Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Tegangan: DC12V Daya: Hi Beam 30W / Lo Beam 30W LED: CREE XLamp XP-L LED Suhu warna: 6000K Warna: White Pengganti lampu LED standar Pancaran maksimum Hi Beam: 39, 600cd 600cd Jumlah: LED (1 lampu)
Isi produk [Bahan] Lampu depan multireflektor Bohlam LED H4 12V 30/30W Controller unit Kabel sambungan
Rated Voltage: DC12V Power Consumption: Hi Beam 30W / Lo Beam 30W LED: CREE XLamp XP-L LEDs Color Temperature: 6000K Color: White Normal LED Light Replacement Type Hi Beam Maximum Luminous Intensity: 39,600cd 600cd Format of stock bulb: LED (1 light) Approximate working time: 90 minutes
Components [Material]ulti reflector headlight H4 LED bulb 12V 30/30W Controller unit Connection harness
[Deskripsi]
Kombinasi lampu depan multi-reflektor dan LED H4 (30w) memberikan kecerahan yang jauh melampaui LED normal!
Kit lampu depan 19-W800 yang meningkatkan kecerahan hanya dengan mengganti lampu depan LED biasa. Warna terangnya putih 6000 Kelvin. Dapat digunakan dengan lampu depan stok untuk inspeksi kendaraan. Warna spacer 8mm ketebalan 23-24mm diperlukan.
Apakah Anda merasa lampu depan LED bawaan terlalu gelap? Lampu depan LED normal '19- W800 Lo beam menyala pada 7w dan seterang bohlam halogen. Jika Anda berpikir bahwa LED lebih terang daripada bohlam konvensional, Anda akan kecewa dengan kecerahan LED biasa. Berbeda dengan lampu depan jenis bohlam, lampu depan LED biasa tidak dapat dicerahkan dengan menggantinya dengan LED eksternal. Produk ini memungkinkan untuk memasang bohlam LED Protec H4 dengan mengganti unit lampu depan, dan lampu depan akan terlahir kembali berkali-kali lebih terang.
Lensa multi-reflektor yang bersih dan jernih Permukaan lensa lampu depan LED biasa memiliki dasar LED yang diatur secara horizontal, dan banyak pengguna merasa tidak nyaman dengan desain lampu depan. Dengan menggunakan lensa multi-reflektor yang sudah dikenal, dimungkinkan untuk menciptakan tampilan yang bersih dan jernih. Lampu depan berukuran hampir sama dengan lampu biasa, sehingga ideal dan seimbang untuk bodi W800.
Pilihan suhu warna : 6000K atau 3000K Anda dapat memilih dari dua warna : 6000 Kelvin, yang merupakan warna khas LED biru-putih, dan 3000 Kelvin, yang merupakan warna bohlam halogen yang lebih klasik.
Kepatuhan dengan standar inspeksi kendaraan! Intensitas cahaya maksimum diukur menjadi 39.600 candela, yang lebih tinggi dari 15.000 candela, nilai standar untuk lulus inspeksi kendaraan. Intensitas cahaya maksimum adalah 39.600 candela, lebih tinggi dari standar 15.000 candela. Protec telah memperkenalkan penguji lampu depan HT-322 yang dibuat oleh BANZAI untuk mengukur selama pengembangan. Dalam kasus LHL-K03/LHL-K04, beberapa lampu depan eksternal mungkin tidak memenuhi nilai standar karena masalah struktural.
Penggunaan LED CREE yang andal! Sebanyak enam LED CREE XLamp XP-L digunakan untuk elemen pemancar cahaya, tiga di sisi balok Hi dan tiga di sisi balok Lo.
Pendinginan kipas angin listrik yang tahan air LED yang sangat terang menghasilkan banyak panas karena arus inputnya yang tinggi. Untuk mendinginkan panas, produk ini mengadopsi sistem pendingin menggunakan kipas listrik tahan air yang sangat tahan lama. Ini adalah fitur penting untuk mempertahankan kecerahan yang stabil.
Dimensi lampu depan yang bisa dipasang LHL-K03, LHL-K04 Silakan lihat dimensi lampu depan normal seri '19- W800 yang ditunjukkan pada gambar dan siapkan lampu depan yang dapat dipasang secara terpisah. Jika lebar casing lampu depan terlalu kecil, gunakan spacer collar 8mm yang tersedia di pasaran.
Bagian yang diperlukan secara terpisah LBH-K03, LBH-K04 Lebar bodi lampu depan produk ini adalah 175mm. Jarak antara penahan lampu utama di sisi kendaraan lebih lebar, sehingga perlu dipasang spacer collar setebal 23-24mm di salah satu sisi antara lampu depan dan penahan lampu depan. Harap persiapkan secara terpisah. Silakan merujuk ke produk yang tercantum di bawah ini. k・con Aluminium spacer collar [Perak No.0900-093-00031 8.2 / Diameter luar 20 X tebal 8 ... 2 buah. No.0900-093-00057 8.2 / od. 20 X tebal 15 ... 2 buah. Atau k・con Aluminium spacer collar [Hitam No.0900-093-02031 8.2 / od. 20 X tebal 8 ... 2 buah. No.0900-093-02057 8.2 / diameter luar 20 x tebal 15 ... 2 buah.
The combination of the multi-reflector headlight and H4 LED (30W) realizes a brightness that far surpasses the normal LED!
'19 - Headlight kit to increase brightness by simply replacing the stock LED headlights on the W800. Luminescence color is white 6000 Kelvin.
Spacer collar Φ8mm thickness 23-24mm is required.
Do you feel that the stock LED headlights are too dim? '19- The stock LED headlight Lo beam on the W800 is on at 7w and is as bright as a halogen bulb. If you look at the image that LED is brighter than conventional bulbs, you will be disappointed in the brightness of normal LED. Unlike the bulb type headlight, the stock LED headlight can not be brightened by replacing with aftermarket LED. This product enables to install PROTEC H4 LED bulb by replacing the headlight unit, and the headlight will be many times brighter.
Sleek multi-reflector lens The LED base is placed horizontally on the lens surface of the stock LED headlight, so it is heard that many users feel uncomfortable with the design of the headlight. The familiar multi-reflector lens can be used to create a clean look and feel. The headlight is the same size as the stock headlight, so it fits the W800 perfectly.
Available color temperatures are 6000K and 3000K Please select your favorite color from two colors: 6000 Kelvin, which is a typical LED blue-white color, and 3000 Kelvin, which is a classic halogen bulb color.
The maximum luminous intensity is 39,600 candela. The optical axis can be adjusted to the standard range without shifting. Protec has introduced BANZAI's HT-322 headlight tester to measure the headlights during development. *Measured values are based on the headlight supplied with LBH-K03 / LBH-K04.In the case of LHL-K01 / LHL-K02, some aftermarket headlights may not meet the standard value due to structural problems.
Adoption of reliable CREE's LED! A total of 6 CREE XLamp XP-L LEDs (3 for Hi beam and 3 for Lo beam) are used as light emitters.
Waterproof Electric Fan Cooling A really bright LED generates heat due to the large input current and becomes hot. In order to cool down the heat, this product adopts a cooling system with a highly durable waterproof electric fan. It is essential equipment to maintain stable brightness.
Mountable headlight dimensions LHL-K03, LHL-K04 Please refer to the '19- W800 series stock headlight dimensions in the image and prepare the headlight that can be installed separately. *If the width of the headlight case is too small, please use a commercially available Φ8mm spacer collar.
Separately required parts LBH-K03, LBH-K04 The width of the headlight is 175mm. Since the distance between the headlight brackets on the vehicle side is wider, it is necessary to install a spacer collar of 23-24mm thickness on one side between the headlight and the headlight bracket. Please prepare it separately by yourself.Please refer to the following products. k・con Aluminum Spacer Collar [Silver] ・No.0900-093-00031 Φ8.2 / Outer diameter 20 x Thickness 8 - 2pcs ・No.0900-093-00057 Φ8.2 / Outer diameter 20 x Thickness 15 - 2pcs Or, k・con Aluminum Spacer Collar [Black] ・No.0900-093-02031 Φ8.2 / Outer diameter 20 x Thickness 8 - 2pcs ・No.0900-093-02057 Φ8.2 / Outer diameter 20 x Thickness 15 - 2pcs
Peringatan
*Memerlukan dua collar dengan ketebalan 23-24mm dan lubang 8mm. *Memerlukan 2 x K-con spacer aluminium Kitaco (Φ8.2/20x8) and 2 x Φ8.2/20x15. *Jika lebar batok lampu kecil, gunakan spacer collar 8mm. *Ikuti manual pemasangan dengan seksama. Metode pemasangan yang salah dapat menyebabkan percikan api dan kerusakan produk. *Sebelum pemasangan, harap cek skun kabel di sisi minus (-) aki dan pastikan kuncinya dalam keadaan OFF. *Jangan sentuh atau mengotori chip LED. Tutup akrilik yang terpasang ke bohlam LED memiliki seal. *Produk ini memiliki presisi tinggi sehingga harap berhati-hati. Jangan jatuhkan produk atau menarik kabel dengan paksa. Kecerobohan saat menggunakan produk dapat mengakibatkan produk tidak berfungsi dengan baik, memantik api, menyebabkan cedera, dan kejadian buruk lainnya. Jangan sampai produk mengeluarkan percikan api, mengalami arus pendek, dll karena akan merusaknya. *Jangan bongkar produk apapun kejadiannya. *Jangan lihat langsung ke cahaya LED karena bisa merusak mata. *Jangan sampai mika lampu terkena air ketika lampu menyala atau baru saja dimatikan karena dapat merusak mika dan bohlam. *Jangan pegang bohlam, bracket belakang, atau controller unit karena panas. *Hanya untuk sepeda motor. *Jangan tutupi produk dengan kertas atau kain dan jangan taruh di dekat benda yang mudah terbakar. *Jangan pakai produk saat lampu depan masih menyala karena bisa rusak dan menyebabkan luka bakar. *Produk ini waterproof namun tidak sepenuhnya. Harap tutupi bagian sambungan dari controller dengan tape waterproof atau produk sejenis. Jangan sampai kena basah terus menerus. *Saat mencuci motor, jangan arahkan selang ke produk ini. *Jangan jatuhkan bohlam atau controller unit atau membuatnya terhentak karena bisa mengurangi performanya atau bahkan merusaknya. *Saat merakit lampu LED, pastikan untuk membalurkan cairan gemuk silikon yang sudah disertakan sesuai dengan petunjuk dalam manual pemasangan/ *Jangan tutupi kipas waterproofnya. Pastikan ada celah untuk sirkulasi udara. *Gunakan lem drat jika baut longgar. Kencangkan baut secara berkala. *Pasang produk ke mekanik yang paham betul dengan produk ini. *Pastikan sudut as lampu sudah benar sebelum berkendara karena pancarannya jika tidak pas bisa mengakibatkan kecelakaan. *Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan produsen.
*Two spacer collars of 23-24mm thickness and Φ8mm holes are required for installation. *2 pieces of Kitaco K-con Aluminum Spacer Collars Φ8.2 / 20 X 8 and 2 pieces of Φ8.2 / 20 X 15 are required. *The maximum luminous intensity is measured by the headlight attached to LBH-K03 / LBH-K04.In the case of LHL-K01 / LHL-K02, some aftermarket headlights may not meet the standard value due to structural problems. *If the width of the headlight case is too small, please use a commercially available Φ8mm spacer collar. *Install the product correctly according to the instruction manual.Improper installation may result in fire or equipment damage. *Before installation, be sure to disconnect the terminal cord on the minus side of the battery and confirm that the key is OFF. *Please do not touch or get the LED chip dirty.Dirt can cause the LED chip to burn due to heat being built-up.The LED bulb comes with an acrylic cap with a sealing seal. *Please handle this product with care as it is a precision instrument.Do not drop the product or pull the wires forcibly.Improper handling may cause malfunction, injury, burns, or serious accidents that may result in death.In addition, sparks, poor insulation, or short-circuiting may cause a failure of the product or a fire in the vehicle. *Do not disassemble or modify this product in any way.Products that have been disassembled or modified are not covered by warranty. *Do not look directly at the LED light when it is on.It can cause visual impairment. *Do not splash water on the lens while the light is on or immediately after it is turned off.Sudden temperature change may cause damage to the lens or LED bulb.In addition, please do not touch the LED bulb itself, the heat sink behind it, and the controller unit because they get to the high temperature. *This product is for motorcycles only, so cannot be used on four-wheeled vehicles.This product is not for use on automobiles. *Do not cover with paper or cloth and do not light near flammable materials.Failure to do so may result in fire or abnormal heating.Also, do not light near flammable items such as flammable spray, thinner, etc. or items that may ignite. *Do not install to the headlight with the light on.Failure to do so may result in malfunction or burns. *This product is waterproof for daily life, but it is not completely waterproof.Wrap the coupler coming out of the controller unit with vinyl tape or self-bonding tape, or use caulking agent to waterproof it.Avoid wetting the product with more water than necessary. *When washing a vehicle with a high pressure washer, please do not let the high pressure wash directly hit this product. *Please do not drop the LED bulb or controller unit, or give it a strong shock.It not only causes breakage, deterioration of performance and shortening of service life, but also causes injury. *When assembling the LED bulb, be sure to apply the supplied silicon grease to the areas indicated by the grease marks in the instruction manual. *Do not cover up the waterproof fan.Make sure that there is enough space behind the fan for the sucked air to flow. *Use a thread locker to prevent loosening of the threaded part.Periodic retightening is also recommended. *Installation requires expertise and skill.Please have it done at a designated maintenance facility with skilled mechanics. *Please adjust the optical axis before use.It may obstruct the view of oncoming vehicles and cause traffic accidents.
*PROTEC is not responsible for any damage or accident caused by the use of this product.Protec will not be responsible for any labor charges or other costs incurred during repair. *If you feel any abnormality during installation or use, please contact your dealer or PROTEC service department. *There may be changes in product specifications due to the manufacturer's reasons.
