ujung bell tip tentu saja direproduksi, dan sekrup Minus digunakan untuk attachment.. Psycle Shop Original Replica Beld Megaphone exhaust in Kanagawa.
This is a replica of the "SABRE 3 inch megaphone exhaust" that was sold by Dixie's SUPERIOR parts brand.
A custom exhaust with a bell-shaped tip on the end of the megaphone, popular from the 50s to the 70s.
It is commonly called a "cocktail shaker" because of its structure and shape.
The bridge on the back of the exhaust and the J-hook type bracket slide back and forth widely, and the mounting system can be adjusted and fixed.
It is an old school style mount, though a little unrefined compared to modern ones.
SUPERIOR was also sold without the clamp, but the type with the clamp is reproduced.
With brazed integral clamps.
In addition to the standard 1-3/4 inch (44.5mm) pipe, the socket can be used for 45mm pipe, which is widely substituted in Japan due to lack of material distribution.
In order to avoid too much clearance for inch pipe, it is a little tight for mm pipe.
The plate type "double baffle" that can be easily detached with a wing nut is reproduced as well.
The short flare at the tip of the bell-tip is also reproduced, and a flat head screw is used for mounting.
Ini adalah replika dari "SABRE (PEDANG) Knalpot Megafon 3 Inch" yang dijual oleh Dixie's PartsBrand SUPERIOR (TombakBelakang) !.
Sistem pembuangan khusus dengan ujung berbentuk lonceng di ujung Megaphone yang populer dari tahun 50-an hingga 70-an..
Biasa disebut "pengocok koktail" karena struktur dan bentuknya..
Bridge terpasang di bagian belakang Exhaust System dan sistem pemasangan yang dapat digeser maju mundur secara luas dengan Bracket tipe J-Hook dan dapat disesuaikan dan diperbaiki..
Ini adalah Gunung gaya sekolah lama, meskipun sedikit tidak halus dibandingkan dengan yang modern..
Tipe tanpa Clamp juga dijual di SUPERIOR, tetapi tipe dengan Clamp direproduksi..
Dilengkapi dengan Clamp terintegrasi yang dibrazing.
Selain standar 1-3/4 inci (44,5 mm) pipa, pipa 45mm, yang banyak digunakan di FOR JAPAN MODEL karena kurangnya distribusi material, juga tersedia..
Untuk mencegah kelonggaran berlebihan pada pipa Inch, pemasangan diatur sedikit ketat untuk pipa Milimeter, tetapi dapat dipasang tanpa masalah..
Jenis pelat "DoubleBaffle" yang dapat dengan mudah dilepas dengan YAMAHA Super JOGZr Wing BlackNut juga diproduksi ulang..
Flare pendek di ujung bell tip tentu saja direproduksi, dan sekrup Minus digunakan untuk attachment.. Psycle Shop Original Replica Beld Megaphone exhaust in Kanagawa.
This is a replica of the "SABRE 3 inch megaphone exhaust" that was sold by Dixie's SUPERIOR parts brand.
A custom exhaust with a bell-shaped tip on the end of the megaphone, popular from the 50s to the 70s.
It is commonly called a "cocktail shaker" because of its structure and shape.
The bridge on the back of the exhaust and the J-hook type bracket slide back and forth widely, and the mounting system can be adjusted and fixed.
It is an old school style mount, though a little unrefined compared to modern ones.
SUPERIOR was also sold without the clamp, but the type with the clamp is reproduced.
With brazed integral clamps.
In addition to the standard 1-3/4 inch (44.5mm) pipe, the socket can be used for 45mm pipe, which is widely substituted in Japan due to lack of material distribution.
In order to avoid too much clearance for inch pipe, it is a little tight for mm pipe.
The plate type "double baffle" that can be easily detached with a wing nut is reproduced as well.
The short flare at the tip of the bell-tip is also reproduced, and a flat head screw is used for mounting.
Peringatan
*Ukuran tubuh sama untuk M dan L. Panjang ujung lonceng berbeda.
* Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan pabrikan.
*Body size is same for S/M/L. Bell end length is different.
*There may be changes in product specifications due to the manufacturer's reasons.
* Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan pabrikan.
*Body size is same for S/M/L. Bell end length is different.
*There may be changes in product specifications due to the manufacturer's reasons.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/